Glisoxepide
Based on 1 Customer Validation
Glisoxepide, a sulphonamide derivative, is an orally available nonselective K(ATP) channel blocker, with antihyperglycemic activity and cardiovascular regulation effect.
For research use only. We do not sell to patients.
- Purity: 95.58%
- CAS No.: 25046-79-1
- Formula: C20H27N5O5S
- Molecular Weight:449.52
-
Storage:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 6 months , -20°C, 1 month
Biological Activity
K(ATP) channel[1]
Chemical Information
-
CAS No. 25046-79-1
-
Appearance Solid
-
Molecular Weight 449.52
-
Formula C20H27N5O5S
-
Color Off-white to yellow
-
SMILES
O=C(C1=NOC(C)=C1)NCCC2=CC=C(S(=O)(NC(NN3CCCCCC3)=O)=O)C=C2
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
Solvent & Solubility
DMSO : 100 mg/mL (222.46 mM; ultrasonic and warming and heat to 60°C; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (5.56 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Purity & Documentation
-
Data Sheet (270 KB)
-
SDS (393 KB)
- English - EN (393 KB)
- Français - FR (393 KB)
- Deutsch - DE (393 KB)
- Norwegian - NO (393 KB)
- Español - ES (393 KB)
- Swedish - SV (393 KB)
- Italian - IT (393 KB)
- Korean - KR (393 KB)
- Portuguese - PT (393 KB)
-
Handling Instructions (2659 KB)
References
[1]. Sato T, et al. Bepridil, an antiarrhythmic drug, opens mitochondrial KATP channels, blocks sarcolemmal KATP channels, and confers cardioprotection. J Pharmacol Exp Ther. 2006 Jan;316(1):182-8. Epub 2005 Sep 20. [Content Brief]
[2]. Selvaag E. Photohemolytic potency of oral antidiabetic drugs in vitro: effects of antioxidants and a nitrogen atmosphere. Photodermatol Photoimmunol Photomed. 1996 Aug;12(4):166-70. [Content Brief]
[3]. Fückel D, et al. Interaction of sulfonylureas with the transport of bile acids into hepatocytes. Eur J Pharmacol. 1992 Mar 31;213(3):393-404. [Content Brief]
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.2246 mL | 11.1230 mL | 22.2460 mL | 55.6149 mL |
| 5 mM | 0.4449 mL | 2.2246 mL | 4.4492 mL | 11.1230 mL | |
| 10 mM | 0.2225 mL | 1.1123 mL | 2.2246 mL | 5.5615 mL | |
| 15 mM | 0.1483 mL | 0.7415 mL | 1.4831 mL | 3.7077 mL | |
| 20 mM | 0.1112 mL | 0.5561 mL | 1.1123 mL | 2.7807 mL | |
| 25 mM | 0.0890 mL | 0.4449 mL | 0.8898 mL | 2.2246 mL | |
| 30 mM | 0.0742 mL | 0.3708 mL | 0.7415 mL | 1.8538 mL | |
| 40 mM | 0.0556 mL | 0.2781 mL | 0.5561 mL | 1.3904 mL | |
| 50 mM | 0.0445 mL | 0.2225 mL | 0.4449 mL | 1.1123 mL | |
| 60 mM | 0.0371 mL | 0.1854 mL | 0.3708 mL | 0.9269 mL | |
| 80 mM | 0.0278 mL | 0.1390 mL | 0.2781 mL | 0.6952 mL | |
| 100 mM | 0.0222 mL | 0.1112 mL | 0.2225 mL | 0.5561 mL |