Galantide TFA
Based on 1 Customer Validation
Galantide TFA is a reversible and non-specific galanin (GAL) receptor antagonist. Galantide TFA dose-dependently shows antagonism to galanin-induced K+ conductance with an IC50 value of 4 nM. Galantide TFA can be used for the research of neurological disease and hormone metabolism research.
Nur für Forschungszwecke. Wir verkaufen nicht an Patienten.
- Reinheit: 98.77%
- Formel: C106H152F3N25O28S
- Molecular Weight:2313.55
-
Speicherung:
Sealed storage, away from moisture and light, under nitrogen.
Powder -80°C, 2 years , -20°C, 1 year* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light, under nitrogen)
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Biologische Aktivität
-
Chemical Information
-
Lösungsmittel & Löslichkeit
- Reinheit & Dokumentation
- Verweise
-
Help & FAQs
Alle Neuropeptide Y Receptor Isoform-spezifische Produkte anzeigen
More
Biologische Aktivität
Galantide TFA (0.1-10000 nM) inhibits the galanin-induced activation of the K+ conductance with an IC50 value of 4 nM[1]. Galantide TFA (0.1-10000 nM) dose-dependently inhibits the voltage-dependent Ba2+ current with an IC50 value of 16 nM[1]. Galantide TFA (0.1-10000 nM) shows a maximum inhibition of approximately 40% to voltage-dependent Ba2+ current[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Animal Model:Adult female Crl:CD(SD)BR ovarian steroid-primed ovariectomized (OVX) rats[2]
-
Dosage:5 nm
-
Administration:Intracerebroventricularly (icv) injection; 5 nm, 60 min before GAL
-
Result:Blocked GAL-induced LH release.
Chemical Information
-
Appearance Solid
-
Molecular Weight 2313.55
-
Formel C106H152F3N25O28S
-
Color White to off-white
-
Sequence
Gly-Trp-Thr-Leu-Asn-Ser-Ala-Gly-Tyr-Leu-Leu-Gly-Pro-Gln-Gln-Phe-Phe-Gly-Leu-Met-NH2
-
Sequence Shortening
GWTLNSAGYLLGPQQFFGLM-NH2
-
Versand
Room temperature in continental US; may vary elsewhere.
-
Speicherung
Sealed storage, away from moisture and light, under nitrogen
Powder -80°C 2 years -20°C 1 year * In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light, under nitrogen)
Lösungsmittel & Löslichkeit
DMSO : 100 mg/mL (43.22 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
H2O : < 0.1 mg/mL (insoluble)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light, under nitrogen). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light, under nitrogen). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Konzentration (Stammlösung) × Volumen (Stammlösung) = Konzentration (Ziellösung) × Volumen (Ziellösung)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (1.08 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL. * In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light, under nitrogen)
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Reinheit & Dokumentation
-
Data Sheet (270 KB)
-
SDS (252 KB)
- English - EN (252 KB)
- Français - FR (252 KB)
- Deutsch - DE (252 KB)
- Norwegian - NO (252 KB)
- Español - ES (252 KB)
- Swedish - SV (252 KB)
- Italian - IT (252 KB)
- Korean - KR (252 KB)
- Portuguese - PT (252 KB)
-
Handling Instructions (2659 KB)
Verweise
[1]. Mulvaney JM, et al. Galantide distinguishes putative subtypes of galanin receptors in mudpuppy parasympathetic neurons. Eur J Pharmacol. 1995 Dec 4;287(1):97-100. [Content Brief]
[2]. Sahu A, et al. Role of galanin in stimulation of pituitary luteinizing hormone secretion as revealed by a specific receptor antagonist, galantide. Endocrinology. 1994 Feb;134(2):529-36. [Content Brief]
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light, under nitrogen). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 0.4322 mL | 2.1612 mL | 4.3224 mL | 10.8059 mL |
| 5 mM | 0.0864 mL | 0.4322 mL | 0.8645 mL | 2.1612 mL | |
| 10 mM | 0.0432 mL | 0.2161 mL | 0.4322 mL | 1.0806 mL | |
| 15 mM | 0.0288 mL | 0.1441 mL | 0.2882 mL | 0.7204 mL | |
| 20 mM | 0.0216 mL | 0.1081 mL | 0.2161 mL | 0.5403 mL | |
| 25 mM | 0.0173 mL | 0.0864 mL | 0.1729 mL | 0.4322 mL | |
| 30 mM | 0.0144 mL | 0.0720 mL | 0.1441 mL | 0.3602 mL | |
| 40 mM | 0.0108 mL | 0.0540 mL | 0.1081 mL | 0.2701 mL |
Galantide TFA Related Classifications
HY-P0262A Related Classifications
Powered by Bioz