KAG-308
Based on 3 publication(s) in Google Scholar
KAG-308 is a potent selective and orally active agonist of EP4 receptor (a prostaglandin E2 receptor subtype), suppresses colitis and promotes histological mucosal healing, potently inhibits TNF-α production. KAG-308 shows a Ki and an EC50 of 2.57 nM and 17 nM for human EP4 receptor, respectively, more selective over EP1, EP2, EP3 and IP receptor.
Para uso exclusivo en investigación. No vendemos a pacientes.
- Pureza: 98.62%
- No. CAS: 1215192-68-9
- Fòrmula: C24H30F2N4O3
- Peso molecular:460.52
-
Almacenamiento:
-20°C, stored under nitrogen
* In solvent : -80°C, 6 months; -20°C, 1 month (stored under nitrogen)
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Actividad biológica
-
Chemical Information
-
Solvente y solubilidad
- Pureza y Documentación
- Referencias
-
Help & FAQs
Publications Citing Use of MedChemExpress (MCE) KAG-308
More
Actividad biológica
EC50: 17 nM (Human EP4 receptor), 160 nM (Human EP3 receptor), 1000 nM (Human EP2 receptor), 1000 nM (Human EP2 receptor)[1]
Ki: 2.57 nM (Human EP4 receptor), 32.4 nM (Human EP3 receptor), 52.9 nM (Human IP receptor), 1410 nM (Human EP1 receptor), 1540 nM (Human EP2 receptor)[1]
KAG-308 is a potent selective and orally active agonist of EP4 receptor, suppresses colitis and promots histological mucosal healing. KAG-308 shows a Ki and EC50 values of 2.57 nM and 17 nM for human EP4 receptor, respectively, more selective over human EP1 (Ki, 1410 nM; EC50, 1000 nM), EP2 (Ki, 1540 nM; EC50, 1000 nM), EP3 (Ki, 32.4 nM; EC50, 160 nM) and IP receptor (Ki, 52.9 nM; EC50, >10000 nM). KAG-308 also exhibits potent agonist activity for human and mouse EP4 with an EC50 of 0.15 nM and 1.0 nM, respectively in the dual luciferase reporter assay[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Chemical Information
-
No. CAS 1215192-68-9
-
Appearance Solid
-
Peso molecular 460.52
-
Fòrmula C24H30F2N4O3
-
Color White to light yellow
-
SMILES
O[C@H](C1)[C@H](/C=C/[C@@H](O)[C@@H](C2=CC=CC(C)=C2)C)[C@](C/3(F)F)([H])[C@@]1([H])OC3=C/CCCC4=NN=NN4
-
Envío
Room temperature in continental US; may vary elsewhere.
-
Almacenamiento
-20°C, stored under nitrogen
* In solvent : -80°C, 6 months; -20°C, 1 month (stored under nitrogen)
Publications (3)
-
Journal Impact Factor
-
Most Recent
-
Cell
2025 Dec 11;188(25):7291-7308.e23. PMID: 41161316 -
Cancer Discov
Tumor-Derived Lysophosphatidic Acid Blunts Protective Type I Interferon Responses in Ovarian Cancer. [Abstract]2022 Aug 5;12(8):1904-1921. PMID: 35552618 -
In Vitro Cell Dev Biol Anim
Atorvastatin inhibits ischemia‒reperfusion-associated renal tubular cell ferroptosis by blocking the PGE2/EP4 signaling pathway. [Abstract]2025 Mar;61(3):275-287. PMID: 39920560
Solvente y solubilidad
DMSO : 80 mg/mL (173.72 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
H2O : < 0.1 mg/mL (insoluble)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (stored under nitrogen). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (stored under nitrogen). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: 6 mg/mL (13.03 mM); Clear solution; Need ultrasonic
This protocol yields a clear solution of 6 mg/mL.
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (60.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: 6 mg/mL (13.03 mM); Suspended solution; Need ultrasonic
This protocol yields a suspended solution of 6 mg/mL. Suspended solution can be used for oral and intraperitoneal injection.
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (60.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL. * In solvent : -80°C, 6 months; -20°C, 1 month (stored under nitrogen)
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Pureza y Documentación
-
Ficha de datos (274 KB)
-
SDS (252 KB)
- English - EN (252 KB)
- Français - FR (252 KB)
- Deutsch - DE (252 KB)
- Norwegian - NO (252 KB)
- Español - ES (252 KB)
- Swedish - SV (252 KB)
- Italian - IT (252 KB)
- Korean - KR (252 KB)
- Portuguese - PT (252 KB)
-
Instrucciones de manejo (2659 KB)
Referencias
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (stored under nitrogen). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.1715 mL | 10.8573 mL | 21.7146 mL | 54.2865 mL |
| 5 mM | 0.4343 mL | 2.1715 mL | 4.3429 mL | 10.8573 mL | |
| 10 mM | 0.2171 mL | 1.0857 mL | 2.1715 mL | 5.4286 mL | |
| 15 mM | 0.1448 mL | 0.7238 mL | 1.4476 mL | 3.6191 mL | |
| 20 mM | 0.1086 mL | 0.5429 mL | 1.0857 mL | 2.7143 mL | |
| 25 mM | 0.0869 mL | 0.4343 mL | 0.8686 mL | 2.1715 mL | |
| 30 mM | 0.0724 mL | 0.3619 mL | 0.7238 mL | 1.8095 mL | |
| 40 mM | 0.0543 mL | 0.2714 mL | 0.5429 mL | 1.3572 mL | |
| 50 mM | 0.0434 mL | 0.2171 mL | 0.4343 mL | 1.0857 mL | |
| 60 mM | 0.0362 mL | 0.1810 mL | 0.3619 mL | 0.9048 mL | |
| 80 mM | 0.0271 mL | 0.1357 mL | 0.2714 mL | 0.6786 mL | |
| 100 mM | 0.0217 mL | 0.1086 mL | 0.2171 mL | 0.5429 mL |
KAG-308 Related Classifications
HY-128686 Related Classifications
Powered by Bioz