Pelecopan
Based on 1 Customer Validation
Pelecopan (BCX9930) is a potent, selective, orally active inhibitor of complement factor D with an IC50 value of 14.3 nM. Pelecopan can target factor D to prevent both intravascular and extravascular hemolysis in PNH. Pelecopan also be used for other alternative pathway (AP) mediated diseases.
Nur für Forschungszwecke. Wir verkaufen nicht an Patienten.
- Reinheit: 98.07%
- CAS. Nr.: 2378380-49-3
- Formel: C23H19FN2O4
- Molecular Weight:406.41
-
Speicherung:Powder -20°C, 3 years ; In solvent -80°C, 6 months , -20°C, 1 month
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Biologische Aktivität
-
Chemical Information
-
Lösungsmittel & Löslichkeit
- Reinheit & Dokumentation
- Verweise
-
Help & FAQs
-
Immunology/Inflammation Compound Library
HY-L007
-
Clinical Compound Library
HY-L026
-
Drug Repurposing Compound Library
HY-L035
-
Orally Active Compound Library
HY-L061
-
Heterocyclic Compound Library
HY-L138
-
Autoimmune Disease Compound Library
HY-L156
-
Highly Selective Inhibitors Library
HY-L158
-
Bioactive Compound Library Max
HY-L181
-
MCE Bioactive Compound Library
HY-L001V
-
Drug Repurposing Compound Library Plus
HY-L035P
-
Clinical Compound Library Plus
HY-L026P
-
Bioactive Compound Library
HY-L001
-
High-Throughput Bioactive Compound Library
HY-L205
Biologische Aktivität
IC50: 14.3 nM (complement factor D)[1]
Pelecopan has a potent, highly specific inhibitory activity for purified human factor D with an IC50 value of 14.3 nM and also inhibits its proteolytic activity against factor B bound to C3b with an IC50 of 28.1 nM[1].
Pelecopan completely blocks hemolysis of PNH cells in vitro (with an IC50 value of 29.5 nM in rabbit erythrocytes) and suppresses the accumulation of C3 fragments on PNH erythrocytes[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
| NCT Number | Sponsor | Condition | Start Date |
Phase
|
|---|---|---|---|---|
| NCT01329991 | Plexxikon| | 2011-05 | PHASE1 |
Chemical Information
-
CAS. Nr. 2378380-49-3
-
Appearance Solid
-
Molecular Weight 406.41
-
Formel C23H19FN2O4
-
Color Off-white to light yellow
-
SMILES
O=C(CC1=C(OCC2=CC3=C(C(C4=C(F)C(CN)=NC=C4)=C2)OC=C3)C=CC=C1)O
-
Synonyms
BCX9930
-
Versand
Room temperature in continental US; may vary elsewhere.
-
Speicherung
Powder -20°C 3 years In solvent -80°C 6 months -20°C 1 month
Lösungsmittel & Löslichkeit
DMSO : 100 mg/mL (246.06 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Konzentration (Stammlösung) × Volumen (Stammlösung) = Konzentration (Ziellösung) × Volumen (Ziellösung)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (6.15 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.5 mg/mL (6.15 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Reinheit & Dokumentation
-
Data Sheet (277 KB)
-
SDS (251 KB)
- English - EN (251 KB)
- Français - FR (251 KB)
- Deutsch - DE (251 KB)
- Norwegian - NO (251 KB)
- Español - ES (251 KB)
- Swedish - SV (251 KB)
- Italian - IT (251 KB)
- Korean - KR (251 KB)
- Portuguese - PT (251 KB)
-
Handling Instructions (2659 KB)
Verweise
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.4606 mL | 12.3028 mL | 24.6057 mL | 61.5142 mL |
| 5 mM | 0.4921 mL | 2.4606 mL | 4.9211 mL | 12.3028 mL | |
| 10 mM | 0.2461 mL | 1.2303 mL | 2.4606 mL | 6.1514 mL | |
| 15 mM | 0.1640 mL | 0.8202 mL | 1.6404 mL | 4.1009 mL | |
| 20 mM | 0.1230 mL | 0.6151 mL | 1.2303 mL | 3.0757 mL | |
| 25 mM | 0.0984 mL | 0.4921 mL | 0.9842 mL | 2.4606 mL | |
| 30 mM | 0.0820 mL | 0.4101 mL | 0.8202 mL | 2.0505 mL | |
| 40 mM | 0.0615 mL | 0.3076 mL | 0.6151 mL | 1.5379 mL | |
| 50 mM | 0.0492 mL | 0.2461 mL | 0.4921 mL | 1.2303 mL | |
| 60 mM | 0.0410 mL | 0.2050 mL | 0.4101 mL | 1.0252 mL | |
| 80 mM | 0.0308 mL | 0.1538 mL | 0.3076 mL | 0.7689 mL | |
| 100 mM | 0.0246 mL | 0.1230 mL | 0.2461 mL | 0.6151 mL |
Pelecopan Related Classifications
HY-147297 Related Classifications
Powered by Bioz