Frunexian
Based on 1 Customer Validation
Frunexian (EP-7041) is a potent and selective FXIa inhibitor. Frunexian produces anticoagulant effects and rapidly restores normal coagulation function. Frunexian can be used in thrombosis research.
Nos produits utilisent uniquement pour la recherche. Nous ne vendons pas aux patients.
- Pureté : 97.01%
- CAS No.: 1803270-60-1
- Formule: C19H26N4O4
- Masse moléculaire:374.43
-
Stockage:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 6 months , -20°C, 1 month
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Activité biologique
-
Chemical Information
-
Solvant et solubilité
- Pureté et documentation
- Références
-
Help & FAQs
-
HY-137431
AsundexianFXIa Inhibitor -
HY-125856
MilvexianFactor Xia Antagonists -
HY-P2008
Boc-Ile-Glu-Gly-Arg-AMCFluorescent Peptide -
HY-50903
RivaroxabanFactor Xa Inhibitor -
HY-50667
ApixabanSelective Factor Xa Inhibitor -
HY-10264
EdoxabanFXa Inhibitor -
HY-B0597
Fondaparinux sodiumFactor Xa Inhibitor -
HY-50903R
Rivaroxaban (Standard)Factor Xa Inhibitor -
HY-P99415
AbelacimabAnti-FXI Antibody -
HY-10268
BetrixabanFactor Xa Inhibitor -
HY-50667R
Apixaban (Standard)Selective Factor Xa Inhibitor -
HY-70035
OtamixabanFactor Xa Inhibitor
Activité biologique
Description
In Vitro
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
In Vivo
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Essai clinique
| NCT Number | Sponsor | Condition | Start Date |
Phase
|
|---|---|---|---|---|
| NCT01329991 | 2011-05 | PHASE1 |
Chemical Information
-
CAS No. 1803270-60-1
-
Appearance Solid
-
Masse moléculaire 374.43
-
Formule C19H26N4O4
-
Color White to off-white
-
SMILES
OC([C@@H](N(C1=O)C(N[C@@H](C2CCCCC2)C)=O)[C@H]1CC3=CC=NC(N)=C3)=O
-
Synonyms
EP-7041
-
Livraison
Room temperature in continental US; may vary elsewhere.
-
Stockage
Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
Solvant et solubilité
In Vitro:
DMSO : 100 mg/mL (267.07 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
In Vivo:
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (6.68 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.5 mg/mL (6.68 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
In Vivo Dissolution Calculator
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Pureté et documentation
-
Fiche technique (281 KB)
-
SDS (396 KB)
- English - EN (396 KB)
- Français - FR (396 KB)
- Deutsch - DE (396 KB)
- Norwegian - NO (396 KB)
- Español - ES (396 KB)
- Swedish - SV (396 KB)
- Italian - IT (396 KB)
- Korean - KR (396 KB)
- Portuguese - PT (396 KB)
-
Instruction de manipulation (2659 KB)
Références
[2]. Prakash S, et al. Factor XI/XIa inhibitors for the prevention and treatment of venous and arterial thromboembolism: A narrative review. Vascular medicine (London, England). 2024 Feb;29(1):85-92. [Content Brief]
[4]. Zhang JY, et al. Pharmacokinetics, pharmacodynamics, and safety of frunexian in healthy Chinese volunteer adults: A randomized dose-escalation phase I study. Clinical and translational science. 2024 Apr;17(4):e13787. [Content Brief]
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.6707 mL | 13.3536 mL | 26.7073 mL | 66.7682 mL |
| 5 mM | 0.5341 mL | 2.6707 mL | 5.3415 mL | 13.3536 mL | |
| 10 mM | 0.2671 mL | 1.3354 mL | 2.6707 mL | 6.6768 mL | |
| 15 mM | 0.1780 mL | 0.8902 mL | 1.7805 mL | 4.4512 mL | |
| 20 mM | 0.1335 mL | 0.6677 mL | 1.3354 mL | 3.3384 mL | |
| 25 mM | 0.1068 mL | 0.5341 mL | 1.0683 mL | 2.6707 mL | |
| 30 mM | 0.0890 mL | 0.4451 mL | 0.8902 mL | 2.2256 mL | |
| 40 mM | 0.0668 mL | 0.3338 mL | 0.6677 mL | 1.6692 mL | |
| 50 mM | 0.0534 mL | 0.2671 mL | 0.5341 mL | 1.3354 mL | |
| 60 mM | 0.0445 mL | 0.2226 mL | 0.4451 mL | 1.1128 mL | |
| 80 mM | 0.0334 mL | 0.1669 mL | 0.3338 mL | 0.8346 mL | |
| 100 mM | 0.0267 mL | 0.1335 mL | 0.2671 mL | 0.6677 mL |
Frunexian Related Classifications
HY-156613 Related Classifications
Powered by Bioz