Pifusertib
Based on 1 Customer Validation
Pifusertib (TAS-117) is a potent, selective, orally active allosteric Akt inhibitor (with IC50s of 4.8, 1.6, and 44 nM for Akt1, 2, and 3, respectively). Pifusertib triggers anti-myeloma activities and enhances fatal endoplasmic reticulum (ER) stress induced by proteasome inhibition. Pifusertib induces apoptosis and autophagy.
For research use only. We do not sell to patients.
- Purity : 99.81%
- CAS No.: 1402602-94-1
- Formula: C26H24N4O2
- Molecular Weight:424.49
-
Storage:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 6 months , -20°C, 1 month
Biological Activity
Description
IC50 & Target
[1]|
Akt1 4.8 nM (IC50) |
Akt2 1.6 nM (IC50) |
Akt3 44 nM (IC50) |
In Vitro
Pifusertib (1 μM; 6 hours) blocks basal phosphorylation of Akt and downstream p-FKHR/FKHRL1 in MM cells with high baseline p-Akt[1].
Pifusertib (0-10 μM; 72 hours) selectively inhibits Akt and induces cytotoxicity in MM cells with high baseline phosphorylation of Akt[1].
Pifusertib abrogates the cytoprotective effect of the bone marrow microenvironment associated with Akt inhibition in both MM cells and BMSCs. Pifusertib enhances Carfilzomib-induced cytotoxicity and fatal ER stress in MM cells. Pifusertib (0.5, 1 μM) triggers G0/G1 arrest followed by apoptosis, associated with induction of autophagy and endoplasmic reticulum stress response[1].
Pifusertib enhances bortezomib-induced cytotoxicity, associated with increased CHOP (a fatal ER-stress marker) and PARP cleavage and blockade of bortezomib-induced p-Akt, suggesting that Pifusertib augments Bortezomib-induced ER stress and apoptotic signaling[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only. Further protocols information, click here.
-
Cell Line:MM cell lines
-
Concentration:0-10 μM
-
Incubation Time:72 hours
-
Result:Induced significant growth inhibition in MM cell lines with high baseline p-Akt, but not in cell lines with low baseline p-Akt.
-
Cell Line:MM cell lines
-
Concentration:0-10 μM
-
Incubation Time:72 hours
-
Result:Blocked basal phosphorylation of Akt and downstream p-FKHR/FKHRL1 in MM cells with high baseline p-Akt, but did not inhibit autophosphorylation of PDK1 which phosphorylates Akt at Thr308.
In Vivo
Pifusertib enhances bortezomib-induced MM cytotoxicity in vivo[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Animal Model:SCID mice (xenograft models bearing MM.1S cells)[1]
-
Dosage:12, 16 mg/kg
-
Administration:P.o.; daily for 5 days a week, 21 days
-
Result:Significantly reduced MM.1S tumor growth versus vehicle control.
Clinical Trial
| NCT Number | Sponsor | Condition | Start Date |
Phase
|
|---|---|---|---|---|
| NCT01329991 | Plexxikon| | 2011-05 | PHASE1 |
Chemical Information
-
CAS No. 1402602-94-1
-
Appearance Solid
-
Molecular Weight 424.49
-
Formula C26H24N4O2
-
Color Off-white to light yellow
-
SMILES
C[C@@](C1)(O)C[C@]1(N)C2=CC=C(C3=C(N(COC4=CC=NC=C45)C5=N3)C6=CC=CC=C6)C=C2
-
Synonyms
TAS-117
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
Solvent & Solubility
In Vitro:
DMSO : 50 mg/mL (117.79 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Protocols
-
Apoptosis
Apoptosis, also called programmed cell death, is generally characterized by distinct morphological characteristics.
-
TUNEL staining for apoptotic DNA fragmentation
TUNEL staining detects DNA strand breaks by using terminal deoxynucleotidyl transferase to add labeled nucleotides to exposed 3′-OH DNA termini, generating either microscopic staining in fixed cells or tissue sections, or fluorescence/cytometric signal in cell suspensions. TUNEL positivity reflects DNA fragmentation but should not be interpreted alone as definitive apoptosis, because TUNEL can also label necrotic, autolytic, mechanically damaged, or DNA-repair-associated DNA breaks.
-
Annexin V plus membrane-impermeant dye apoptosis staining
Annexin V-based apoptosis assays rely on the detection of phosphatidylserine (PS) externalization from the inner leaflet of the plasma membrane to the outer leaflet, an early biochemical hallmark of apoptosis. Fluorescently labeled Annexin V binds PS in a calcium-dependent manner, enabling identification of early apoptotic cells by flow cytometry or fluorescence microscopy. When combined with a membrane-impermeant DNA-binding dye (e. g. , propidium iodide), this approach allows discrimination between viable (Annexin V−/dye−), early apoptotic (Annexin V+/dye−), and late apoptotic or necrotic (Annexin V+/dye+) cell populations by assessing membrane integrity and PS exposure.
