Diallate
Based on 1 Customer Validation
Diallate is thiocarbamate herbicide. Diallate can produce mutagenic responses in the mouse lymphoma assay in the presence of metabolic activation.
Nos produits utilisent uniquement pour la recherche. Nous ne vendons pas aux patients.
- Pureté: 96.69%
- CAS No.: 2303-16-4
- Formule: C10H17Cl2NOS
- Masse moléculaire:270.22
-
Stockage:Pure form -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 6 months , -20°C, 1 month
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Activité biologique
-
Chemical Information
-
Solvant et solubilité
- Pureté et documentation
- Références
-
Help & FAQs
Activité biologique
Chemical Information
-
CAS No. 2303-16-4
-
Appearance Liquid
-
Masse moléculaire 270.22
-
Formule C10H17Cl2NOS
-
Color Colorless to light yellow
-
SMILES
O=C(N(C(C)C)C(C)C)SC/C(Cl)=C/Cl
-
Livraison
Room temperature in continental US; may vary elsewhere.
-
Stockage
Pure form -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
Solvant et solubilité
DMSO : ≥ 100 mg/mL (370.07 mM; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
* "≥" means soluble, but saturation unknown.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (9.25 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.5 mg/mL (9.25 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Pureté et documentation
-
Fiche technique (269 KB)
-
SDS (728 KB)
- English - EN (728 KB)
- Français - FR (728 KB)
- Deutsch - DE (728 KB)
- Norwegian - NO (728 KB)
- Español - ES (728 KB)
- Swedish - SV (728 KB)
- Italian - IT (728 KB)
- Korean - KR (728 KB)
- Portuguese - PT (728 KB)
-
Instruction de manipulation (2659 KB)
Références
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 3.7007 mL | 18.5034 mL | 37.0069 mL | 92.5172 mL |
| 5 mM | 0.7401 mL | 3.7007 mL | 7.4014 mL | 18.5034 mL | |
| 10 mM | 0.3701 mL | 1.8503 mL | 3.7007 mL | 9.2517 mL | |
| 15 mM | 0.2467 mL | 1.2336 mL | 2.4671 mL | 6.1678 mL | |
| 20 mM | 0.1850 mL | 0.9252 mL | 1.8503 mL | 4.6259 mL | |
| 25 mM | 0.1480 mL | 0.7401 mL | 1.4803 mL | 3.7007 mL | |
| 30 mM | 0.1234 mL | 0.6168 mL | 1.2336 mL | 3.0839 mL | |
| 40 mM | 0.0925 mL | 0.4626 mL | 0.9252 mL | 2.3129 mL | |
| 50 mM | 0.0740 mL | 0.3701 mL | 0.7401 mL | 1.8503 mL | |
| 60 mM | 0.0617 mL | 0.3084 mL | 0.6168 mL | 1.5420 mL | |
| 80 mM | 0.0463 mL | 0.2313 mL | 0.4626 mL | 1.1565 mL | |
| 100 mM | 0.0370 mL | 0.1850 mL | 0.3701 mL | 0.9252 mL |
Diallate Related Classifications
HY-W774905 Related Classifications
Powered by Bioz