Nampt-IN-20
Based on 1 Customer Validation
Nampt-IN-20 is a nicotinamide phosphoribosyltransferase (Nampt) inhibitor with a IC50 of 9.0 nM. Nampt-IN-20 binds to the active site of Nampt, occupies the NAM-binding region and disrupts NAD biosynthesis. Nampt-IN-20 exerts antiproliferative effects in A2780 ovarian cancer cells. Nampt-IN-20 can be used for the research of ovarian cancer.
商品は「研究用試薬」です。人や動物の医療用・臨床診断用・食品用の製品ではありません。
研究用途以外に使用した場合、当社は一切の責任を負いかねます。
- 純度 : 95.93%
- CAS 番号: 1362150-16-0
- 分子式: C21H17N3O3S
- 分子量:391.45
-
保管条件:Powder -20°C, 3 years ; In solvent -80°C, 6 months , -20°C, 1 month
生物活性
製品説明
Cellular Effect
|
Cell Line
|
Type | Value | Description | References |
|---|---|---|---|---|
| A2780 | IC50 |
0.018 μM
Compound: 6
|
Cytotoxicity against human A2780 cells after 72 hrs by sulforhodamine B assay
Cytotoxicity against human A2780 cells after 72 hrs by sulforhodamine B assay
|
[PMID: 23899614] |
| A2780 | IC50 |
0.018 μM
Compound: 8
|
Antiproliferative activity against human A2780 cells assessed as growth inhibition after 72 hrs by SRB-based microplate reader analysis
Antiproliferative activity against human A2780 cells assessed as growth inhibition after 72 hrs by SRB-based microplate reader analysis
|
[PMID: 23859118] |
| A2780 | IC50 |
18 nM
Compound: 4
|
Antiproliferative activity against human A2780 cells after 72 hrs by sulforhodamine B assay
Antiproliferative activity against human A2780 cells after 72 hrs by sulforhodamine B assay
|
[PMID: 24279990] |
体外実験
Nampt-IN-20 (compound 7) potently inhibits purified Nampt protein with an IC50 of 9.0 nM[1].
Nampt-IN-20 potently inhibits A2780 ovarian cancer cell proliferation with an IC50 of 0.010 μM[1].
Nampt-IN-20 (30 minutes) shows low stability in mouse liver microsomes, with only 1.9% remaining after 30 minutes[1].
Nampt-IN-20 (30 minutes) shows moderate stability in human liver microsomes, with 44% remaining after 30 minutes[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only. Further protocols information, click here.
化学情報
-
CAS 番号 1362150-16-0
-
性状 Solid
-
分子量 391.45
-
分子式 C21H17N3O3S
-
Color Off-white to pink
-
SMILES
O=C(NCC1=CC=C(C=C1)S(=O)(=O)C=2C=CC=CC2)C3=CC=4C=NC=CC4N3
-
輸送条件
Room temperature in continental US; may vary elsewhere.
-
保管条件
Powder -20°C 3 years In solvent -80°C 6 months -20°C 1 month
溶剤 & 溶解度
体外:
DMSO : 50 mg/mL (127.73 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
濃度 (開始) × 体積 (開始) = 濃度 (終了) × 体積 (終了)
体内:
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 1.25 mg/mL (3.19 mM); Clear solution
This protocol yields a clear solution of ≥ 1.25 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (12.5 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 1.25 mg/mL (3.19 mM); Clear solution
This protocol yields a clear solution of ≥ 1.25 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (12.5 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
In Vivo Dissolution Calculator
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
プロトコル
-
Cell Cytotoxicity Assay
Cytotoxicity assays are usually based on the assessment of cell membrane damage, which can also be indirectly detected by measuring cell viability. Detection methods include MTT assay, CKK-8 assay, LDH assay and ATP assay, etc.
-
Cell Viability Determination by MTT Colorimetric Assay
The following protocol uses the MTT colorimetric assay as a classic literature-established method for assessing cell viability/metabolic activity in cultured mammalian cells. MTT[3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide] is reduced by metabolically active cells to a colored formazan product; the amount of formazan is quantified spectrophotometrically and provides an indirect measure of metabolically active viable cells. Importantly, MTT reduction reflects cellular oxidoreductase/metabolic activity rather than an absolute direct count of living cells, so changes in cellular metabolism can alter the signal independently of cell number.
純度とドキュメンテーション
-
データシート (274 KB)
-
SDS (252 KB)
- English - EN (252 KB)
- Français - FR (252 KB)
- Deutsch - DE (252 KB)
- Norwegian - NO (252 KB)
- Español - ES (252 KB)
- Swedish - SV (252 KB)
- Italian - IT (252 KB)
- Korean - KR (252 KB)
- Portuguese - PT (252 KB)
-
取扱説明書 (2659 KB)
参考文献
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.5546 mL | 12.7730 mL | 25.5460 mL | 63.8651 mL |
| 5 mM | 0.5109 mL | 2.5546 mL | 5.1092 mL | 12.7730 mL | |
| 10 mM | 0.2555 mL | 1.2773 mL | 2.5546 mL | 6.3865 mL | |
| 15 mM | 0.1703 mL | 0.8515 mL | 1.7031 mL | 4.2577 mL | |
| 20 mM | 0.1277 mL | 0.6387 mL | 1.2773 mL | 3.1933 mL | |
| 25 mM | 0.1022 mL | 0.5109 mL | 1.0218 mL | 2.5546 mL | |
| 30 mM | 0.0852 mL | 0.4258 mL | 0.8515 mL | 2.1288 mL | |
| 40 mM | 0.0639 mL | 0.3193 mL | 0.6387 mL | 1.5966 mL | |
| 50 mM | 0.0511 mL | 0.2555 mL | 0.5109 mL | 1.2773 mL | |
| 60 mM | 0.0426 mL | 0.2129 mL | 0.4258 mL | 1.0644 mL | |
| 80 mM | 0.0319 mL | 0.1597 mL | 0.3193 mL | 0.7983 mL | |
| 100 mM | 0.0255 mL | 0.1277 mL | 0.2555 mL | 0.6387 mL |