HSD17B13-IN-3
Based on 1 Customer Validation
HSD17B13-IN-3 (compound 2) is a potent hydroxysteroid 17ß-dehydrogenase 13 (HSD17B13) inhibitor with IC50s of 0.38 μM and 0.45 μM in biochemical assays using both β-estradiol or Leukotriene B4 (LTB4) as substrate and NAD+ as cofactor. HSD17B13-IN-3 shows low cell penetration.
For research use only. We do not sell to patients.
- Purity: 99.78%
- CAS No.: 313259-88-0
- Formula: C22H21NO6S2
- Molecular Weight:459.54
-
Storage:
4°C, sealed storage, away from moisture and light
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light)
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Biological Activity
-
Chemical Information
-
Solvent & Solubility
- Purity & Documentation
- References
-
Help & FAQs
All 17β-HSD Isoforms
More
Biological Activity
Chemical Information
-
CAS No. 313259-88-0
-
Appearance Solid
-
Molecular Weight 459.54
-
Formula C22H21NO6S2
-
Color Off-white to light yellow
-
SMILES
CC1=C(S(C2=CC=C(C)C=C2)(=O)=O)C=C(C)C=C1S(=O)(NC3=CC=C(C(O)=O)C=C3)=O
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
4°C, sealed storage, away from moisture and light
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light)
Solvent & Solubility
DMSO : 260 mg/mL (565.78 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 6.5 mg/mL (14.14 mM); Clear solution
This protocol yields a clear solution of ≥ 6.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (65.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL. * In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light)
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Purity & Documentation
-
Data Sheet (271 KB)
-
SDS (252 KB)
- English - EN (252 KB)
- Français - FR (252 KB)
- Deutsch - DE (252 KB)
- Norwegian - NO (252 KB)
- Español - ES (252 KB)
- Swedish - SV (252 KB)
- Italian - IT (252 KB)
- Korean - KR (252 KB)
- Portuguese - PT (252 KB)
-
Handling Instructions (2659 KB)
References
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.1761 mL | 10.8804 mL | 21.7609 mL | 54.4022 mL |
| 5 mM | 0.4352 mL | 2.1761 mL | 4.3522 mL | 10.8804 mL | |
| 10 mM | 0.2176 mL | 1.0880 mL | 2.1761 mL | 5.4402 mL | |
| 15 mM | 0.1451 mL | 0.7254 mL | 1.4507 mL | 3.6268 mL | |
| 20 mM | 0.1088 mL | 0.5440 mL | 1.0880 mL | 2.7201 mL | |
| 25 mM | 0.0870 mL | 0.4352 mL | 0.8704 mL | 2.1761 mL | |
| 30 mM | 0.0725 mL | 0.3627 mL | 0.7254 mL | 1.8134 mL | |
| 40 mM | 0.0544 mL | 0.2720 mL | 0.5440 mL | 1.3601 mL | |
| 50 mM | 0.0435 mL | 0.2176 mL | 0.4352 mL | 1.0880 mL | |
| 60 mM | 0.0363 mL | 0.1813 mL | 0.3627 mL | 0.9067 mL | |
| 80 mM | 0.0272 mL | 0.1360 mL | 0.2720 mL | 0.6800 mL | |
| 100 mM | 0.0218 mL | 0.1088 mL | 0.2176 mL | 0.5440 mL |
HSD17B13-IN-3 Related Classifications
HY-156736 Related Classifications
Powered by Bioz