DDR Inhibitor
Based on 1 Customer Validation
DDR Inhibitor is a potent discoidin domain receptor (DDR) inhibitor, with an IC50 of 3.3 nM for DDR2, and shows 53% inhibition on DDR1 at 1.5 nM.
Nos produits utilisent uniquement pour la recherche. Nous ne vendons pas aux patients.
- Pureté: 99.02%
- CAS No.: 1644069-80-6
- Formule: C23H20FN5O2
- Masse moléculaire:417.44
-
Stockage:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 2 years , -20°C, 1 year
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Activité biologique
-
Chemical Information
-
Solvant et solubilité
- Protocole
- Pureté et documentation
- Références
-
Help & FAQs
Activité biologique
|
Cell Line
|
Type | Value | Description | References |
|---|---|---|---|---|
| HEK293 | EC50 |
8.7 nM
Compound: 4
|
Inhibition of collagen I-induced DDR2 (unknown origin) phosphorylation expressed in HEK293 cells after 16 hrs by mesoscale discovery assay
Inhibition of collagen I-induced DDR2 (unknown origin) phosphorylation expressed in HEK293 cells after 16 hrs by mesoscale discovery assay
|
[PMID: 26191369] |
| NCI-H2286 | IC50 |
>10 μM
Compound: 4
|
Antiproliferative activity against human NCI-H2286 cells expressing DDR2 mutant after 72 hrs by alamar blue assay
Antiproliferative activity against human NCI-H2286 cells expressing DDR2 mutant after 72 hrs by alamar blue assay
|
[PMID: 26191369] |
Chemical Information
-
CAS No. 1644069-80-6
-
Appearance Solid
-
Masse moléculaire 417.44
-
Formule C23H20FN5O2
-
Color White to off-white
-
SMILES
O=C(C1=CN=C2C=CC=CN21)NC3=CC(CNC(NC4=CC=CC(F)=C4)=O)=CC=C3C
-
Livraison
Room temperature in continental US; may vary elsewhere.
-
Stockage
Powder -20°C 3 years 4°C 2 years In solvent -80°C 2 years -20°C 1 year
Solvant et solubilité
DMSO : 65 mg/mL (155.71 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.17 mg/mL (5.20 mM); Clear solution
This protocol yields a clear solution of ≥ 2.17 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (21.7 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Protocole
Europium Kinase binding assay is used. Compounds (DDR Inhibitor, etc.) are incubated with 0.5 nM DDR1 or 0.25 nM DDR2 for 1 hour at room temperature in low volume black 384 well assay plates containing 5 nM or 10 nM Kinase Tracer 178 respectively and 2 nM Europium labelled anti-GST antibody in assay buffer (50 mM HEPES pH 7.5, 10 mM MgCl2, 1 mM EGTA and 0.01 % BRIJ35). The ratio of fluorescence emission 665 nm/615 nm after excitation at 340 nm is obtained. IC50 values are determined from dose-response plots using nonlinear least-squares analysis[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Pureté et documentation
-
Fiche technique (274 KB)
-
SDS (393 KB)
- English - EN (393 KB)
- Français - FR (393 KB)
- Deutsch - DE (393 KB)
- Norwegian - NO (393 KB)
- Español - ES (393 KB)
- Swedish - SV (393 KB)
- Italian - IT (393 KB)
- Korean - KR (393 KB)
- Portuguese - PT (393 KB)
-
Instruction de manipulation (2659 KB)
Références
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.3956 mL | 11.9778 mL | 23.9555 mL | 59.8888 mL |
| 5 mM | 0.4791 mL | 2.3956 mL | 4.7911 mL | 11.9778 mL | |
| 10 mM | 0.2396 mL | 1.1978 mL | 2.3956 mL | 5.9889 mL | |
| 15 mM | 0.1597 mL | 0.7985 mL | 1.5970 mL | 3.9926 mL | |
| 20 mM | 0.1198 mL | 0.5989 mL | 1.1978 mL | 2.9944 mL | |
| 25 mM | 0.0958 mL | 0.4791 mL | 0.9582 mL | 2.3956 mL | |
| 30 mM | 0.0799 mL | 0.3993 mL | 0.7985 mL | 1.9963 mL | |
| 40 mM | 0.0599 mL | 0.2994 mL | 0.5989 mL | 1.4972 mL | |
| 50 mM | 0.0479 mL | 0.2396 mL | 0.4791 mL | 1.1978 mL | |
| 60 mM | 0.0399 mL | 0.1996 mL | 0.3993 mL | 0.9981 mL | |
| 80 mM | 0.0299 mL | 0.1497 mL | 0.2994 mL | 0.7486 mL | |
| 100 mM | 0.0240 mL | 0.1198 mL | 0.2396 mL | 0.5989 mL |
DDR Inhibitor Related Classifications
HY-W018931 Related Classifications
Powered by Bioz