(±)-Ibipinabant
Based on 1 publication(s) in Google Scholar
(±)-Ibipinabant ((±)-SLV319) is the racemate of SLV319. (±)-Ibipinabant ((±)-SLV319) is a potent and selective cannabinoid-1 (CB-1) receptor antagonist with an IC50 of 22 nM.
Nos produits utilisent uniquement pour la recherche. Nous ne vendons pas aux patients.
- Pureté: 99.30%
- CAS No.: 362519-49-1
- Formule: C23H20Cl2N4O2S
- Masse moléculaire:487.40
-
Stockage:
4°C, stored under nitrogen
* In solvent : -80°C, 6 months; -20°C, 1 month (stored under nitrogen)
Publications Citing Use of MedChemExpress (MCE) (±)-Ibipinabant
More
Activité biologique
|
Cell Line
|
Type | Value | Description | References |
|---|---|---|---|---|
| CHO | IC50 |
139 nM
Compound: SLV-319
|
Inverse agonist activity against CB1 receptor expressed in human CHO cells assessed as effect on forskolin-stimulated cAMP level
Inverse agonist activity against CB1 receptor expressed in human CHO cells assessed as effect on forskolin-stimulated cAMP level
|
[PMID: 22959249] |
Cannabinoid receptor 1 (CB1R) antagonists appear to be promising drugs for the treatment of obesity, however, serious side effects have hampered their clinical application. Ibipinabant is a new, potent [Ki (CB1)=7.8 nM] and selective [Ki (CB2)=7.943 nM] CB1 antagonist [pA2 for arachidonic acid release in CHO cells=9.9] with in vitro pharmacological characteristics similar to rimonabant including inverse agonism and brain penetrance[3].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Chemical Information
-
CAS No. 362519-49-1
-
Appearance Solid
-
Masse moléculaire 487.40
-
Formule C23H20Cl2N4O2S
-
Color White to off-white
-
SMILES
C/N=C(N1N=C(C2=CC=C(Cl)C=C2)C(C3=CC=CC=C3)C1)\NS(=O)(C4=CC=C(Cl)C=C4)=O
-
Synonyms
(±)-SLV319; (±)-BMS-646256
-
Livraison
Room temperature in continental US; may vary elsewhere.
-
Stockage
4°C, stored under nitrogen
* In solvent : -80°C, 6 months; -20°C, 1 month (stored under nitrogen)
Publications (1)
-
Journal Impact Factor
-
Most Recent
-
Int J Mol Sci
2024 May 3;25(9):5012. PMID: 38732230
Solvant et solubilité
DMSO : ≥ 31 mg/mL (63.60 mM; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
* "≥" means soluble, but saturation unknown.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (stored under nitrogen). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (stored under nitrogen). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (5.13 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL. * In solvent : -80°C, 6 months; -20°C, 1 month (stored under nitrogen)
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Protocole
Rats: SLV319, rimonabant and rosiglitazone are suspended in a 10% dimethylacetamide, 10% cremophor, 10% ethanol and 70% water vehicle. Drugs are administered by oral gavage in a volume of 2 mL/kg body weight at 09:00 hours every day. Treatment groups are as follows: (i) Vehicle: ad libitum access to food (vehicle), (ii) Vehicle: restricted access to food (20% less than average food intake of ad libitum vehicle-treated group for the first 3 days of the study, then 10% less than the average food intake of the ad libitum vehicle-treated group for the remainder of the study) (restricted), (iii) Rosiglitazone (4 mg/kg), (iv) Rimonabant (3 mg/kg) (RIM 3 mg/kg), (v) Rimonabant (10 mg/kg) (RIM 10 mg/kg), (vi) (±)-Ibipinabant ((±)-SLV319) (3 mg/kg) (IBI 3 mg/kg) and (vii) Ibipinabant (10 mg/kg) (IBI 10 mg/kg). Rosiglitazone is used as a positive control for its ability to delay β-cell decline, and rimonabant is used as a positive control for CB1 antagonism[3].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Pureté et documentation
-
Fiche technique (276 KB)
-
SDS (252 KB)
- English - EN (252 KB)
- Français - FR (252 KB)
- Deutsch - DE (252 KB)
- Norwegian - NO (252 KB)
- Español - ES (252 KB)
- Swedish - SV (252 KB)
- Italian - IT (252 KB)
- Korean - KR (252 KB)
- Portuguese - PT (252 KB)
-
Instruction de manipulation (2659 KB)
Références
[1]. Chorvat RJ, et al. JD-5006 and JD-5037: peripherally restricted (PR) cannabinoid-1 receptor blockers related to SLV-319 (Ibipinabant) as metabolic disorder therapeutics devoid of CNS liabilities. Bioorg Med Chem Lett. 2012 Oct 1;22(19):6173-80. [Content Brief]
[2]. Lange JH, et al. Synthesis, biological properties, and molecular modeling investigations of novel 3,4-diarylpyrazolines as potent and selective CB(1) cannabinoid receptor antagonists. J Med Chem. 2004 Jan 29;47(3):627-43. [Content Brief]
[3]. Rohrbach K, et al. Ibipinabant attenuates β-cell loss in male Zucker diabetic fatty rats independently of its effects on body weight. Diabetes Obes Metab. 2012 Jun;14(6):555-64. [Content Brief]
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (stored under nitrogen). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.0517 mL | 10.2585 mL | 20.5170 mL | 51.2926 mL |
| 5 mM | 0.4103 mL | 2.0517 mL | 4.1034 mL | 10.2585 mL | |
| 10 mM | 0.2052 mL | 1.0259 mL | 2.0517 mL | 5.1293 mL | |
| 15 mM | 0.1368 mL | 0.6839 mL | 1.3678 mL | 3.4195 mL | |
| 20 mM | 0.1026 mL | 0.5129 mL | 1.0259 mL | 2.5646 mL | |
| 25 mM | 0.0821 mL | 0.4103 mL | 0.8207 mL | 2.0517 mL | |
| 30 mM | 0.0684 mL | 0.3420 mL | 0.6839 mL | 1.7098 mL | |
| 40 mM | 0.0513 mL | 0.2565 mL | 0.5129 mL | 1.2823 mL | |
| 50 mM | 0.0410 mL | 0.2052 mL | 0.4103 mL | 1.0259 mL | |
| 60 mM | 0.0342 mL | 0.1710 mL | 0.3420 mL | 0.8549 mL |