LIN28-IN-2
Based on 1 Customer Validation
LIN28-IN-2 is a Lin28 inhibitor with activity against Lin28a, Lin28b, and their zinc knuckle domain. LIN28-IN-2 blocks Lin28-RNA substrate binding, perturbs zinc knuckle domain conformation. LIN28-IN-2 inhibits cancer cell proliferation, spheroid growth, and induces G2/M phase arrest. LIN28-IN-2 suppresses cancer stem cell phenotypes, Lin28-mediated stress granule formation, let-7 target genes, cancer stem cell biomarkers, and neuroendocrine biomarkers expression in cancer cells. LIN28-IN-2 can be used for the research of cancer.
Nur für Forschungszwecke. Wir verkaufen nicht an Patienten.
- Reinheit: 99.51%
- Formel: C9H7FN2O2S
- Molecular Weight:226.23
-
Speicherung:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 6 months , -20°C, 1 month
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Biologische Aktivität
-
Chemical Information
-
Lösungsmittel & Löslichkeit
- Reinheit & Dokumentation
- Verweise
-
Help & FAQs
Biologische Aktivität
|
Lin28 |
LIN28-IN-2 (Compound Ln268) (0-500 μM) dose-dependently inhibits the interaction between purified Lin28b ZKD protein and pre-let-7d RNA in an EMSA biochemical assay[1].
LIN28-IN-2 (20 μM; 72 h) suppresses Lin28b activity in DuNE cells by increasing let-7d levels, reducing Lin28b expression, and downregulating downstream let-7 targets, CSC biomarkers, and NE biomarkers[1].
LIN28-IN-2 potently inhibits proliferation of Lin28b-positive DuNE cells and Lin28a-positive IGROV-1 cells, with stronger activity than parent compound Ln15[1].
LIN28-IN-2 (0-100 μM; 0-6 days) inhibits 3D spheroid growth of Lin28b-positive DuNE cells with an IC50 of 10 μM[1].
LIN28-IN-2 (14 days) strongly inhibits colony formation of Lin28b-positive DuNE cells, reducing colony counts by 96% after 14 days of treatment[1].
LIN28-IN-2 (0-20 μM; 144 h) induces dose-dependent G2/M phase cell cycle arrest in Lin28b-positive DuNE cells[1].
LIN28-IN-2 selectively inhibits proliferation of Lin28-positive cancer cell lines (including DuNE, IGROV-1, TOV-112D, Kuramochi, AN3CA, and VOA1066) and has no effect on Lin28-negative cell lines[1].
LIN28-IN-2 inhibits Lin28b-mediated stress granule formation in DuNE cells by reducing Lin28b SG localization and blocking SG maturation[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Cell Line:Lin28b-positive DuNE prostate cancer cells
-
Concentration:0, 1, 10, 20 μM
-
Incubation Time:144 h
-
Result:Induced dose-dependent cell cycle arrest in the G2/M phase.
Increased sub-population percentages in G2/M and decreased percentages in G1 and S phases at higher concentrations.
Chemical Information
-
Appearance Solid
-
Molecular Weight 226.23
-
Formel C9H7FN2O2S
-
Color White to light yellow
-
SMILES
FC1=CC=C(NC(N2)=CSC2=O)C(O)=C1
-
Versand
Room temperature in continental US; may vary elsewhere.
-
Speicherung
Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
Lösungsmittel & Löslichkeit
DMSO : 100 mg/mL (442.03 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Konzentration (Stammlösung) × Volumen (Stammlösung) = Konzentration (Ziellösung) × Volumen (Ziellösung)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 5 mg/mL (22.10 mM); Clear solution
This protocol yields a clear solution of ≥ 5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (50.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 5 mg/mL (22.10 mM); Clear solution
This protocol yields a clear solution of ≥ 5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (50.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Reinheit & Dokumentation
-
Data Sheet (274 KB)
-
SDS (252 KB)
- English - EN (252 KB)
- Français - FR (252 KB)
- Deutsch - DE (252 KB)
- Norwegian - NO (252 KB)
- Español - ES (252 KB)
- Swedish - SV (252 KB)
- Italian - IT (252 KB)
- Korean - KR (252 KB)
- Portuguese - PT (252 KB)
-
Handling Instructions (2659 KB)
Verweise
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 4.4203 mL | 22.1014 mL | 44.2028 mL | 110.5070 mL |
| 5 mM | 0.8841 mL | 4.4203 mL | 8.8406 mL | 22.1014 mL | |
| 10 mM | 0.4420 mL | 2.2101 mL | 4.4203 mL | 11.0507 mL | |
| 15 mM | 0.2947 mL | 1.4734 mL | 2.9469 mL | 7.3671 mL | |
| 20 mM | 0.2210 mL | 1.1051 mL | 2.2101 mL | 5.5254 mL | |
| 25 mM | 0.1768 mL | 0.8841 mL | 1.7681 mL | 4.4203 mL | |
| 30 mM | 0.1473 mL | 0.7367 mL | 1.4734 mL | 3.6836 mL | |
| 40 mM | 0.1105 mL | 0.5525 mL | 1.1051 mL | 2.7627 mL | |
| 50 mM | 0.0884 mL | 0.4420 mL | 0.8841 mL | 2.2101 mL | |
| 60 mM | 0.0737 mL | 0.3684 mL | 0.7367 mL | 1.8418 mL | |
| 80 mM | 0.0553 mL | 0.2763 mL | 0.5525 mL | 1.3813 mL | |
| 100 mM | 0.0442 mL | 0.2210 mL | 0.4420 mL | 1.1051 mL |
LIN28-IN-2 Related Classifications
HY-168437 Related Classifications
Powered by Bioz