TT-OAD2
Based on 1 Customer Validation
TT-OAD2 is a non-peptide glucagon-like peptide-1 (GLP-1) receptor agonist with an EC50 of 5 nM. TT-OAD2 has the potential for diabetes treatment.
Nur für Forschungszwecke. Wir verkaufen nicht an Patienten.
- Reinheit: 99.59%
- CAS. Nr.: 2382719-60-8
- Formel: C50H49Cl4N3O6
- Molecular Weight:929.75
-
Speicherung:
4°C, sealed storage, away from moisture and light
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light)
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Biologische Aktivität
-
Chemical Information
-
Lösungsmittel & Löslichkeit
- Reinheit & Dokumentation
- Verweise
-
Help & FAQs
Biologische Aktivität
EC50: 5 nM (GLP-1 receptor)[2]
TT-OAD2 (0-10 μM) inhibits GLP-1- and oxyntomodulin-mediated cAMP, calcium, pERK1/2 and β-arrestin responses in a concentration-dependent manner in HEK293A cells[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Animal Model:Male human GLP-1 receptor knock-in and knockout mice (6-11 months of age) with intravenous glucose tolerance tests[1]
-
Dosage:3 mg/kg
-
Administration:Intravenous injection (Single dose)
-
Result:Induced plasma insulin.
Chemical Information
-
CAS. Nr. 2382719-60-8
-
Appearance Solid
-
Molecular Weight 929.75
-
Formel C50H49Cl4N3O6
-
Color Off-white to yellow
-
SMILES
O=C(O)[C@H](CC1=CC=C(C2=C(C)C(C)=NC=C2)C=C1)NC([C@H]3N([C@H](C4=CC=CC=C4)CC)CC5=C(C=C(OC[C@H](C6=CC=C(OCC7=CC=C(Cl)C(Cl)=C7)C=C6)O8)C8=C5)C3)=O.[H]Cl.[H]Cl
-
Versand
Room temperature in continental US; may vary elsewhere.
-
Speicherung
4°C, sealed storage, away from moisture and light
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light)
Lösungsmittel & Löslichkeit
DMSO : 110 mg/mL (118.31 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Konzentration (Stammlösung) × Volumen (Stammlösung) = Konzentration (Ziellösung) × Volumen (Ziellösung)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.75 mg/mL (2.96 mM); Clear solution
This protocol yields a clear solution of ≥ 2.75 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (27.5 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL. * In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light)
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Reinheit & Dokumentation
-
Data Sheet (273 KB)
-
SDS (252 KB)
- English - EN (252 KB)
- Français - FR (252 KB)
- Deutsch - DE (252 KB)
- Norwegian - NO (252 KB)
- Español - ES (252 KB)
- Swedish - SV (252 KB)
- Italian - IT (252 KB)
- Korean - KR (252 KB)
- Portuguese - PT (252 KB)
-
Handling Instructions (2659 KB)
Verweise
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 1.0756 mL | 5.3778 mL | 10.7556 mL | 26.8889 mL |
| 5 mM | 0.2151 mL | 1.0756 mL | 2.1511 mL | 5.3778 mL | |
| 10 mM | 0.1076 mL | 0.5378 mL | 1.0756 mL | 2.6889 mL | |
| 15 mM | 0.0717 mL | 0.3585 mL | 0.7170 mL | 1.7926 mL | |
| 20 mM | 0.0538 mL | 0.2689 mL | 0.5378 mL | 1.3444 mL | |
| 25 mM | 0.0430 mL | 0.2151 mL | 0.4302 mL | 1.0756 mL | |
| 30 mM | 0.0359 mL | 0.1793 mL | 0.3585 mL | 0.8963 mL | |
| 40 mM | 0.0269 mL | 0.1344 mL | 0.2689 mL | 0.6722 mL | |
| 50 mM | 0.0215 mL | 0.1076 mL | 0.2151 mL | 0.5378 mL | |
| 60 mM | 0.0179 mL | 0.0896 mL | 0.1793 mL | 0.4481 mL | |
| 80 mM | 0.0134 mL | 0.0672 mL | 0.1344 mL | 0.3361 mL | |
| 100 mM | 0.0108 mL | 0.0538 mL | 0.1076 mL | 0.2689 mL |
TT-OAD2 Related Classifications
HY-129658A Related Classifications
Powered by Bioz