P2X3 antagonist 34
Based on 1 Customer Validation
P2X3 antagonist 34 is a potent, selective and orally active P2X3 homotrimeric receptor antagonist with IC50s of 25 nM, 92 nM and 126 nM for human P2X3, rat P2X3 and guinea pig P2X3 receptors, respectively. P2X3 antagonist 34 is less active against human, rat and guinea pig P2X2/3 heterotrimeric receptors. P2X3 antagonist 34 has strong anti-tussive effect.
For research use only. We do not sell to patients.
- Purity: 99.44%
- CAS No.: 2417288-67-4
- Formula: C24H26F2N4O3
- Molecular Weight:456.49
-
Storage:
-20°C, protect from light
* In solvent : -80°C, 6 months; -20°C, 1 month (protect from light)
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Biological Activity
-
Chemical Information
-
Solvent & Solubility
- Purity & Documentation
- References
-
Help & FAQs
-
Immunology/Inflammation Compound Library
HY-L007
-
Membrane Transporter/Ion Channel Compound Library
HY-L011
-
Orally Active Compound Library
HY-L061
-
Neurotransmitter Receptor Compound Library
HY-L062
-
Targeted Diversity Library
HY-L099
-
Heterocyclic Compound Library
HY-L138
-
Membrane Protein-targeted Compound Library
HY-L149
-
Membrane Receptor-targeted Compound Library
HY-L150
-
Highly Selective Inhibitors Library
HY-L158
-
Ion Channel Compound Library
HY-L166
-
Bioactive Compound Library Max
HY-L181
-
MCE Bioactive Compound Library
HY-L001V
-
Bioactive Compound Library
HY-L001
-
High-Throughput Bioactive Compound Library
HY-L205
All P2X Receptor Isoforms
More
Biological Activity
|
P2X3 Receptor |
P2X3 antagonist 34 (BLU-5937; 500 nM) is able to block αβ-meATP-induced sensitization and firing activity of isolated primary nociceptors in rat dorsal root ganglions (DRGs), through P2X3 homotrimeric receptor antagonism. The sensitizing effect of αβ-meATP and the inhibition of P2X3 antagonist 34 are reversible after washout[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
P2X3 antagonist 34 (BLU-5937; 3 and 30 mg/kg, oral) is also shown to reduce significantly and dose-dependently the ATP-induced enhancement of citric acid-induced coughs in the guinea pig[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Animal Model:Male Dunkin Hartley guinea pigs[1]
-
Dosage:0.3 mg/kg, 3 mg/kg, 30 mg/kg
-
Administration:Oral administration
-
Result:Significantly reduced the histamine-induced enhancement in the number of citric acid-induced coughs in a dose-dependent fashion.
Chemical Information
-
CAS No. 2417288-67-4
-
Appearance Solid
-
Molecular Weight 456.49
-
Formula C24H26F2N4O3
-
Color Off-white to light yellow
-
SMILES
O=C(OC)N1C[C@@H](CCC1)CC2=C(N=C3C=C(C=CN32)C)C4=C(C=C(C=C4F)C(NC)=O)F
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
-20°C, protect from light
* In solvent : -80°C, 6 months; -20°C, 1 month (protect from light)
Solvent & Solubility
DMSO : 100 mg/mL (219.06 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (5.48 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.5 mg/mL (5.48 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL. * In solvent : -80°C, 6 months; -20°C, 1 month (protect from light)
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Purity & Documentation
-
Data Sheet (276 KB)
-
SDS (252 KB)
- English - EN (252 KB)
- Français - FR (252 KB)
- Deutsch - DE (252 KB)
- Norwegian - NO (252 KB)
- Español - ES (252 KB)
- Swedish - SV (252 KB)
- Italian - IT (252 KB)
- Korean - KR (252 KB)
- Portuguese - PT (252 KB)
-
Handling Instructions (2659 KB)
References
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.1906 mL | 10.9531 mL | 21.9063 mL | 54.7657 mL |
| 5 mM | 0.4381 mL | 2.1906 mL | 4.3813 mL | 10.9531 mL | |
| 10 mM | 0.2191 mL | 1.0953 mL | 2.1906 mL | 5.4766 mL | |
| 15 mM | 0.1460 mL | 0.7302 mL | 1.4604 mL | 3.6510 mL | |
| 20 mM | 0.1095 mL | 0.5477 mL | 1.0953 mL | 2.7383 mL | |
| 25 mM | 0.0876 mL | 0.4381 mL | 0.8763 mL | 2.1906 mL | |
| 30 mM | 0.0730 mL | 0.3651 mL | 0.7302 mL | 1.8255 mL | |
| 40 mM | 0.0548 mL | 0.2738 mL | 0.5477 mL | 1.3691 mL | |
| 50 mM | 0.0438 mL | 0.2191 mL | 0.4381 mL | 1.0953 mL | |
| 60 mM | 0.0365 mL | 0.1826 mL | 0.3651 mL | 0.9128 mL | |
| 80 mM | 0.0274 mL | 0.1369 mL | 0.2738 mL | 0.6846 mL | |
| 100 mM | 0.0219 mL | 0.1095 mL | 0.2191 mL | 0.5477 mL |
P2X3 antagonist 34 Related Classifications
HY-135976 Related Classifications
Powered by Bioz