Rocuronium Bromide
Based on 2 publication(s) in Google Scholar
Rocuronium Bromide (ORG 9426 Bromide) is an aminosteroid non-depolarizing neuromuscular blocker or muscle relaxant used in modern anaesthesia, to facilitate endotracheal intubation and to provide skeletal musclerelaxation during surgery or mechanical ventilation.
For research use only. We do not sell to patients.
- Purity: 98.0%
- CAS No.: 119302-91-9
- Formula: C32H53BrN2O4
- Molecular Weight:609.68
-
Storage:
4°C, sealed storage, away from moisture
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
Publications Citing Use of MedChemExpress (MCE) Rocuronium Bromide
More
Biological Activity
Rocuronium reduced the indirectly elicited twitch tensions in normal (50% inhibitory concentration [IC(50)], 9.84 [9.64-10.04] μM, mean [95% confidence interval]) and all pretreated diaphragms (P < .01, n = 6) in a concentration-dependent fashion [1]. The ED95 of rocuronium is essentially the same for children as for adults. Its duration of action is similar to vecuronium, and it is shorter for children than for adults. Rocuronium is readily reversed with conventional doses of cholinesterase-inhibiting drugs [2]. Onset time until maximum block, duration until 25% recovery of twitch height, and recovery from 25 until 75% of twitch height were 1.7 (32), 53 (19) and 20 (37) min, respectively [3].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
| NCT Number | Sponsor | Condition | Start Date |
Phase
|
|---|---|---|---|---|
| NCT01329991 | Plexxikon| | 2011-05 | PHASE1 |
Chemical Information
-
CAS No. 119302-91-9
-
Appearance Solid
-
Molecular Weight 609.68
-
Formula C32H53BrN2O4
-
Color White to off-white
-
SMILES
C[C@@]12[C@](C[C@H]([N+]3(CC=C)CCCC3)[C@@H]2OC(C)=O)([H])[C@]([C@]4([H])CC1)([H])CC[C@@]([C@]4(C)C5)([H])C[C@H](O)[C@H]5N6CCOCC6.[Br-]
-
Synonyms
ORG 9426 Bromide
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
4°C, sealed storage, away from moisture
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
Publications (2)
-
Journal Impact Factor
-
Most Recent
-
Sci Rep
Ablation of EYS in zebrafish causes mislocalisation of outer segment proteins, F-actin disruption and cone-rod dystrophy. [Abstract]2017 Apr 5:7:46098. PMID: 28378834 -
Hum Mol Genet
Knockout of RP2 decreases GRK1 and rod transducin subunits and leads to photoreceptor degeneration in zebrafish. [Abstract]2015 Aug 15;24(16):4648-59. PMID: 26034134
Solvent & Solubility
DMSO : 100 mg/mL (164.02 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
H2O : 100 mg/mL (164.02 mM; Need ultrasonic)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
For the following dissolution methods, please prepare the working solution directly:
It is recommended to prepare fresh solutions and use them promptly within a short period of time.
The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: PBS
Solubility: 100 mg/mL (164.02 mM); Clear solution; Need ultrasonic
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Working solution concentration: 0.22 mg/mL
This product has good water solubility, please refer to the measured solubility data in water/PBS/Saline for details.
Purity & Documentation
-
Data Sheet (278 KB)
-
SDS (396 KB)
- English - EN (396 KB)
- Français - FR (396 KB)
- Deutsch - DE (396 KB)
- Norwegian - NO (396 KB)
- Español - ES (396 KB)
- Swedish - SV (396 KB)
- Italian - IT (396 KB)
- Korean - KR (396 KB)
- Portuguese - PT (396 KB)
-
Handling Instructions (2659 KB)
References
[1]. Narimatsu E, Niiya T, Takahashi K, Pralidoxime inhibits paraoxon-induced depression of rocuronium-neuromuscular block in a time-dependentfashion. Am J Emerg Med. 2012 Jul;30(6):901-7. [Content Brief]
[2]. Wicks TC. The pharmacology of rocuronium bromide (ORG 9426). AANA J. 1994 Feb;62(1):33-8. [Content Brief]
[3]. Wierda JM, Kleef UW, Lambalk LM, The pharmacodynamics and pharmacokinetics of Org 9426, a new non-depolarizing neuromuscular blocking agent, in patients anaesthetized with nitrous oxide, halothane and fentanyl. Can J Anaesth. 1991 May;38(4 Pt 1):430-5. [Content Brief]
[4]. Khuenl-Brady K, Castagnoli KP, Canfell PC, The neuromuscular blocking effects and pharmacokinetics of ORG 9426 and ORG 9616 in the cat. Anesthesiology. 1990 Apr;72(4):669-74. [Content Brief]
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO / H2O | 1 mM | 1.6402 mL | 8.2010 mL | 16.4020 mL | 41.0051 mL |
| 5 mM | 0.3280 mL | 1.6402 mL | 3.2804 mL | 8.2010 mL | |
| 10 mM | 0.1640 mL | 0.8201 mL | 1.6402 mL | 4.1005 mL | |
| 15 mM | 0.1093 mL | 0.5467 mL | 1.0935 mL | 2.7337 mL | |
| 20 mM | 0.0820 mL | 0.4101 mL | 0.8201 mL | 2.0503 mL | |
| 25 mM | 0.0656 mL | 0.3280 mL | 0.6561 mL | 1.6402 mL | |
| 30 mM | 0.0547 mL | 0.2734 mL | 0.5467 mL | 1.3668 mL | |
| 40 mM | 0.0410 mL | 0.2050 mL | 0.4101 mL | 1.0251 mL | |
| 50 mM | 0.0328 mL | 0.1640 mL | 0.3280 mL | 0.8201 mL | |
| 60 mM | 0.0273 mL | 0.1367 mL | 0.2734 mL | 0.6834 mL | |
| 80 mM | 0.0205 mL | 0.1025 mL | 0.2050 mL | 0.5126 mL | |
| 100 mM | 0.0164 mL | 0.0820 mL | 0.1640 mL | 0.4101 mL |
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.