DUPA
Based on 1 Customer Validation
DUPA, belongs to a class of glutamate ureas, is used as the targeting moiety in agent conjugate to selectively deliver cytotoxic agents to prostate cancer cells.
商品は「研究用試薬」です。人や動物の医療用・臨床診断用・食品用の製品ではありません。
研究用途以外に使用した場合、当社は一切の責任を負いかねます。
- 純度: 98.0%
- CAS 番号: 302941-52-2
- 分子式: C11H16N2O9
- 分子量:320.25
-
保管条件:Powder -20°C, 3 years ; In solvent -80°C, 6 months , -20°C, 1 month
生物活性
製品説明
体外実験
DUPA is used as the targeting moiety to actively deliver Docetaxel (DTX) for treatment of prostate-specific membrane antigen (PSMA) expressing prostate cancer[1]. The DUPA-indenoisoquinoline conjugate exhibits an IC50 in the low nanomolar range in 22RV1 cell cultures[2].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
体内実験
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
化学情報
-
CAS 番号 302941-52-2
-
性状 Solid
-
分子量 320.25
-
分子式 C11H16N2O9
-
Color White to off-white
-
SMILES
O=C(N[C@](CCC(O)=O)([H])C(O)=O)N[C@](CCC(O)=O)([H])C(O)=O
-
輸送条件
Room temperature in continental US; may vary elsewhere.
-
保管条件
Powder -20°C 3 years In solvent -80°C 6 months -20°C 1 month
溶剤 & 溶解度
体外:
DMSO : ≥ 300 mg/mL (936.77 mM; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
H2O : ≥ 150 mg/mL (468.38 mM)
* "≥" means soluble, but saturation unknown.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.
濃度 (開始) × 体積 (開始) = 濃度 (終了) × 体積 (終了)
体内:
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 7.5 mg/mL (23.42 mM); Clear solution
This protocol yields a clear solution of ≥ 7.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (75.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 7.5 mg/mL (23.42 mM); Clear solution
This protocol yields a clear solution of ≥ 7.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (75.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
In Vivo Dissolution Calculator
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Working solution concentration: 0.22 mg/mL
This product has good water solubility, please refer to the measured solubility data in water/PBS/Saline for details.
純度とドキュメンテーション
-
データシート (276 KB)
-
SDS (393 KB)
- English - EN (393 KB)
- Français - FR (393 KB)
- Deutsch - DE (393 KB)
- Norwegian - NO (393 KB)
- Español - ES (393 KB)
- Swedish - SV (393 KB)
- Italian - IT (393 KB)
- Korean - KR (393 KB)
- Portuguese - PT (393 KB)
-
取扱説明書 (2659 KB)
参考文献
[1]. Peng ZH, et al. Spacer length impacts the efficacy of targeted docetaxel conjugates in prostate-specific membrane antigen expressing prostate cancer. J Drug Target. 2013 Dec;21(10):968-80. [Content Brief]
[2]. Roy J, et al. DUPA conjugation of a cytotoxic indenoisoquinoline topoisomerase I inhibitor for selective prostate cancer cell targeting. J Med Chem. 2015 Apr 9;58(7):3094-103. [Content Brief]
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| H2O / DMSO | 1 mM | 3.1226 mL | 15.6128 mL | 31.2256 mL | 78.0640 mL |
| 5 mM | 0.6245 mL | 3.1226 mL | 6.2451 mL | 15.6128 mL | |
| 10 mM | 0.3123 mL | 1.5613 mL | 3.1226 mL | 7.8064 mL | |
| 15 mM | 0.2082 mL | 1.0409 mL | 2.0817 mL | 5.2043 mL | |
| 20 mM | 0.1561 mL | 0.7806 mL | 1.5613 mL | 3.9032 mL | |
| 25 mM | 0.1249 mL | 0.6245 mL | 1.2490 mL | 3.1226 mL | |
| 30 mM | 0.1041 mL | 0.5204 mL | 1.0409 mL | 2.6021 mL | |
| 40 mM | 0.0781 mL | 0.3903 mL | 0.7806 mL | 1.9516 mL | |
| 50 mM | 0.0625 mL | 0.3123 mL | 0.6245 mL | 1.5613 mL | |
| 60 mM | 0.0520 mL | 0.2602 mL | 0.5204 mL | 1.3011 mL | |
| 80 mM | 0.0390 mL | 0.1952 mL | 0.3903 mL | 0.9758 mL | |
| 100 mM | 0.0312 mL | 0.1561 mL | 0.3123 mL | 0.7806 mL |
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.