Octisalate
Based on 1 Customer Validation
Octisalate (Octyl salicylate) is an organic compound with high lipophilicity, which is used in sunscreens and cosmetics that absorbs UVB rays.
Nur für Forschungszwecke. Wir verkaufen nicht an Patienten.
- Reinheit: 98.0%
- CAS. Nr.: 118-60-5
- Formel: C15H22O3
- Molecular Weight:250.33
-
Speicherung:Pure form -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 6 months , -20°C, 1 month
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Biologische Aktivität
-
Chemical Information
-
Lösungsmittel & Löslichkeit
- Reinheit & Dokumentation
- Verweise
-
Help & FAQs
Biologische Aktivität
Octisalate (5% (w/w), 48 h) results in the average total absorption of skin permeation to 0.65% in vitro[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Chemical Information
-
CAS. Nr. 118-60-5
-
Appearance Liquid (Density: 1.014 g/cm3 )
-
Molecular Weight 250.33
-
Formel C15H22O3
-
Color Colorless to light yellow
-
SMILES
O=C(OCC(CC)CCCC)C1=CC=CC=C1O
-
Synonyms
Octyl salicylate; 2-Ethylhexyl salicylate
-
Versand
Room temperature in continental US; may vary elsewhere.
-
Speicherung
Pure form -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
Lösungsmittel & Löslichkeit
DMSO : 100 mg/mL (399.47 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Konzentration (Stammlösung) × Volumen (Stammlösung) = Konzentration (Ziellösung) × Volumen (Ziellösung)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (9.99 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.5 mg/mL (9.99 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Reinheit & Dokumentation
-
Data Sheet (270 KB)
-
SDS (458 KB)
- English - EN (458 KB)
- Français - FR (458 KB)
- Deutsch - DE (458 KB)
- Norwegian - NO (458 KB)
- Español - ES (458 KB)
- Swedish - SV (458 KB)
- Italian - IT (458 KB)
- Korean - KR (458 KB)
- Portuguese - PT (458 KB)
-
Handling Instructions (2659 KB)
Verweise
[1]. Singh M, Beck MH. Octyl salicylate: a new contact sensitivity. Contact Dermatitis. 2007 Jan;56(1):48. [Content Brief]
[2]. Walters KA, et al. Percutaneous penetration of octyl salicylate from representative sunscreen formulations through human skin in vitro. Food Chem Toxicol. 1997 Dec;35(12):1219-25. [Content Brief]
[3]. Grégoire S, et al. Use of in vitro ADME methods to identify suitable analogs of homosalate and octisalate for use in a read-across safety assessment. J Appl Toxicol. 2024 Jul;44(7):1067-1083. [Content Brief]
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 3.9947 mL | 19.9736 mL | 39.9473 mL | 99.8682 mL |
| 5 mM | 0.7989 mL | 3.9947 mL | 7.9895 mL | 19.9736 mL | |
| 10 mM | 0.3995 mL | 1.9974 mL | 3.9947 mL | 9.9868 mL | |
| 15 mM | 0.2663 mL | 1.3316 mL | 2.6632 mL | 6.6579 mL | |
| 20 mM | 0.1997 mL | 0.9987 mL | 1.9974 mL | 4.9934 mL | |
| 25 mM | 0.1598 mL | 0.7989 mL | 1.5979 mL | 3.9947 mL | |
| 30 mM | 0.1332 mL | 0.6658 mL | 1.3316 mL | 3.3289 mL | |
| 40 mM | 0.0999 mL | 0.4993 mL | 0.9987 mL | 2.4967 mL | |
| 50 mM | 0.0799 mL | 0.3995 mL | 0.7989 mL | 1.9974 mL | |
| 60 mM | 0.0666 mL | 0.3329 mL | 0.6658 mL | 1.6645 mL | |
| 80 mM | 0.0499 mL | 0.2497 mL | 0.4993 mL | 1.2484 mL | |
| 100 mM | 0.0399 mL | 0.1997 mL | 0.3995 mL | 0.9987 mL |
Octisalate Related Classifications
HY-B0929 Related Classifications
Powered by Bioz