MMAE-SMCC
Based on 1 Customer Validation
MMAE-SMCC is a agent-linker conjugate for ADC. MMAE-SMCC is composed of a potent mitotic and a tubulin inhibitor MMAE and a linker SMCC to make antibody agent conjugate.
Nos produits utilisent uniquement pour la recherche. Nous ne vendons pas aux patients.
- Pureté: 95.65%
- CAS No.: 2021179-11-1
- Formule: C58H89N7O14S
- Masse moléculaire:1140.43
-
Stockage:
-20°C, protect from light, stored under nitrogen
* The compound is unstable in solutions, freshly prepared is recommended.
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Activité biologique
-
Chemical Information
-
Solvant et solubilité
- Pureté et documentation
- Références
-
Help & FAQs
Voir tous les produits spécifiques à Isoform Drug-Linker Conjugates for ADC
More
Activité biologique
|
Auristatin |
ADCs are comprised of an antibody to which is attached an ADC cytotoxin through an ADC linker.
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Chemical Information
-
CAS No. 2021179-11-1
-
Appearance Solid
-
Masse moléculaire 1140.43
-
Formule C58H89N7O14S
-
Color White to off-white
-
SMILES
O[C@@H](C1=CC=CC=C1)[C@@H](C)NC([C@H](C)[C@H]([C@@]2([H])N(CCC2)C(C[C@@H](OC)[C@@]([C@@H](C)CC)([H])N(C)C([C@H](C(C)C)NC([C@H](C(C)C)N(C)C(CCSC(C3)C(N(CC4CCC(C(ON5C(CCC5=O)=O)=O)CC4)C3=O)=O)=O)=O)=O)=O)OC)=O
-
Livraison
Room temperature in continental US; may vary elsewhere.
-
Stockage
-20°C, protect from light, stored under nitrogen
* The compound is unstable in solutions, freshly prepared is recommended.
Solvant et solubilité
DMSO : 100 mg/mL (87.69 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. The compound is unstable in solutions, freshly prepared is recommended.
Please refer to the solubility information to select the appropriate solvent. The compound is unstable in solutions, freshly prepared is recommended.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 3.75 mg/mL (3.29 mM); Clear solution
This protocol yields a clear solution of ≥ 3.75 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (37.5 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 3.75 mg/mL (3.29 mM); Clear solution
This protocol yields a clear solution of ≥ 3.75 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (37.5 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL. * The compound is unstable in solutions, freshly prepared is recommended.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Pureté et documentation
-
Fiche technique (271 KB)
-
SDS (252 KB)
- English - EN (252 KB)
- Français - FR (252 KB)
- Deutsch - DE (252 KB)
- Norwegian - NO (252 KB)
- Español - ES (252 KB)
- Swedish - SV (252 KB)
- Italian - IT (252 KB)
- Korean - KR (252 KB)
- Portuguese - PT (252 KB)
-
Instruction de manipulation (2659 KB)
Références
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. The compound is unstable in solutions, freshly prepared is recommended.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 0.8769 mL | 4.3843 mL | 8.7686 mL | 21.9216 mL |
| 5 mM | 0.1754 mL | 0.8769 mL | 1.7537 mL | 4.3843 mL | |
| 10 mM | 0.0877 mL | 0.4384 mL | 0.8769 mL | 2.1922 mL | |
| 15 mM | 0.0585 mL | 0.2923 mL | 0.5846 mL | 1.4614 mL | |
| 20 mM | 0.0438 mL | 0.2192 mL | 0.4384 mL | 1.0961 mL | |
| 25 mM | 0.0351 mL | 0.1754 mL | 0.3507 mL | 0.8769 mL | |
| 30 mM | 0.0292 mL | 0.1461 mL | 0.2923 mL | 0.7307 mL | |
| 40 mM | 0.0219 mL | 0.1096 mL | 0.2192 mL | 0.5480 mL | |
| 50 mM | 0.0175 mL | 0.0877 mL | 0.1754 mL | 0.4384 mL | |
| 60 mM | 0.0146 mL | 0.0731 mL | 0.1461 mL | 0.3654 mL | |
| 80 mM | 0.0110 mL | 0.0548 mL | 0.1096 mL | 0.2740 mL |
MMAE-SMCC Related Classifications
HY-135660 Related Classifications
Powered by Bioz