YL-109
Based on 2 publication(s) in Google Scholar
YL-109 is an antitumor agent that can induce carboxyl terminus of Hsp70-interacting protein (CHIP) expression through aryl hydrocarbon receptor (AhR) signaling. YL-109 has ability to inhibit breast cancer cell growth and invasiveness.
Nos produits utilisent uniquement pour la recherche. Nous ne vendons pas aux patients.
- Pureté: 98.91%
- CAS No.: 36341-25-0
- Formule: C14H11NO2S
- Masse moléculaire:257.31
-
Stockage:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 2 years , -20°C, 1 year
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Activité biologique
-
Chemical Information
-
Solvant et solubilité
- Pureté et documentation
- Références
-
Help & FAQs
-
Anti-Breast Cancer Compound Library
HY-L074
-
Transcription Factor-Targeted Library
HY-L090
-
Protein-protein Interaction Inhibitor Library
HY-L109
-
Heterocyclic Compound Library
HY-L138
-
Extracellular Vesicles (EVs) Compound Library
HY-L168
-
Bioactive Compound Library Max
HY-L181
-
MCE Bioactive Compound Library
HY-L001V
-
Bioactive Compound Library
HY-L001
-
High-Throughput Bioactive Compound Library
HY-L205
-
Immunology/Inflammation Compound Library
HY-L007
-
Anti-Cancer Compound Library
HY-L025
Publications Citing Use of MedChemExpress (MCE) YL-109
More
Activité biologique
YL-109 (0.001-10 μM; 96 h or 24 h) inhibits cell proliferation, motility, and invasiveness in breast cancer cells[1].
YL-109 (1 μM) increases both CHIP mRNA and protein levels in MDA-MB-231 cells[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Cell Line:MCF-7 and MDA-MB-231 cells
-
Concentration:0.001, 0.01, 0.1, 1, 10 μM
-
Incubation Time:96 hours
-
Result:Strongly inhibited cell proliferation of MCF-7 and MDA-MB-231 cells in a dose-dependent manner (IC50=85.8 nM and 4.02 μM, respectively).
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Animal Model:BALB/cAjcl-nu/nu female mice (4-5 weeks) inoculated with MCF-7 or MDA-MB-231 cells[1]
-
Dosage:15 mg/kg
-
Administration:S.c. every 2 days for 63 days
-
Result:Suppressed tumor growth in mice injected with MCF-7 and MDA-MB-231 cells.
Chemical Information
-
CAS No. 36341-25-0
-
Appearance Solid
-
Masse moléculaire 257.31
-
Formule C14H11NO2S
-
Color Off-white to light yellow
-
SMILES
OC1=CC=C(C2=NC3=CC=CC=C3S2)C=C1OC
-
Livraison
Room temperature in continental US; may vary elsewhere.
-
Stockage
Powder -20°C 3 years 4°C 2 years In solvent -80°C 2 years -20°C 1 year
Publications (2)
-
Journal Impact Factor
-
Most Recent
-
Biomed Pharmacother
YL-109 attenuates sepsis-associated multiple organ injury through inhibiting the ERK/AP-1 axis and pyroptosis by upregulating CHIP. [Abstract]2024 Jun:175:116633. PMID: 38670049 -
Solvant et solubilité
DMSO : 100 mg/mL (388.64 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 3 mg/mL (11.66 mM); Clear solution
This protocol yields a clear solution of ≥ 3 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (30.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: 3 mg/mL (11.66 mM); Clear solution; Need ultrasonic
This protocol yields a clear solution of 3 mg/mL.
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (30.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Pureté et documentation
-
Fiche technique (274 KB)
-
SDS (643 KB)
- English - EN (643 KB)
- Français - FR (643 KB)
- Deutsch - DE (643 KB)
- Norwegian - NO (643 KB)
- Español - ES (643 KB)
- Swedish - SV (643 KB)
- Italian - IT (643 KB)
- Korean - KR (643 KB)
- Portuguese - PT (643 KB)
-
Instruction de manipulation (2659 KB)
Références
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 3.8864 mL | 19.4318 mL | 38.8636 mL | 97.1591 mL |
| 5 mM | 0.7773 mL | 3.8864 mL | 7.7727 mL | 19.4318 mL | |
| 10 mM | 0.3886 mL | 1.9432 mL | 3.8864 mL | 9.7159 mL | |
| 15 mM | 0.2591 mL | 1.2955 mL | 2.5909 mL | 6.4773 mL | |
| 20 mM | 0.1943 mL | 0.9716 mL | 1.9432 mL | 4.8580 mL | |
| 25 mM | 0.1555 mL | 0.7773 mL | 1.5545 mL | 3.8864 mL | |
| 30 mM | 0.1295 mL | 0.6477 mL | 1.2955 mL | 3.2386 mL | |
| 40 mM | 0.0972 mL | 0.4858 mL | 0.9716 mL | 2.4290 mL | |
| 50 mM | 0.0777 mL | 0.3886 mL | 0.7773 mL | 1.9432 mL | |
| 60 mM | 0.0648 mL | 0.3239 mL | 0.6477 mL | 1.6193 mL | |
| 80 mM | 0.0486 mL | 0.2429 mL | 0.4858 mL | 1.2145 mL | |
| 100 mM | 0.0389 mL | 0.1943 mL | 0.3886 mL | 0.9716 mL |
YL-109 Related Classifications
HY-18619 Related Classifications
Powered by Bioz