Quadrol
Based on 1 Customer Validation
Quadrol is an immunostimulant that has been considered as a potentially useful active molecule for accelerating wound healing. Quadrol can form a complex with Ca2+, mediate the entry of Ca2+ into macrophages, and stimulate macrophage activation.
商品は「研究用試薬」です。人や動物の医療用・臨床診断用・食品用の製品ではありません。
研究用途以外に使用した場合、当社は一切の責任を負いかねます。
- 純度 : 99.96%
- CAS 番号: 102-60-3
- 分子式: C14H32N2O4
- 分子量:292.41
-
保管条件:Pure form -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 6 months , -20°C, 1 month
Calcium Channel アイソフォーム固有の製品をすべて表示
More
生物活性
製品説明
体外実験
Results show that viability of macrophages incubated with Quadrol at concentrations of 0.5 mM, 1 mM and 4mM are identical to that for controls. Viability, however, is reduced to 50% of control at concentrations of 16 mM to 32 mM. After four hours, at concentrations of 1 mM and 4 mM, Quadrol produces enhanced spreading of 88% and 80%, respectively, as compared to the control of 28%. Quadrol, at a concentration of 16 mM, shows reduced percentage of spreading of macrophages after four hours. Exposure of macrophages to 1.0 mM or 4.0 mM Quadrol concentrations enhances phagocytic activity, 41% and 57%, respectively, over that of the cells exposed to media alone (34%)[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only. Further protocols information, click here.
体内実験
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
化学情報
-
CAS 番号 102-60-3
-
性状 Oil
-
分子量 292.41
-
分子式 C14H32N2O4
-
Color Colorless to light yellow
-
SMILES
CC(O)CN(CC(O)C)CCN(CC(O)C)CC(O)C
-
別名
N,N,N′,N′-Tetrakis(2-hydroxypropyl)ethylenediamine; EDTP
-
輸送条件
Room temperature in continental US; may vary elsewhere.
-
保管条件
Pure form -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
溶剤 & 溶解度
体外:
Ethanol : 100 mg/mL (341.99 mM; Need ultrasonic)
DMSO : 100 mg/mL (341.99 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
濃度 (開始) × 体積 (開始) = 濃度 (終了) × 体積 (終了)
体内:
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (8.55 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.5 mg/mL (8.55 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
In Vivo Dissolution Calculator
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
プロトコル
-
Cell migration
Cell migration is a method that plays an important role in wound healing, cell differentiation, embryonic development, etc.
-
Ca2+ Staining Technique
Ca2+ staining is an experimental technique that utilizes specific fluorescent probes (such as Fluo-4 AM, Fura-2, etc.) to qualitatively or quantitatively detect dynamic changes in intracellular Ca2+ concentrations; this is achieved by monitoring the changes in fluorescent signals generated when these probes bind to free intracellular calcium ions. The underlying principle relies primarily on the presence of chelating groups within the probe's molecular structure that possess high affinity for calcium ions.
-
Cell-Exclusion Zone Migration Assay
The Cell-Exclusion Zone (CEZ) migration assay is an in vitro 2D cell migration method in which a defined cell-free area is created using removable physical barriers such as silicone stoppers, allowing cells to be seeded around the barrier and subsequently migrate into the cleared zone after barrier removal. This approach enables quantification of collective cell migration by monitoring repopulation of the initially cell-free region over time using microscopy-based imaging. Compared with scratch-based wound healing assays, barrier-based exclusion methods are designed to avoid mechanical damage to the extracellular matrix and reduce injury-induced effects on boundary cells, thereby improving interpretability of migration behavior in vitro. The assay readout is typically the progressive reduction in the cell-free area or the number of cells invading the exclusion zone, reflecting coordinated cell motility relevant to physiological processes such as wound healing, epithelial repair, and ca
純度とドキュメンテーション
-
データシート (274 KB)
-
SDS (396 KB)
- English - EN (396 KB)
- Français - FR (396 KB)
- Deutsch - DE (396 KB)
- Norwegian - NO (396 KB)
- Español - ES (396 KB)
- Swedish - SV (396 KB)
- Italian - IT (396 KB)
- Korean - KR (396 KB)
- Portuguese - PT (396 KB)
-
取扱説明書 (2659 KB)
参考文献
[1]. Bhide MV, et al. Investigation into the mechanism of stimulation of macrophages by Quadrol. Immunopharmacol Immunotoxicol. 1987;9(1):129-41. [Content Brief]
[2]. Bhide MV, et al. In vitro stimulation of macrophages by quadrol [N,N,N',N'-tetrakis(2-hydroxypropyl)ethylenediamine]. J Immunopharmacol. 1985;7(3):303-12. [Content Brief]
[3]. Bhide MV, et al. Promotion of wound collagen formation in normal and diabetic mice by quadrol. Immunopharmacol Immunotoxicol. 1988;10(4):513-22. [Content Brief]
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| Ethanol / DMSO | 1 mM | 3.4199 mL | 17.0993 mL | 34.1986 mL | 85.4964 mL |
| 5 mM | 0.6840 mL | 3.4199 mL | 6.8397 mL | 17.0993 mL | |
| 10 mM | 0.3420 mL | 1.7099 mL | 3.4199 mL | 8.5496 mL | |
| 15 mM | 0.2280 mL | 1.1400 mL | 2.2799 mL | 5.6998 mL | |
| 20 mM | 0.1710 mL | 0.8550 mL | 1.7099 mL | 4.2748 mL | |
| 25 mM | 0.1368 mL | 0.6840 mL | 1.3679 mL | 3.4199 mL | |
| 30 mM | 0.1140 mL | 0.5700 mL | 1.1400 mL | 2.8499 mL | |
| 40 mM | 0.0855 mL | 0.4275 mL | 0.8550 mL | 2.1374 mL | |
| 50 mM | 0.0684 mL | 0.3420 mL | 0.6840 mL | 1.7099 mL | |
| 60 mM | 0.0570 mL | 0.2850 mL | 0.5700 mL | 1.4249 mL | |
| 80 mM | 0.0427 mL | 0.2137 mL | 0.4275 mL | 1.0687 mL | |
| 100 mM | 0.0342 mL | 0.1710 mL | 0.3420 mL | 0.8550 mL |