BM-PEG3
Based on 1 Customer Validation
BM-PEG3 is a PEG-based PROTAC linker that can be used in the synthesis of PROTACs.
Nur für Forschungszwecke. Wir verkaufen nicht an Patienten.
- Reinheit: 98.0%
- CAS. Nr.: 86099-06-1
- Formel: C16H20N2O7
- Molecular Weight:352.34
-
Speicherung:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 6 months , -20°C, 1 month
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Biologische Aktivität
-
Chemical Information
-
Lösungsmittel & Löslichkeit
- Reinheit & Dokumentation
- Verweise
-
Help & FAQs
Alle PROTAC Linkers Isoform-spezifische Produkte anzeigen
More
Biologische Aktivität
|
PEGs |
PROTACs contain two different ligands connected by a linker; one is a ligand for an E3 ubiquitin ligase and the other is for the target protein. PROTACs exploit the intracellular ubiquitin-proteasome system to selectively degrade target proteins[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Chemical Information
-
CAS. Nr. 86099-06-1
-
Appearance Solid
-
Molecular Weight 352.34
-
Formel C16H20N2O7
-
Color White to light yellow
-
SMILES
O=C(C=CC1=O)N1CCOCCOCCOCCN2C(C=CC2=O)=O
-
Synonyms
1,11-Bis-maleimidotetraethyleneglycol
-
Versand
Room temperature in continental US; may vary elsewhere.
-
Speicherung
Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
Lösungsmittel & Löslichkeit
DMSO : 100 mg/mL (283.82 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Konzentration (Stammlösung) × Volumen (Stammlösung) = Konzentration (Ziellösung) × Volumen (Ziellösung)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Reinheit & Dokumentation
-
Data Sheet (269 KB)
-
SDS (393 KB)
- English - EN (393 KB)
- Français - FR (393 KB)
- Deutsch - DE (393 KB)
- Norwegian - NO (393 KB)
- Español - ES (393 KB)
- Swedish - SV (393 KB)
- Italian - IT (393 KB)
- Korean - KR (393 KB)
- Portuguese - PT (393 KB)
-
Handling Instructions (2659 KB)
Verweise
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.8382 mL | 14.1908 mL | 28.3817 mL | 70.9542 mL |
| 5 mM | 0.5676 mL | 2.8382 mL | 5.6763 mL | 14.1908 mL | |
| 10 mM | 0.2838 mL | 1.4191 mL | 2.8382 mL | 7.0954 mL | |
| 15 mM | 0.1892 mL | 0.9461 mL | 1.8921 mL | 4.7303 mL | |
| 20 mM | 0.1419 mL | 0.7095 mL | 1.4191 mL | 3.5477 mL | |
| 25 mM | 0.1135 mL | 0.5676 mL | 1.1353 mL | 2.8382 mL | |
| 30 mM | 0.0946 mL | 0.4730 mL | 0.9461 mL | 2.3651 mL | |
| 40 mM | 0.0710 mL | 0.3548 mL | 0.7095 mL | 1.7739 mL | |
| 50 mM | 0.0568 mL | 0.2838 mL | 0.5676 mL | 1.4191 mL | |
| 60 mM | 0.0473 mL | 0.2365 mL | 0.4730 mL | 1.1826 mL | |
| 80 mM | 0.0355 mL | 0.1774 mL | 0.3548 mL | 0.8869 mL | |
| 100 mM | 0.0284 mL | 0.1419 mL | 0.2838 mL | 0.7095 mL |
BM-PEG3 Related Classifications
HY-130898 Related Classifications
Powered by Bioz