Gymnoside III
Based on 1 Customer Validation
Gymnoside III is a glucosyloxybenzyl 2-isobutylmalate isolated from the tubers of Gymnadenia conopsea.
For research use only. We do not sell to patients.
- Purity: 98.36%
- CAS No.: 899430-03-6
- Formula: C42H58O23
- Molecular Weight:930.90
-
Storage:
4°C, protect from light
* In solvent : -80°C, 6 months; -20°C, 1 month (protect from light)
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Biological Activity
-
Chemical Information
-
Solvent & Solubility
- Purity & Documentation
- References
-
Help & FAQs
-
Bioactive Compound Library Max
HY-L181
-
Bioactive Compound Library
HY-L001
-
Natural Product Library
HY-L021
-
Glycoside Compound Library
HY-L042
-
Plant-Sourced Natural Product Library
HY-L115
-
Heterocyclic Compound Library
HY-L138
-
MCE Bioactive Compound Library
HY-L001V
-
Natural Product Library Plus
HY-L021P
-
Natural Product and Natural Product-Like Compound Library
HY-L021M
-
High-Throughput Bioactive Compound Library
HY-L205
-
High-Throughput Natural Product Library
HY-L206
-
Mass Spectrometry Natural Product Library
HY-L262
Biological Activity
Chemical Information
-
CAS No. 899430-03-6
-
Appearance Solid
-
Molecular Weight 930.90
-
Formula C42H58O23
-
Color White to off-white
-
SMILES
O=C(OCC(C=C1)=CC=C1O[C@@H]([C@@H]([C@H]2O)O)O[C@@H]([C@H]2O)CO)[C@](CC(OCC(C=C3)=CC=C3O[C@@H]([C@@H]([C@H]4O)O)O[C@@H]([C@H]4O)CO)=O)(CC(C)C)O[C@@H]([C@@H]([C@H]5O)O)O[C@@H]([C@H]5O)COC(C)=O
-
Structure Classification
-
Initial Source
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
4°C, protect from light
* In solvent : -80°C, 6 months; -20°C, 1 month (protect from light)
Solvent & Solubility
DMSO : ≥ 100 mg/mL (107.42 mM; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
* "≥" means soluble, but saturation unknown.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (2.69 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.5 mg/mL (2.69 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL. * In solvent : -80°C, 6 months; -20°C, 1 month (protect from light)
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Purity & Documentation
-
Data Sheet (276 KB)
-
SDS (251 KB)
- English - EN (251 KB)
- Français - FR (251 KB)
- Deutsch - DE (251 KB)
- Norwegian - NO (251 KB)
- Español - ES (251 KB)
- Swedish - SV (251 KB)
- Italian - IT (251 KB)
- Korean - KR (251 KB)
- Portuguese - PT (251 KB)
-
Handling Instructions (2659 KB)
References
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 1.0742 mL | 5.3711 mL | 10.7423 mL | 26.8557 mL |
| 5 mM | 0.2148 mL | 1.0742 mL | 2.1485 mL | 5.3711 mL | |
| 10 mM | 0.1074 mL | 0.5371 mL | 1.0742 mL | 2.6856 mL | |
| 15 mM | 0.0716 mL | 0.3581 mL | 0.7162 mL | 1.7904 mL | |
| 20 mM | 0.0537 mL | 0.2686 mL | 0.5371 mL | 1.3428 mL | |
| 25 mM | 0.0430 mL | 0.2148 mL | 0.4297 mL | 1.0742 mL | |
| 30 mM | 0.0358 mL | 0.1790 mL | 0.3581 mL | 0.8952 mL | |
| 40 mM | 0.0269 mL | 0.1343 mL | 0.2686 mL | 0.6714 mL | |
| 50 mM | 0.0215 mL | 0.1074 mL | 0.2148 mL | 0.5371 mL | |
| 60 mM | 0.0179 mL | 0.0895 mL | 0.1790 mL | 0.4476 mL | |
| 80 mM | 0.0134 mL | 0.0671 mL | 0.1343 mL | 0.3357 mL | |
| 100 mM | 0.0107 mL | 0.0537 mL | 0.1074 mL | 0.2686 mL |
Gymnoside III Related Classifications
HY-N7673 Related Classifications
Powered by Bioz