EB1002
Based on 1 Customer Validation
EB1002 is a highly selective, long-acting NK2R agonist. EB1002 exerts central appetite suppression, increases peripheral energy expenditure and enhances insulin sensitivity, which effectively reduces body weight, improves glucose and lipid metabolism, with favorable safety profiles. EB1002 can be used for research on diseases such as obesity and type 2 diabetes.
연구목적의 판매만을 진행합니다. 환자를 대상으로 한 판매는 하지 않습니다.
- Purity: 99.98%
- CAS No.: 2770688-48-5
- 화학식: C73H124N12O23
- 분자량:1537.83
-
보관:
Sealed storage, away from moisture.
Powder -80°C, 2 years , -20°C, 1 year* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Biological Activity
-
Chemical Information
-
용액&용해도
- 순도&문서
- References
-
Help & FAQs
Biological Activity
|
NK2R |
EB1002 (s.c. single dose; s.c. daily, 7 days; i.c.v. single dose) reduces body weight via decreased food intake and increased energy expenditure, improves glucose metabolism, and preserves lean mass in obese Mus musculus[2]. Wait, no, the original text uses "obese mice" not the Latin name. Correcting to follow the rules strictly without altering content:\n\nEB1002 (s.c. single dose; s.c. daily, 7 days; i.c.v. single dose) reduces body weight via decreased food intake and increased energy expenditure, improves glucose metabolism, and preserves lean mass in obese mice[2].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Animal Model:C57Bl/6 NRj (male and female, ≥8 weeks old); B6.V-Lepob/JRj (ob/ob, male and female, ≥8 weeks old); B6.129S4-Mc4rtm1Lowl/J (Mc4r-knockout, ≥8 weeks old); B6N-Tacr2tm1Zpg (Nk2r-floxed, ≥8 weeks old); Ucp1-knockout (≥8 weeks old, thermoneutral housing); CD-1 mice (≥8 weeks old); diet-induced obesity model (60% HFD for ≥12 weeks)[1]
-
Dosage:40 nmol/kg; 325 nmol/kg; 2 nmol (ICV)
-
Administration:s.c. (single dose); s.c. (daily, 7/12/21 days); s.c. (every other day, 21 days); ICV (single dose, 1.5 μl artificial CSF)
-
Result:Increased oxygen consumption, fatty acid oxidation, and core temperature; reduced food intake, respiratory exchange ratio (RER), and body weight in DIO mice (single 325 nmol/kg s.c.).
Reduced body weight (solely fat mass loss, lean mass spared), improved glucose tolerance, and increased insulin sensitivity (50% higher glucose infusion rate during clamp) in DIO mice (daily 325 nmol/kg s.c. for 7 days).
Reduced food intake, body weight, and blood glucose in ob/ob mice (325 nmol/kg s.c.).
Reduced food intake and body weight but not oxygen consumption or blood glucose in ob/ob mice (ICV 2 nmol).
Abolished effects in Nk2r-knockout mice. Reduced body weight, blood glucose, RER, and increased fatty acid oxidation, oxygen consumption, and body temperature in Ucp1-knockout mice at thermoneutrality (single 325 nmol/kg s.c.) compared to vehicle and pair-fed controls.
Chemical Information
-
CAS No. 2770688-48-5
-
Appearance Solid
-
분자량 1537.83
-
화학식 C73H124N12O23
-
Color White to off-white
-
선적
Room temperature in continental US; may vary elsewhere.
-
보관
Sealed storage, away from moisture
Powder -80°C 2 years -20°C 1 year * In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
용액&용해도
DMSO : 50 mg/mL (32.51 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
H2O : 48.78 mg/mL (31.72 mM; adjust pH to 3 with 1 M HCl)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 5 mg/mL (3.25 mM); Clear solution
This protocol yields a clear solution of ≥ 5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (50.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 5 mg/mL (3.25 mM); Clear solution
This protocol yields a clear solution of ≥ 5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (50.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Working solution concentration: 0.22 mg/mL
This product has good water solubility, please refer to the measured solubility data in water/PBS/Saline for details.
순도&문서
-
Data Sheet (277 KB)
-
SDS (252 KB)
- English - EN (252 KB)
- Français - FR (252 KB)
- Deutsch - DE (252 KB)
- Norwegian - NO (252 KB)
- Español - ES (252 KB)
- Swedish - SV (252 KB)
- Italian - IT (252 KB)
- Korean - KR (252 KB)
- Portuguese - PT (252 KB)
-
Handling Instructions (2659 KB)
References
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| H2O / DMSO | 1 mM | 0.6503 mL | 3.2513 mL | 6.5027 mL | 16.2567 mL |
| 5 mM | 0.1301 mL | 0.6503 mL | 1.3005 mL | 3.2513 mL | |
| 10 mM | 0.0650 mL | 0.3251 mL | 0.6503 mL | 1.6257 mL | |
| 15 mM | 0.0434 mL | 0.2168 mL | 0.4335 mL | 1.0838 mL | |
| 20 mM | 0.0325 mL | 0.1626 mL | 0.3251 mL | 0.8128 mL | |
| 25 mM | 0.0260 mL | 0.1301 mL | 0.2601 mL | 0.6503 mL | |
| 30 mM | 0.0217 mL | 0.1084 mL | 0.2168 mL | 0.5419 mL |
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.
EB1002 Related Classifications
HY-P10746 Related Classifications
Powered by Bioz