Methyl elaidate
Based on 1 Customer Validation
Methyl elaidate is a compound belonging to the class of fatty acid esters. It is derived from elaidic acid, a monounsaturated omega-9 fatty acid found in certain vegetable oils and animal fats. Methyl elaidate is commonly used as a reference compound for the analysis of fatty acids and their derivatives by gas chromatography.
For research use only. We do not sell to patients.
- Purity: 99.22%
- CAS No.: 1937-62-8
- Formula: C19H36O2
- Molecular Weight:296.49
-
Storage:
4°C, stored under nitrogen
* In solvent : -80°C, 6 months; -20°C, 1 month (stored under nitrogen)
-
Biological Activity
-
Chemical Information
-
Solvent & Solubility
- Purity & Documentation
-
Help & FAQs
Biological Activity
Methyl elaidate is a biochemical reagent that can be used as a biological material or organic compound for life science related research.
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Chemical Information
-
CAS No. 1937-62-8
-
Appearance Liquid
-
Molecular Weight 296.49
-
Formula C19H36O2
-
Color Colorless to light yellow
-
SMILES
CCCCCCCC/C=C/CCCCCCCC(OC)=O
-
Synonyms
Methyl trans-9-Octadecenoate; (E)-Methyl octadec-9-enoate
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
4°C, stored under nitrogen
* In solvent : -80°C, 6 months; -20°C, 1 month (stored under nitrogen)
Solvent & Solubility
DMSO : 100 mg/mL (337.28 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (stored under nitrogen). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (stored under nitrogen). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL. * In solvent : -80°C, 6 months; -20°C, 1 month (stored under nitrogen)
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Purity & Documentation
-
Data Sheet (237 KB)
-
SDS (913 KB)
- English - EN (913 KB)
- Français - FR (913 KB)
- Deutsch - DE (913 KB)
- Norwegian - NO (913 KB)
- Español - ES (913 KB)
- Swedish - SV (913 KB)
- Italian - IT (913 KB)
- Portuguese - PT (913 KB)
-
Handling Instructions (2659 KB)
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (stored under nitrogen). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 3.3728 mL | 16.8640 mL | 33.7280 mL | 84.3199 mL |
| 5 mM | 0.6746 mL | 3.3728 mL | 6.7456 mL | 16.8640 mL | |
| 10 mM | 0.3373 mL | 1.6864 mL | 3.3728 mL | 8.4320 mL | |
| 15 mM | 0.2249 mL | 1.1243 mL | 2.2485 mL | 5.6213 mL | |
| 20 mM | 0.1686 mL | 0.8432 mL | 1.6864 mL | 4.2160 mL | |
| 25 mM | 0.1349 mL | 0.6746 mL | 1.3491 mL | 3.3728 mL | |
| 30 mM | 0.1124 mL | 0.5621 mL | 1.1243 mL | 2.8107 mL | |
| 40 mM | 0.0843 mL | 0.4216 mL | 0.8432 mL | 2.1080 mL | |
| 50 mM | 0.0675 mL | 0.3373 mL | 0.6746 mL | 1.6864 mL | |
| 60 mM | 0.0562 mL | 0.2811 mL | 0.5621 mL | 1.4053 mL | |
| 80 mM | 0.0422 mL | 0.2108 mL | 0.4216 mL | 1.0540 mL | |
| 100 mM | 0.0337 mL | 0.1686 mL | 0.3373 mL | 0.8432 mL |
Powered by Bioz