1. Cell Cycle/DNA Damage Cytoskeleton
  2. Microtubule/Tubulin
  3. Avanbulin

Avanbulin  (Synonyms: BAL27862)

製品番号: HY-106008 純度: 99.08%
COA 取扱説明書 Technical Support

Avanbulin (BAL27862) is a potent, Colchicine site-binding, tubulin assembly inhibitor. Avanbulin inhibits tubulin assembly at 37 °C with an IC50 of 1.4 μM. Avanbulin binds to tubulin with an apparent Kd value of 244 nM. Avanbulin can be used for the research of cancer and cell division.

商品は「研究用試薬」です。人や動物の医療用・臨床診断用・食品用の製品ではありません。
研究用途以外に使用した場合、当社は一切の責任を負いかねます。

Avanbulin

Avanbulin 構造式

CAS 番号 : 798577-91-0

容量 価格(税別) 在庫状況 数量
>無料サンプル (0.1 - 0.2 mg)   今すぐ申し込む  
Solid + Solvent (Highly Recommended)
10 mM * 1 mL in DMSO
ready for reconstitution
USD 93 在庫あり
Solution
10 mM * 1 mL in DMSO USD 93 在庫あり
Solid
5 mg $85 在庫あり
10 mg $130 在庫あり
25 mg $220 在庫あり
50 mg $340 在庫あり
100 mg $520 在庫あり
200 mg   お問い合わせ  
500 mg   お問い合わせ  

* アイテムを追加する前、数量をご選択ください

This product is a controlled substance and not for sale in your territory.

カスタマーレビュー

Based on 0 publication(s) in Google Scholar

Other Forms of Avanbulin:

Top Publications Citing Use of Products
  • 生物活性

  • 純度とドキュメンテーション

  • 参考文献

  • カスタマーレビュー

製品説明

Avanbulin (BAL27862) is a potent, Colchicine site-binding, tubulin assembly inhibitor. Avanbulin inhibits tubulin assembly at 37 °C with an IC50 of 1.4 μM. Avanbulin binds to tubulin with an apparent Kd value of 244 nM. Avanbulin can be used for the research of cancer and cell division[1][2][3][4].

体外実験

Avanbulin (0-4 μM) binds to tubulin in the site as Colchicine with an apparent Kd value of 244 nM.[1].
Avanbulin (50 μM; 0, 10, 20, 30, 60 min) induces the proteolysis of tubulin[1].
Avanbulin (33 nM; 0, 10, 20, 30, 60 min; HeLa-tubGFP cells) collapses the mitotic spindle and forms the tiny tubulin aggregates[1].
Avanbulin does not induce the formation of tubulin oligomers[1].
Avanbulin induces growth inhibition of 23 tumor cell lines with a median relative IC50 of 13.8 nM (96 hours) [2]. Avanbulin (6 nM and 20 nM) inhibits the migration of GBM6 and GBM9 cells[3].
Avanbulin (6 nM and 20 nM; GBM6-shEB1 and GBM6-sh0 cells) triggers astrocytic differentiation of GBM6 in an EB1-dependent manner[3].
Avanbulin (12 nM; 4 h) reduces kinetochore-microtubule (KT-MT) occupancy of MG132(10 μM; 2h) treated hTert-RPE1 eGFP-α-tubulin cells[4].
Avanbulin (12 nM; 4 h) reduces average inter-KT distances of cells, shows intact spindle morphology, and lacks obvious chromosome alignment defects[4].

MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.

Cell Cytotoxicity Assay[2]

Cell Line: 23 cell lines, including RD, TC-71, SJ-GBM2, NB-1643.
Concentration: 0.1 nM-1.0 μM
Incubation Time: 96 hours
Result: Induced growth inhibition of cells with a median relative IC50 of 13.8 nM.
分子量

387.39

分子式

C20H17N7O2

CAS 番号
Appearance

Solid

Color

White to yellow

SMILES

O=C(C1=CC=C(N)C=C1)CN2C(C3=NON=C3NCCC#N)=NC4=CC=CC=C24

輸送条件

Room temperature in continental US; may vary elsewhere.

保管条件
Powder -20°C 3 years
  4°C 2 years
In solvent -80°C 6 months
  -20°C 1 month
溶剤 & 溶解度
体外: 

DMSO : 100 mg/mL (258.14 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)

Preparing
Stock Solutions
Concentration Solvent Mass 1 mg 5 mg 10 mg
1 mM 2.5814 mL 12.9069 mL 25.8138 mL
5 mM 0.5163 mL 2.5814 mL 5.1628 mL
10 mM 0.2581 mL 1.2907 mL 2.5814 mL
View the Complete Stock Solution Preparation Table

* Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.

