Osilodrostat phosphate
Based on 4 publication(s) in Google Scholar
Osilodrostat (LCI699) phosphate is a potent, orally active11β-hydroxylase (CYP11B1) inhibitor with an IC50 value of 35 nM. Osilodrostat phosphate is a potent, orally aldosterone synthase (CYP11B2) inhibitor with IC50 values of 0.7 nM and 160 nM for human aldosterone synthase and rat aldosterone synthase, respectively. Osilodrostat phosphate inhibits aldosterone and corticosterone synthesis. Osilodrostat phosphate has blood pressure lowering ability. Osilodrostat phosphate can be used for research of Cushing syndrome (CS).
연구목적의 판매만을 진행합니다. 환자를 대상으로 한 판매는 하지 않습니다.
- Purity: 98.83%
- CAS No.: 1315449-72-9
- 화학식: C13H13FN3O4P
- 분자량:325.23
-
보관:
4°C, sealed storage, away from moisture
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Biological Activity
-
Chemical Information
-
용액&용해도
- 순도&문서
- References
-
Help & FAQs
-
Metabolism/Protease Compound Library
HY-L012
-
FDA-Approved Drug Library
HY-L022
-
Anti-Cancer Compound Library
HY-L025
-
Drug Repurposing Compound Library
HY-L035
-
Anti-Cardiovascular Disease Compound Library
HY-L046
-
Orally Active Compound Library
HY-L061
-
FDA Approved & Pharmacopeial Drug Library
HY-L066
-
Drug-Induced Liver Injury (DILI) Compound Library
HY-L076
-
Anti-Cancer Metabolism Compound Library
HY-L083
-
Rare Diseases Drug Library
HY-L102
-
EMA-Approved Drug Library
HY-L116
-
FDA-Approved Anticancer Drug Library
HY-L122
-
Nuclear Receptor Compound Library
HY-L126
-
Metabolic Enzyme Compound Library
HY-L146
-
Bioactive Compound Library Max
HY-L181
-
MCE Bioactive Compound Library
HY-L001V
-
Drug Repurposing Compound Library Plus
HY-L035P
-
FDA-Approved Drug Library Plus
HY-L022P
-
FDA-Approved Drug Library Mini
HY-L022M
-
Bioactive Compound Library
HY-L001
-
High-Throughput Bioactive Compound Library
HY-L205
Publications Citing Use of MedChemExpress (MCE) Osilodrostat phosphate
More
Biological Activity
IC50: 35 nM (CYP11B1), 0.7 nM (human aldosterone synthase), and 160 nM (rat aldosterone synthase)[1][2]
Osilodrostat (LCI699; 0.01-10 μM; HAC15 cells, 17 primary human adrenocortical cell cultures, and pituitary adenoma cells) phosphate inhibits cortisol and aldosterone. Osilodrostat results in inhibition of corticosterone, 11-deoxycortisol accumulation, and modest effects on adrenal androgens[2].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Osilodrostat (LCI699; 3-100 mg/kg; p.o.; daily, for 52 weeks) phosphate reduces mean arterial pressure and prolongs survival in dTG rats[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Animal Model:Male Ang-II- and ACTH-stimulated Sprague Dawley rats[1]
-
Dosage:0.1, 0.3, 1 and 3 mg/kg (Ang-II-stimulated rats) and 1, 3, 10, 30 and 100 mg/kg (ACTH-stimulated rats)
-
Administration:Oral administration; once
-
Result:Inhibited the increase in plasma aldosterone concentrations stimulated by Ang II or ACTH in a dose-dependent manner.
-
Animal Model:dTG rats[1]
-
Dosage:3, 10, 30 and 100 mg/kg
-
Administration:Oral administration; daily, for 52 weeks
-
Result:Increased fractional LV (systolic and diastolic) shortening, normalized LV isovolumic relaxation time to RR (IVRT/RR) ratio and myocardial cell size and reduced LV weight in a dose-dependent manner.
| NCT Number | Sponsor | Condition | Start Date |
Phase
|
|---|---|---|---|---|
| NCT01329991 | Plexxikon| | 2011-05 | PHASE1 |
Chemical Information
-
CAS No. 1315449-72-9
-
Appearance Solid
-
분자량 325.23
-
화학식 C13H13FN3O4P
-
Color White to off-white
-
SMILES
N#CC1=CC=C([C@H]2CCC3=CN=CN32)C(F)=C1.O=P(O)(O)O
-
Synonyms
LCI699 phosphate
-
선적
Room temperature in continental US; may vary elsewhere.
