iGePhos1
Based on 1 Customer Validation
iGePhos1 is an inactive GePhos1 (HY-161408) epimer used as a nonbinding negative control. iGephos1 lacks the phosphatase recruiting possibility.
For research use only. We do not sell to patients.
- Purity: 98.54%
- Formula: C63H75ClFN7O13
- Molecular Weight:1192.76
-
Storage:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 6 months , -20°C, 1 month
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Biological Activity
-
Chemical Information
-
Solvent & Solubility
- Purity & Documentation
- References
-
Help & FAQs
Biological Activity
Chemical Information
-
Appearance Solid
-
Molecular Weight 1192.76
-
Formula C63H75ClFN7O13
-
Color White to off-white
-
SMILES
COC1=CC([C@@H](C(N2[C@@H](C(O[C@@H](C3=CC(OCC(NCCC(N4CCN(CCCOC5=CC6=C(N=CN=C6C=C5OC)NC7=CC=C(C(Cl)=C7)F)CC4)=O)=O)=CC=C3)CCC8=CC(OC)=C(C=C8)OC)=O)CCCC2)=O)CC)=CC(OC)=C1OC
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
Solvent & Solubility
DMSO : 100 mg/mL (83.84 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (2.10 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Purity & Documentation
-
Data Sheet (269 KB)
-
SDS (251 KB)
- English - EN (251 KB)
- Français - FR (251 KB)
- Deutsch - DE (251 KB)
- Norwegian - NO (251 KB)
- Español - ES (251 KB)
- Swedish - SV (251 KB)
- Italian - IT (251 KB)
- Korean - KR (251 KB)
- Portuguese - PT (251 KB)
-
Handling Instructions (2659 KB)
References
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 0.8384 mL | 4.1920 mL | 8.3839 mL | 20.9598 mL |
| 5 mM | 0.1677 mL | 0.8384 mL | 1.6768 mL | 4.1920 mL | |
| 10 mM | 0.0838 mL | 0.4192 mL | 0.8384 mL | 2.0960 mL | |
| 15 mM | 0.0559 mL | 0.2795 mL | 0.5589 mL | 1.3973 mL | |
| 20 mM | 0.0419 mL | 0.2096 mL | 0.4192 mL | 1.0480 mL | |
| 25 mM | 0.0335 mL | 0.1677 mL | 0.3354 mL | 0.8384 mL | |
| 30 mM | 0.0279 mL | 0.1397 mL | 0.2795 mL | 0.6987 mL | |
| 40 mM | 0.0210 mL | 0.1048 mL | 0.2096 mL | 0.5240 mL | |
| 50 mM | 0.0168 mL | 0.0838 mL | 0.1677 mL | 0.4192 mL | |
| 60 mM | 0.0140 mL | 0.0699 mL | 0.1397 mL | 0.3493 mL | |
| 80 mM | 0.0105 mL | 0.0524 mL | 0.1048 mL | 0.2620 mL |
iGePhos1 Related Classifications
HY-161408A Related Classifications
Powered by Bioz