-
Autophagy
Autophagy is a process in which eukaryotic cells use lysosomes to degrade their own cytoplasmic proteins and damaged organelles under the regulation of autophagy related gene (Atg). Microtubule-associated proteins light chain 3 (LC3) is recognized as autophagy marker, which transfers from cytoplasmic LC3 (LC3-I) to membrane type (LC3-II). LC3-II/I ratio could be detected by Western Blot and fluorescence microscopy.
-
Apoptosis Solutions
Apoptosis is a regulated, generally non-lytic cell-death pathway that removes unwanted, damaged, infected, or abnormal cells through coordinated morphological changes, caspase activation, DNA fragmentation, and membrane remodeling. The intrinsic apoptosis pathway is controlled mainly by mitochondrial outer membrane permeabilization, BCL-2 family proteins, cytochrome c release, apoptosome formation, caspase-9 activation, and downstream executioner caspase-3/7 activation. The extrinsic apoptosis pathway is initiated by death receptors such as Fas, TNFR, and TRAIL receptors, which recruit adaptor proteins and activate caspase-8 before engaging executioner caspases or mitochondrial amplification through BID cleavage. Apoptosis is linked to many phenotypes, including cancer cell killing, tissue homeostasis, immune regulation, neurodegeneration, infection response, and treatment-induced cytotoxicity; unresolved questions include how apoptosis interacts with necroptosis, pyroptosis, ferroptos
-
Lysosome and acidic-vesicle live-cell staining
Lysosome and acidic-vesicle live-cell staining detects acidic intracellular compartments by using membrane-permeant acidotropic probes that accumulate in low-pH vesicles, including lysosomes, late endosomes, autolysosomes, and acidic phagosomes. LysoTracker staining is commonly used as an intensity-based readout of acidic lysosomal compartment abundance or enlargement, while acridine orange produces green fluorescence in less concentrated compartments and red fluorescence after concentration-dependent accumulation in acidic vesicular organelles. Loss or reduction of acridine-orange red signal can be used as a readout of lysosomal membrane permeabilization or reduced acidic-vesicle integrity. This protocol is designed for live cultured cells and can be adapted for fluorescence microscopy, high-content imaging, plate-reader readout, or flow cytometry when the selected literature supports the readout. Because these dyes report acidotropic accumulation rather than lysosome identity alone,
-
Macroautophagy Solutions
Macroautophagy is a conserved lysosome-dependent degradation pathway in which cytoplasmic material is sequestered into double-membrane autophagosomes and delivered to lysosomes for degradation and recycling. The pathway supports cellular homeostasis during nutrient limitation, organelle stress, protein-aggregate accumulation, infection, differentiation, and tissue remodeling by coupling cargo sequestration, autophagosome maturation, lysosomal fusion, and degradation of cargo-derived macromolecules. The core molecular sequence includes initiation by nutrient- and stress-regulated autophagy machinery, autophagosome nucleation, LC3/ATG8-family conjugation to autophagosomal membranes, cargo selection through receptors such as SQSTM1/p62, autophagosome-lysosome fusion, and lysosomal degradation. LC3 was identified as a mammalian homolog of yeast Atg8 that localizes to autophagosomal membranes after processing, and p62/SQSTM1 was shown to connect ubiquitinated cargo with autophagic degradati
Purity & Documentation
-
Data Sheet (275 KB)
-
SDS (251 KB)
- English - EN (251 KB)
- Français - FR (251 KB)
- Deutsch - DE (251 KB)
- Norwegian - NO (251 KB)
- Español - ES (251 KB)
- Swedish - SV (251 KB)
- Italian - IT (251 KB)
- Korean - KR (251 KB)
- Portuguese - PT (251 KB)
-
Handling Instructions (2659 KB)
References
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.3558 mL | 11.7788 mL | 23.5577 mL | 58.8942 mL |
| 5 mM | 0.4712 mL | 2.3558 mL | 4.7115 mL | 11.7788 mL | |
| 10 mM | 0.2356 mL | 1.1779 mL | 2.3558 mL | 5.8894 mL | |
| 15 mM | 0.1571 mL | 0.7853 mL | 1.5705 mL | 3.9263 mL | |
| 20 mM | 0.1178 mL | 0.5889 mL | 1.1779 mL | 2.9447 mL | |
| 25 mM | 0.0942 mL | 0.4712 mL | 0.9423 mL | 2.3558 mL | |
| 30 mM | 0.0785 mL | 0.3926 mL | 0.7853 mL | 1.9631 mL | |
| 40 mM | 0.0589 mL | 0.2945 mL | 0.5889 mL | 1.4724 mL | |
| 50 mM | 0.0471 mL | 0.2356 mL | 0.4712 mL | 1.1779 mL | |
| 60 mM | 0.0393 mL | 0.1963 mL | 0.3926 mL | 0.9816 mL | |
| 80 mM | 0.0294 mL | 0.1472 mL | 0.2945 mL | 0.7362 mL | |
| 100 mM | 0.0236 mL | 0.1178 mL | 0.2356 mL | 0.5889 mL |