POBN
Based on 1 Customer Validation
POBN (4-POBN) is a cell permeable, hydrophilic spin trap that can be used to detect free radical adducts.
Nos produits utilisent uniquement pour la recherche. Nous ne vendons pas aux patients.
- Pureté: 99.94%
- CAS No.: 66893-81-0
- Formule: C10H14N2O2
- Masse moléculaire:194.23
-
Stockage:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 6 months , -20°C, 1 month
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Activité biologique
-
Chemical Information
-
Solvant et solubilité
- Pureté et documentation
- Références
-
Help & FAQs
Activité biologique
When POBN (20 mM) and Sodium formate (100 mM) are mixed in the collecting tube with bile in the presence of 2,2′-dipyridyl (DP) (5 mM) and bathocuproinedisulfonic acid disodium salt hydrate (BC) (5 mM), only a minor residual signal of POBN radical adduct is observed[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Animal Model:Fischer male rats (300-400 g)[1]
-
Dosage:1.5 g/kg (Pharmacokinetic Analysis)
-
Administration:Injected simultaneously i.p.
-
Result:A strong six-line ESR signal of the POBN radical adduct was detected in the bile of rats after acute sodium formate poisoning.
Chemical Information
-
CAS No. 66893-81-0
-
Appearance Solid
-
Masse moléculaire 194.23
-
Formule C10H14N2O2
-
Color White to off-white
-
SMILES
[O-][N+]1=CC=C(C=C1)/C=[N+](C(C)(C)C)\[O-]
-
Synonyms
4-POBN
-
Livraison
Room temperature in continental US; may vary elsewhere.
-
Stockage
Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
Solvant et solubilité
H2O : 100 mg/mL (514.85 mM; Need ultrasonic)
DMSO : 50 mg/mL (257.43 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (12.87 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.5 mg/mL (12.87 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
For the following dissolution methods, please prepare the working solution directly:
It is recommended to prepare fresh solutions and use them promptly within a short period of time.
The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: PBS
Solubility: 100 mg/mL (514.85 mM); Clear solution; Need ultrasonic
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Working solution concentration: 0.22 mg/mL
This product has good water solubility, please refer to the measured solubility data in water/PBS/Saline for details.
Pureté et documentation
-
Fiche technique (272 KB)
-
SDS (252 KB)
- English - EN (252 KB)
- Français - FR (252 KB)
- Deutsch - DE (252 KB)
- Norwegian - NO (252 KB)
- Español - ES (252 KB)
- Swedish - SV (252 KB)
- Italian - IT (252 KB)
- Korean - KR (252 KB)
- Portuguese - PT (252 KB)
-
Instruction de manipulation (2659 KB)
Références
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO / H2O | 1 mM | 5.1485 mL | 25.7427 mL | 51.4854 mL | 128.7134 mL |
| 5 mM | 1.0297 mL | 5.1485 mL | 10.2971 mL | 25.7427 mL | |
| 10 mM | 0.5149 mL | 2.5743 mL | 5.1485 mL | 12.8713 mL | |
| 15 mM | 0.3432 mL | 1.7162 mL | 3.4324 mL | 8.5809 mL | |
| 20 mM | 0.2574 mL | 1.2871 mL | 2.5743 mL | 6.4357 mL | |
| 25 mM | 0.2059 mL | 1.0297 mL | 2.0594 mL | 5.1485 mL | |
| 30 mM | 0.1716 mL | 0.8581 mL | 1.7162 mL | 4.2904 mL | |
| 40 mM | 0.1287 mL | 0.6436 mL | 1.2871 mL | 3.2178 mL | |
| 50 mM | 0.1030 mL | 0.5149 mL | 1.0297 mL | 2.5743 mL | |
| 60 mM | 0.0858 mL | 0.4290 mL | 0.8581 mL | 2.1452 mL | |
| 80 mM | 0.0644 mL | 0.3218 mL | 0.6436 mL | 1.6089 mL | |
| 100 mM | 0.0515 mL | 0.2574 mL | 0.5149 mL | 1.2871 mL |
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.
POBN Related Classifications
HY-114713 Related Classifications
Powered by Bioz