-
보관
4°C, sealed storage, away from moisture
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
Publications (4)
-
Journal Impact Factor
-
Most Recent
-
Acta Pharm Sin B
Atractylenolide-I covalently binds to CYP11B2, selectively inhibits aldosterone synthesis, and improves hyperaldosteronism. [Abstract]2022 Jan;12(1):135-148. PMID: 35127376 -
BMC Med
The effects of selected inhibitors on human fetal adrenal steroidogenesis differs under basal and ACTH-stimulated conditions. [Abstract]2021 Sep 8;19(1):204. PMID: 34493283 -
Toxicol Appl Pharmacol
In silico and in vitro assessment of drugs potentially causing adverse effects by inhibiting CYP17A1. [Abstract]2024 May:486:116945. PMID: 38688424 -
J Pharm Biomed Anal
LC-MS/MS method for simultaneous quantification of osilodrostat and metyrapone in human plasma from patients treated for Cushing's Syndrome. [Abstract]2023 May 10:228:115316. PMID: 36868030
용액&용해도
H2O : ≥ 200 mg/mL (614.95 mM)
DMSO : 100 mg/mL (307.47 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
* "≥" means soluble, but saturation unknown.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (7.69 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.5 mg/mL (7.69 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Working solution concentration: 0.22 mg/mL
This product has good water solubility, please refer to the measured solubility data in water/PBS/Saline for details.
순도&문서
-
Data Sheet (282 KB)
-
SDS (393 KB)
- English - EN (393 KB)
- Français - FR (393 KB)
- Deutsch - DE (393 KB)
- Norwegian - NO (393 KB)
- Español - ES (393 KB)
- Swedish - SV (393 KB)
- Italian - IT (393 KB)
- Korean - KR (393 KB)
- Portuguese - PT (393 KB)
-
Handling Instructions (2659 KB)
References
[1]. Ménard J, et, al. Aldosterone synthase inhibition: cardiorenal protection in animal disease models and translation of hormonal effects to human subjects. J Transl Med. 2014 Dec 10;12:340. [Content Brief]
[2]. Creemers SG, et, al. Osilodrostat Is a Potential Novel Steroidogenesis Inhibitor for the Treatment of Cushing Syndrome: An In Vitro Study. J Clin Endocrinol Metab. 2019 Aug 1;104(8):3437-3449. [Content Brief]
[3]. Li L, et, al. Osilodrostat (LCI699), a potent 11β-hydroxylase inhibitor, administered in combination with the multireceptor-targeted somatostatin analog pasireotide: A 13-week study in rats. Toxicol Appl Pharmacol. 2015 Aug 1;286(3):224-33. [Content Brief]
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO / H2O | 1 mM | 3.0747 mL | 15.3737 mL | 30.7475 mL | 76.8687 mL |
| 5 mM | 0.6149 mL | 3.0747 mL | 6.1495 mL | 15.3737 mL | |
| 10 mM | 0.3075 mL | 1.5374 mL | 3.0747 mL | 7.6869 mL | |
| 15 mM | 0.2050 mL | 1.0249 mL | 2.0498 mL | 5.1246 mL | |
| 20 mM | 0.1537 mL | 0.7687 mL | 1.5374 mL | 3.8434 mL | |
| 25 mM | 0.1230 mL | 0.6149 mL | 1.2299 mL | 3.0747 mL | |
| 30 mM | 0.1025 mL | 0.5125 mL | 1.0249 mL | 2.5623 mL | |
| 40 mM | 0.0769 mL | 0.3843 mL | 0.7687 mL | 1.9217 mL | |
| 50 mM | 0.0615 mL | 0.3075 mL | 0.6149 mL | 1.5374 mL | |
| 60 mM | 0.0512 mL | 0.2562 mL | 0.5125 mL | 1.2811 mL | |
| 80 mM | 0.0384 mL | 0.1922 mL | 0.3843 mL | 0.9609 mL | |
| 100 mM | 0.0307 mL | 0.1537 mL | 0.3075 mL | 0.7687 mL |
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.
Osilodrostat phosphate Related Classifications
HY-16276A Related Classifications
Powered by Bioz