Ocedurenone
Based on 1 Customer Validation
Ocedurenone is a corticosteroid receptor antagonist. Ocedurenone can be used for the research of kidney disease (WO2018054357, compound I).
Nos produits utilisent uniquement pour la recherche. Nous ne vendons pas aux patients.
- Pureté: 99.42%
- CAS No.: 1359969-24-6
- Formule: C28H30ClN5O2
- Masse moléculaire:504.02
-
Stockage:
4°C, sealed storage, away from moisture and light
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light)
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Activité biologique
-
Chemical Information
-
Solvant et solubilité
- Pureté et documentation
- Références
-
Help & FAQs
-
HY-111372
Finerenone
-
HY-132809
Baxdrostat
-
HY-16276
Osilodrostat
-
HY-147277
Lorundrostat
-
HY-113151
18-Oxocortisol
-
HY-16276A
Osilodrostat phosphate
-
HY-16276R
Osilodrostat (Standard)
-
HY-100471
Esaxerenone
-
HY-B1438
Canrenone
-
HY-B1438R
Canrenone (Standard)
-
HY-132809A
(S)-Baxdrostat
-
HY-B1582A
Canrenoate potassium
Activité biologique
Corticosteroid Receptor[1]
Ocedurenone is a corticosteroid receptor antagonist[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
| NCT Number | Sponsor | Condition | Start Date |
Phase
|
|---|---|---|---|---|
| NCT01329991 | Plexxikon| | 2011-05 | PHASE1 |
Chemical Information
-
CAS No. 1359969-24-6
-
Appearance Solid
-
Masse moléculaire 504.02
-
Formule C28H30ClN5O2
-
Color Light yellow to yellow
-
SMILES
ClC1=C(C#N)C=CC(N2[C@](C3CCCC3)([H])[C@]4([H])C(C5=CC=C(C(N6CCC(CC6)O)=O)N=C5CC4)=N2)=C1
-
Synonyms
KBP-5074
-
Livraison
Room temperature in continental US; may vary elsewhere.
-
Stockage
4°C, sealed storage, away from moisture and light
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light)
Solvant et solubilité
DMSO : ≥ 100 mg/mL (198.40 mM; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
* "≥" means soluble, but saturation unknown.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (4.96 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: 2.5 mg/mL (4.96 mM); Suspended solution; Need ultrasonic
This protocol yields a suspended solution of 2.5 mg/mL. Suspended solution can be used for oral and intraperitoneal injection.
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL. * In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light)
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Pureté et documentation
-
Fiche technique (271 KB)
-
SDS (252 KB)
- English - EN (252 KB)
- Français - FR (252 KB)
- Deutsch - DE (252 KB)
- Norwegian - NO (252 KB)
- Español - ES (252 KB)
- Swedish - SV (252 KB)
- Italian - IT (252 KB)
- Korean - KR (252 KB)
- Portuguese - PT (252 KB)
-
Instruction de manipulation (2659 KB)
Références
[1]. WO2018054357
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 1.9840 mL | 9.9202 mL | 19.8405 mL | 49.6012 mL |
| 5 mM | 0.3968 mL | 1.9840 mL | 3.9681 mL | 9.9202 mL | |
| 10 mM | 0.1984 mL | 0.9920 mL | 1.9840 mL | 4.9601 mL | |
| 15 mM | 0.1323 mL | 0.6613 mL | 1.3227 mL | 3.3067 mL | |
| 20 mM | 0.0992 mL | 0.4960 mL | 0.9920 mL | 2.4801 mL | |
| 25 mM | 0.0794 mL | 0.3968 mL | 0.7936 mL | 1.9840 mL | |
| 30 mM | 0.0661 mL | 0.3307 mL | 0.6613 mL | 1.6534 mL | |
| 40 mM | 0.0496 mL | 0.2480 mL | 0.4960 mL | 1.2400 mL | |
| 50 mM | 0.0397 mL | 0.1984 mL | 0.3968 mL | 0.9920 mL | |
| 60 mM | 0.0331 mL | 0.1653 mL | 0.3307 mL | 0.8267 mL | |
| 80 mM | 0.0248 mL | 0.1240 mL | 0.2480 mL | 0.6200 mL | |
| 100 mM | 0.0198 mL | 0.0992 mL | 0.1984 mL | 0.4960 mL |
Ocedurenone Related Classifications
HY-132827 Related Classifications
Powered by Bioz