Forsythoside E
Based on 1 publication(s) in Google Scholar
Forsythoside E is a phenylethanoid glycoside compound. Forsythoside E can be isolated from Shuanghuanglian. Forsythoside E does not induce vascular leakage or promote histamine release in mice. Forsythoside E does not cause pseudo-allergic reactions.
商品は「研究用試薬」です。人や動物の医療用・臨床診断用・食品用の製品ではありません。
研究用途以外に使用した場合、当社は一切の責任を負いかねます。
- 純度: 99.01%
- CAS 番号: 93675-88-8
- 分子式: C20H30O12
- 分子量:462.45
-
保管条件:
4°C, protect from light
* In solvent : -80°C, 6 months; -20°C, 1 month (protect from light)
MedChemExpress(MCE)の使用を引用している文献 Forsythoside E
More
生物活性
Forsythoside E (50-150 µg/mL; 2 h) does not induce degranulation in RBL-2H3 cells[1].
Forsythoside E (50-150 µg/mL; 1 h, 30 min) does not disrupt endothelial monolayer permeability or activate the RhoA/ROCK signaling pathway in HUVECs[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Animal Model:ICR mice (8-10 weeks of age, specific-pathogen-free)[1]
-
Dosage:100 mg/kg
-
Administration:i.v.; single dose
-
Result:Showed no visible blue stain in ear tissue.
Had Evans blue extravasation scores and extracted Evans blue levels comparable to normal saline control group.
Did not elevate plasma histamine concentrations relative to normal saline control group.
化学情報
-
CAS 番号 93675-88-8
-
性状 Solid
-
分子量 462.45
-
分子式 C20H30O12
-
Color White to off-white
-
SMILES
O[C@@H]([C@H](O)[C@H]1O)[C@H](O[C@H]1OCCC2=CC(O)=C(O)C=C2)CO[C@H](O[C@@H](C)[C@H](O)[C@H]3O)[C@@H]3O
-
Structure Classification
-
Initial Source
-
輸送条件
Room temperature in continental US; may vary elsewhere.
-
保管条件
4°C, protect from light
* In solvent : -80°C, 6 months; -20°C, 1 month (protect from light)
Publications (1)
-
Journal Impact Factor
-
Most Recent
-
Adv Sci (Weinh)
ZFPL1 Promotes Colorectal Cancer Progression by Stabilizing ASS1 to Drive the Urea Cycle and M2 Macrophage-Mediated Metastatic Colonization. [Abstract]2025 Dec;12(46):e05291. PMID: 41216870
溶剤 & 溶解度
DMSO : 100 mg/mL (216.24 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
濃度 (開始) × 体積 (開始) = 濃度 (終了) × 体積 (終了)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (5.41 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: 2.5 mg/mL (5.41 mM); Suspended solution; Need ultrasonic
This protocol yields a suspended solution of 2.5 mg/mL. Suspended solution can be used for oral and intraperitoneal injection.
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL. * In solvent : -80°C, 6 months; -20°C, 1 month (protect from light)
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
純度とドキュメンテーション
-
データシート (276 KB)
-
SDS (393 KB)
- English - EN (393 KB)
- Français - FR (393 KB)
- Deutsch - DE (393 KB)
- Norwegian - NO (393 KB)
- Español - ES (393 KB)
- Swedish - SV (393 KB)
- Italian - IT (393 KB)
- Korean - KR (393 KB)
- Portuguese - PT (393 KB)
-
取扱説明書 (2659 KB)
参考文献
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.1624 mL | 10.8120 mL | 21.6240 mL | 54.0599 mL |
| 5 mM | 0.4325 mL | 2.1624 mL | 4.3248 mL | 10.8120 mL | |
| 10 mM | 0.2162 mL | 1.0812 mL | 2.1624 mL | 5.4060 mL | |
| 15 mM | 0.1442 mL | 0.7208 mL | 1.4416 mL | 3.6040 mL | |
| 20 mM | 0.1081 mL | 0.5406 mL | 1.0812 mL | 2.7030 mL | |
| 25 mM | 0.0865 mL | 0.4325 mL | 0.8650 mL | 2.1624 mL | |
| 30 mM | 0.0721 mL | 0.3604 mL | 0.7208 mL | 1.8020 mL | |
| 40 mM | 0.0541 mL | 0.2703 mL | 0.5406 mL | 1.3515 mL | |
| 50 mM | 0.0432 mL | 0.2162 mL | 0.4325 mL | 1.0812 mL | |
| 60 mM | 0.0360 mL | 0.1802 mL | 0.3604 mL | 0.9010 mL | |
| 80 mM | 0.0270 mL | 0.1351 mL | 0.2703 mL | 0.6757 mL | |
| 100 mM | 0.0216 mL | 0.1081 mL | 0.2162 mL | 0.5406 mL |