MS48107
Based on 2 publication(s) in Google Scholar
MS48107 is a potent and selective positive allosteric modulator of G protein-coupled receptor 68 (GPR68). MS48107 is selective for GPR68 over the closely related proton GPCRs, neurotransmitter transporters, and hERG ion channels. MS48107 can readily cross the blood-brain barrier (BBB) in mice.
For research use only. We do not sell to patients.
- Purity: 99.90%
- CAS No.: 2375070-79-2
- Formula: C23H20FN5O2
- Molecular Weight:417.44
-
Storage:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 6 months , -20°C, 1 month
-
Biological Activity
-
Chemical Information
-
Solvent & Solubility
- Purity & Documentation
- References
-
Help & FAQs
-
GPCR/G Protein Compound Library
HY-L006
-
Lipid Metabolism Compound Library
HY-L091
-
Targeted Diversity Library
HY-L099
-
Membrane Protein-targeted Compound Library
HY-L149
-
Membrane Receptor-targeted Compound Library
HY-L150
-
Allosteric Modulators (AMs) Compound Library
HY-L170
-
Bioactive Compound Library Max
HY-L181
-
MCE Bioactive Compound Library
HY-L001V
-
Bioactive Compound Library
HY-L001
-
High-Throughput Bioactive Compound Library
HY-L205
-
Lactylation Compound Library
HY-L249
Publications Citing Use of MedChemExpress (MCE) MS48107
More
Biological Activity
|
5-HT2B Receptor |
5-HT2B has moderate binding affinity to MS48107 (compound 71) with a Ki value of 219 nM. At 5-HT2B receptors, MS48107 shows no agonist activity but display weak antagonist activity with a Ki value of 310 nM, respectively[1].
MS48107 (compound 71) has agonist activity only at the MT1 and MT2 receptors. MS48107 is a weak full agonist at the MT1 receptor (EC50 = 320 nM) and a weak partial agonist activity at the MT2 receptor (EC50 = 540 nM). MS48107 displays low binding affinities to MT1 (5900 nM) and MT2 (1100 nM) receptors[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Chemical Information
-
CAS No. 2375070-79-2
-
Appearance Solid
-
Molecular Weight 417.44
-
Formula C23H20FN5O2
-
Color White to off-white
-
SMILES
OCC1=CC=CC(F)=C1C2=NC(N)=NC(NCC3=CC=C(OC4=CC=CC=C4)C=C3)=N2
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
Publications (2)
-
Journal Impact Factor
-
Most Recent
-
Adv Sci (Weinh)
Endothelial GPR68 Is Essential for Arteriogenesis and Represents a Therapeutic Target in a Model of Peripheral Artery Disease. [Abstract]2026 Mar 20:e20244. PMID: 41858272 -
Inflammation
Pharmacological Activation of GPR68 Attenuates Ferroptosis in Spinal Cord Ischemia/Reperfusion Injury Through PI3K/Akt-Mediated Nrf2 Antioxidant Pathway. [Abstract]2025 Jun 18. PMID: 40528120
Solvent & Solubility
DMSO : 100 mg/mL (239.56 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (5.99 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.5 mg/mL (5.99 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Purity & Documentation
-
Data Sheet (274 KB)
-
SDS (393 KB)
- English - EN (393 KB)
- Français - FR (393 KB)
- Deutsch - DE (393 KB)
- Norwegian - NO (393 KB)
- Español - ES (393 KB)
- Swedish - SV (393 KB)
- Italian - IT (393 KB)
- Portuguese - PT (393 KB)
-
Handling Instructions (2659 KB)
References
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.3956 mL | 11.9778 mL | 23.9555 mL | 59.8888 mL |
| 5 mM | 0.4791 mL | 2.3956 mL | 4.7911 mL | 11.9778 mL | |
| 10 mM | 0.2396 mL | 1.1978 mL | 2.3956 mL | 5.9889 mL | |
| 15 mM | 0.1597 mL | 0.7985 mL | 1.5970 mL | 3.9926 mL | |
| 20 mM | 0.1198 mL | 0.5989 mL | 1.1978 mL | 2.9944 mL | |
| 25 mM | 0.0958 mL | 0.4791 mL | 0.9582 mL | 2.3956 mL | |
| 30 mM | 0.0799 mL | 0.3993 mL | 0.7985 mL | 1.9963 mL | |
| 40 mM | 0.0599 mL | 0.2994 mL | 0.5989 mL | 1.4972 mL | |
| 50 mM | 0.0479 mL | 0.2396 mL | 0.4791 mL | 1.1978 mL | |
| 60 mM | 0.0399 mL | 0.1996 mL | 0.3993 mL | 0.9981 mL | |
| 80 mM | 0.0299 mL | 0.1497 mL | 0.2994 mL | 0.7486 mL | |
| 100 mM | 0.0240 mL | 0.1198 mL | 0.2396 mL | 0.5989 mL |
Powered by Bioz