E235
Based on 1 Customer Validation
E235 is an expression regulator of activates transcription factor 4 (ATF4). E235 reduces cell viability by activating integrated stress response (ISR) and DNA damage response signals. E235 has anti-proliferative activity and can be used for tumor research.
Nos produits utilisent uniquement pour la recherche. Nous ne vendons pas aux patients.
- Pureté: 99.86%
- CAS No.: 891894-69-2
- Formule: C28H25FN4OS
- Masse moléculaire:484.59
-
Stockage:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 6 months , -20°C, 1 month
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Activité biologique
-
Chemical Information
-
Solvant et solubilité
- Pureté et documentation
- Références
-
Help & FAQs
-
Endoplasmic Reticulum Stress Compound Library
HY-L054
-
Osteogenesis Compound Library
HY-L131
-
Bioactive Compound Library Max
HY-L181
-
MCE Bioactive Compound Library
HY-L001V
-
Bioactive Compound Library
HY-L001
-
High-Throughput Bioactive Compound Library
HY-L205
-
Cell Cycle/DNA Damage Compound Library
HY-L004
-
Anti-Cancer Compound Library
HY-L025
-
Anti-Aging Compound Library
HY-L034
Activité biologique
Activates transcription factor 4, ATF4[1]
E235 (1 µM; 2, 4, 8, 16 or 24 h) down-regulates the level of XBP-1s mRNA in HT1080 cells with time dependent manner[1].
E235 (0.1-10 µM; 4 d or 5 d) has anti-proliferative activity on HT1080, RPMI-8226, B16F10, 4T1, HT1080 shNT and HT1080 shATF4 cells[1].
E235 (0, 1, 5 and 10 µM; 4 h) increases the expression of p53 with dose-dependent manner in AG1522 cells[1].
E235 (1 µM; 2 h) increases the expression of p-Chk2 in AG1522 cells[1].
E235 (0, 1, 5 and 10 µM; 2 h) increases the expression of p-p53 in AG1522 and HT1080 cells[1].
E235 (0, 0.5, 1, 5 and 10 µM; 0.5 h) increases the expression of γ-H2AX with dose-dependent manner in HT1080 cells[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Cell Line:HT1080, B16F10 and AG1522 cells.
-
Concentration:0, 1, 5 and 10 µM.
-
Incubation Time:4 h.
-
Result:Increased the expression of ATF4 with dose-dependent manner.
-
Cell Line:HT1080 cells.
-
Concentration:0, 0.5, 1, 5 or 10 µM.
-
Incubation Time:2, 4 or 8 h.
-
Result:Increased the expression of p-elF2α with time and dose dependent manner.
-
Cell Line:HT1080 or RPMI-8226 cells.
-
Concentration:1 µM.
-
Incubation Time:0, 8, 16 and 24 h.
-
Result:Exhibited anti-proliferative activity.
-
Cell Line:AG1522 cells.
-
Concentration:0, 0.1, 0.5, 1 and 10 µM.
-
Incubation Time:4 d.
-
Result:Inhibited cell viability with dose-dependent manner.
-
Cell Line:HT1080 cells and B16F10 cells.
-
Concentration:1 µM.
-
Incubation Time:8, 16 and 24 h.
-
Result:Caused cell arrest during G2/M phase.
Chemical Information
-
CAS No. 891894-69-2
-
Appearance Solid
-
Masse moléculaire 484.59
-
Formule C28H25FN4OS
-
Color White to off-white
-
SMILES
O=C(C1=CC=C2N3C(SC2=C1)=NC(C4=CC=C(F)C=C4)=C3)NC5CCN(CC6=CC=CC=C6)CC5
-
Livraison
Room temperature in continental US; may vary elsewhere.
-
Stockage
Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
Solvant et solubilité
DMSO : 10 mg/mL (20.64 mM; ultrasonic and warming and heat to 60°C; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
H2O : < 0.1 mg/mL (insoluble)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Pureté et documentation
-
Fiche technique (275 KB)
-
SDS (251 KB)
- English - EN (251 KB)
- Français - FR (251 KB)
- Deutsch - DE (251 KB)
- Norwegian - NO (251 KB)
- Español - ES (251 KB)
- Swedish - SV (251 KB)
- Italian - IT (251 KB)
- Korean - KR (251 KB)
- Portuguese - PT (251 KB)
-
Instruction de manipulation (2659 KB)
Références
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.0636 mL | 10.3180 mL | 20.6360 mL | 51.5900 mL |
| 5 mM | 0.4127 mL | 2.0636 mL | 4.1272 mL | 10.3180 mL | |
| 10 mM | 0.2064 mL | 1.0318 mL | 2.0636 mL | 5.1590 mL | |
| 15 mM | 0.1376 mL | 0.6879 mL | 1.3757 mL | 3.4393 mL | |
| 20 mM | 0.1032 mL | 0.5159 mL | 1.0318 mL | 2.5795 mL |
E235 Related Classifications
HY-153339 Related Classifications
Powered by Bioz