ML213
Based on 1 Customer Validation
ML213 is a selective activator of Kv7.2 and Kv7.4 channels, enhances Kv7.2 and Kv7.4 channels with EC50s of 230 and 510 nM, respectively.
Nos produits utilisent uniquement pour la recherche. Nous ne vendons pas aux patients.
- Pureté: 99.76%
- CAS No.: 489402-47-3
- Formule: C17H23NO
- Masse moléculaire:257.37
-
Stockage:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 2 years , -20°C, 1 year
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Activité biologique
-
Chemical Information
-
Solvant et solubilité
- Pureté et documentation
- Références
-
Help & FAQs
-
Membrane Transporter/Ion Channel Compound Library
HY-L011
-
Neuroprotective Compound Library
HY-L070
-
Targeted Diversity Library
HY-L099
-
Potassium Channel Compound Library
HY-L119
-
Membrane Protein-targeted Compound Library
HY-L149
-
Membrane Receptor-targeted Compound Library
HY-L150
-
Highly Selective Activators Library
HY-L159
-
Ion Channel Compound Library
HY-L166
-
Bioactive Compound Library Max
HY-L181
-
MCE Bioactive Compound Library
HY-L001V
-
Bioactive Compound Library
HY-L001
-
High-Throughput Bioactive Compound Library
HY-L205
Activité biologique
ML213 (100 nM-30 μM) increases maximal conductance to a peak at 212% ± 27% of control, with an EC50 of 0.8 ± 0.3 μM. ML213 (10 μM) reduces the deactivation rates of Kv7.4 currents by 4.6-fold in the voltage range from 130 mV to 90 mV. ML213 is a potent and effective activator of homomeric Kv7.5 channels overexpressed in A7r5 cells. ML213 increases maximal conductance of Kv7.5 channels with an EC50 of 0.7 ± 0.2 μM. ML213 (10 μM) also reduces deactivation rates of Kv7.5 currents by 5.9-fold on average. ML213 produces similar effects on heteromeric Kv7.4/7.5 channels: 204% ± 11% maximal increase in conductance with an EC50 of 1.1 ± 0.6 μM and a 34.2 ± 3.3 mV maximal negative shift of the activation curve, with an EC50 of 3.8 ± 1.2 μM[1]. ML213 causes a vasorelaxation in different precontracted rat blood vessels. ML213 (10 μM) also hyperpolarizes mesenteric artery smooth muscle cells[2]. ML213 causes a concentration-dependent shift in the V1/2 for KCNQ2 activation with an EC50 340 ± 70 nM and a maximal shift of 37.4 mV[3].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Chemical Information
-
CAS No. 489402-47-3
-
Appearance Solid
-
Masse moléculaire 257.37
-
Formule C17H23NO
-
Color White to off-white
-
SMILES
O=C(C1C(C2)CCC2C1)NC3=C(C)C=C(C)C=C3C
-
Livraison
Room temperature in continental US; may vary elsewhere.
-
Stockage
Powder -20°C 3 years 4°C 2 years In solvent -80°C 2 years -20°C 1 year
Solvant et solubilité
DMSO : 36.67 mg/mL (142.48 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.75 mg/mL (10.69 mM); Clear solution
This protocol yields a clear solution of ≥ 2.75 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (27.5 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.75 mg/mL (10.69 mM); Clear solution
This protocol yields a clear solution of ≥ 2.75 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (27.5 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Pureté et documentation
-
Fiche technique (275 KB)
-
SDS (393 KB)
- English - EN (393 KB)
- Français - FR (393 KB)
- Deutsch - DE (393 KB)
- Norwegian - NO (393 KB)
- Español - ES (393 KB)
- Swedish - SV (393 KB)
- Italian - IT (393 KB)
- Korean - KR (393 KB)
- Portuguese - PT (393 KB)
-
Instruction de manipulation (2659 KB)
Références
[1]. Brueggemann LI, et al. Differential activation of vascular smooth muscle Kv7.4, Kv7.5, and Kv7.4/7.5 channels by ML213 and ICA-069673. Mol Pharmacol. 2014 Sep;86(3):330-41. [Content Brief]
[2]. Jepps TA, et al. Vasorelaxant effects of novel Kv 7.4 channel enhancers ML213 and NS15370. Br J Pharmacol. 2014 Oct;171(19):4413-24. [Content Brief]
[3]. Yu H, et al. Discovery, Synthesis, and Structure Activity Relationship of a Series of N-Aryl- bicyclo[2.2.1]heptane-2-carboxamides: Characterization of ML213 as a Novel KCNQ2 and KCNQ4 Potassium Channel Opener. ACS Chem Neurosci. 2011 Oct 19;2(10):572-577. [Content Brief]
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 3.8855 mL | 19.4273 mL | 38.8546 mL | 97.1364 mL |
| 5 mM | 0.7771 mL | 3.8855 mL | 7.7709 mL | 19.4273 mL | |
| 10 mM | 0.3885 mL | 1.9427 mL | 3.8855 mL | 9.7136 mL | |
| 15 mM | 0.2590 mL | 1.2952 mL | 2.5903 mL | 6.4758 mL | |
| 20 mM | 0.1943 mL | 0.9714 mL | 1.9427 mL | 4.8568 mL | |
| 25 mM | 0.1554 mL | 0.7771 mL | 1.5542 mL | 3.8855 mL | |
| 30 mM | 0.1295 mL | 0.6476 mL | 1.2952 mL | 3.2379 mL | |
| 40 mM | 0.0971 mL | 0.4857 mL | 0.9714 mL | 2.4284 mL | |
| 50 mM | 0.0777 mL | 0.3885 mL | 0.7771 mL | 1.9427 mL | |
| 60 mM | 0.0648 mL | 0.3238 mL | 0.6476 mL | 1.6189 mL | |
| 80 mM | 0.0486 mL | 0.2428 mL | 0.4857 mL | 1.2142 mL | |
| 100 mM | 0.0389 mL | 0.1943 mL | 0.3885 mL | 0.9714 mL |
ML213 Related Classifications
HY-101843 Related Classifications
Powered by Bioz