1-Eicosanol
Based on 1 Customer Validation
1-Eicosanol (Arachidyl alcohol) is a long-chain fatty alcohol and volatile organic compound that can be isolated from the leaves of Leea indica and produced by Bacillus velezensis ZJ1. 1-Eicosanol inhibits mycelial growth of Alternaria solani and Botrytis cinerea. 1-Eicosanol is applicable to research related to tomato early blight and tomato gray mold.
For research use only. We do not sell to patients.
- Purity: 98.30%
- CAS No.: 629-96-9
- Formula: C20H42O
- Molecular Weight:298.55
-
Storage:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 6 months , -20°C, 1 month
Biological Activity
1-Eicosanol (5 μL; 7 d) weakly inhibits mycelial growth of Alternaria solani with an inhibition rate below 20%[2].
1-Eicosanol (5 μL; 7 d) very weakly inhibits mycelial growth of Botrytis cinerea with an inhibition rate below 10%[2].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Chemical Information
-
CAS No. 629-96-9
-
Appearance Solid
-
Molecular Weight 298.55
-
Formula C20H42O
-
Color White to off-white
-
SMILES
OCCCCCCCCCCCCCCCCCCCC
-
Synonyms
Arachidyl alcohol
-
Structure Classification
-
Initial Source
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
Solvent & Solubility
Ethanol : 20 mg/mL (66.99 mM; Need ultrasonic)
DMSO : 2 mg/mL (6.70 mM; ultrasonic and warming and heat to 60°C; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
H2O : < 0.1 mg/mL (insoluble)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% EtOH 90% Corn Oil
Solubility: ≥ 2 mg/mL (6.70 mM); Clear solution
This protocol yields a clear solution of ≥ 2 mg/mL (saturation unknown). If the continuous dosing period exceeds half a month, please choose this protocol carefully.
Taking 1 mL working solution as an example, add 100 μL EtOH stock solution (20.0 mg/mL) to 900 μL Corn oil, and mix evenly.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Purity & Documentation
-
Data Sheet (270 KB)
-
SDS (396 KB)
- English - EN (396 KB)
- Français - FR (396 KB)
- Deutsch - DE (396 KB)
- Norwegian - NO (396 KB)
- Español - ES (396 KB)
- Swedish - SV (396 KB)
- Italian - IT (396 KB)
- Korean - KR (396 KB)
- Portuguese - PT (396 KB)
-
Handling Instructions (2659 KB)
References
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO / Ethanol | 1 mM | 3.3495 mL | 16.7476 mL | 33.4952 mL | 83.7381 mL |
| 5 mM | 0.6699 mL | 3.3495 mL | 6.6990 mL | 16.7476 mL | |
| Ethanol | 10 mM | 0.3350 mL | 1.6748 mL | 3.3495 mL | 8.3738 mL |
| 15 mM | 0.2233 mL | 1.1165 mL | 2.2330 mL | 5.5825 mL | |
| 20 mM | 0.1675 mL | 0.8374 mL | 1.6748 mL | 4.1869 mL | |
| 25 mM | 0.1340 mL | 0.6699 mL | 1.3398 mL | 3.3495 mL | |
| 30 mM | 0.1117 mL | 0.5583 mL | 1.1165 mL | 2.7913 mL | |
| 40 mM | 0.0837 mL | 0.4187 mL | 0.8374 mL | 2.0935 mL | |
| 50 mM | 0.0670 mL | 0.3350 mL | 0.6699 mL | 1.6748 mL | |
| 60 mM | 0.0558 mL | 0.2791 mL | 0.5583 mL | 1.3956 mL |