  • Molarity Calculator

  • Dilution Calculator

Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)

Mass
=
Concentration
×
Volume
×
Molecular Weight *

Concentration (start) × Volume (start) = Concentration (final) × Volume (final)

一般には略語で表示されます:C1V1 = C2V2

濃度 (開始)

C1

×
体積 (開始)

V1

=
濃度 (終了)

C2

×
体積 (終了)

V2

体内:

Select the appropriate dissolution method based on your experimental animal and administration route.

For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for in vivo experiments, it is recommended to prepare freshly and use it on the same day.
The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.

  • Protocol 1

    Add each solvent one by one:  10% DMSO    90% Corn Oil

    Solubility: ≥ 5 mg/mL (12.91 mM); Clear solution

    This protocol yields a clear solution of ≥ 5 mg/mL (saturation unknown). If the continuous dosing period exceeds half a month, please choose this protocol carefully.

    Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (50.0 mg/mL) to 900 μL Corn oil, and mix evenly.

In Vivo Dissolution Calculator
Please enter the basic information of animal experiments:

Dosage

mg/kg

Animal weight
(per animal)

g

Dosing volume
(per animal)

μL

Number of animals

Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
%
DMSO +
+
%
Tween-80 +
%
Saline
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Calculation results:
Working solution concentration: mg/mL
Method for preparing stock solution: mg drug dissolved in μL  DMSO (Stock solution concentration: mg/mL).
The concentration of the stock solution you require exceeds the measured solubility. The following solution is for reference only. If necessary, please contact MedChemExpress (MCE).
Method for preparing in vivo working solution for animal experiments: Take μL DMSO stock solution, add μL . μL , mix evenly, next add μL Tween 80, mix evenly, then add μL Saline.
 If the continuous dosing period exceeds half a month, please choose this protocol carefully.
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
純度とドキュメンテーション

純度: 99.08%

参考文献

Complete Stock Solution Preparation Table

* Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.

Optional Solvent Concentration Solvent Mass 1 mg 5 mg 10 mg 25 mg
DMSO 1 mM 2.5814 mL 12.9069 mL 25.8138 mL 64.5344 mL
5 mM 0.5163 mL 2.5814 mL 5.1628 mL 12.9069 mL
10 mM 0.2581 mL 1.2907 mL 2.5814 mL 6.4534 mL
15 mM 0.1721 mL 0.8605 mL 1.7209 mL 4.3023 mL
20 mM 0.1291 mL 0.6453 mL 1.2907 mL 3.2267 mL
25 mM 0.1033 mL 0.5163 mL 1.0326 mL 2.5814 mL
30 mM 0.0860 mL 0.4302 mL 0.8605 mL 2.1511 mL
40 mM 0.0645 mL 0.3227 mL 0.6453 mL 1.6134 mL
50 mM 0.0516 mL 0.2581 mL 0.5163 mL 1.2907 mL
60 mM 0.0430 mL 0.2151 mL 0.4302 mL 1.0756 mL
80 mM 0.0323 mL 0.1613 mL 0.3227 mL 0.8067 mL
100 mM 0.0258 mL 0.1291 mL 0.2581 mL 0.6453 mL
  • No file chosen (Maximum size is: 1024 Kb)
  • If you have published this work, please enter the PubMed ID.
  • Your name will appear on the site.
  • Molarity Calculator

  • Dilution Calculator

The molarity calculator equation

Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)

質量   濃度   体積   分子量 *
= × ×

The dilution calculator equation

Concentration (start) × Volume (start) = Concentration (final) × Volume (final)

一般には略語で表示されます:C1V1 = C2V2

濃度 (開始) × 体積 (開始) = 濃度 (終了) × 体積 (終了)
× = ×
C1   V1   C2   V2
Help & FAQs
  • Do most proteins show cross-species activity?

    Species cross-reactivity must be investigated individually for each product. Many human cytokines will produce a nice response in mouse cell lines, and many mouse proteins will show activity on human cells. Other proteins may have a lower specific activity when used in the opposite species.

最近チェックした製品:

オンラインお問い合わせ

Your information is safe with us. * Required Fields.

製品名

 

カスタマ需要量 *

お名前 *

 

タイトル

メールアドレス *

 

電話番号 *

デパートメント

 

組纖名 *

市区町村

都道府県

国或いは地域 *

     

必ず会社名を記載ください。個人への返信は行いません。

備考

バルクお問い合わせ

Inquiry Information

製品名:
Avanbulin
製品番号:
HY-106008
数量:
MCE 日本正規代理店: