(±)-Coniine
Based on 1 Customer Validation
(±)-Coniine (2-Propylpiperidine) is a piperidine alkaloid and nAChR agonist (EC50=0.3 mM). (±)-Coniine is acutely toxic to mice with an LD50 value of 7.7 mg/kg.
For research use only. We do not sell to patients.
- Purity: 97.34%
- CAS No.: 3238-60-6
- Formula: C8H17N
- Molecular Weight:127.23
-
Storage:
-20°C, sealed storage, away from moisture and light
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light)
Biological Activity
Chemical Information
-
CAS No. 3238-60-6
-
Appearance Liquid
-
Molecular Weight 127.23
-
Formula C8H17N
-
Color Colorless to light yellow
-
SMILES
CCCC1NCCCC1
-
Synonyms
2-Propylpiperidine
-
Structure Classification
-
Initial Source
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
-20°C, sealed storage, away from moisture and light
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light)
Solvent & Solubility
DMSO : 100 mg/mL (785.98 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (19.65 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.5 mg/mL (19.65 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL. * In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light)
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Purity & Documentation
-
Data Sheet (270 KB)
-
SDS (739 KB)
- English - EN (739 KB)
- Français - FR (739 KB)
- Deutsch - DE (739 KB)
- Norwegian - NO (739 KB)
- Español - ES (739 KB)
- Swedish - SV (739 KB)
- Italian - IT (739 KB)
- Korean - KR (739 KB)
- Portuguese - PT (739 KB)
-
Handling Instructions (2659 KB)
References
[1]. Lee ST, et al. Stereoselective potencies and relative toxicities of coniine enantiomers. Chem Res Toxicol. 2008 Oct;21(10):2061-4. [Content Brief]
[2]. B T Green, et al. Complete Inhibition of Fetal Movement in the Day 40 Pregnant Goat Model by the Piperidine Alkaloid Anabasine but Not Related Alkaloids. Toxicon. 2018 Mar 15;144:61-67. [Content Brief]
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 7.8598 mL | 39.2989 mL | 78.5978 mL | 196.4945 mL |
| 5 mM | 1.5720 mL | 7.8598 mL | 15.7196 mL | 39.2989 mL | |
| 10 mM | 0.7860 mL | 3.9299 mL | 7.8598 mL | 19.6495 mL | |
| 15 mM | 0.5240 mL | 2.6199 mL | 5.2399 mL | 13.0996 mL | |
| 20 mM | 0.3930 mL | 1.9649 mL | 3.9299 mL | 9.8247 mL | |
| 25 mM | 0.3144 mL | 1.5720 mL | 3.1439 mL | 7.8598 mL | |
| 30 mM | 0.2620 mL | 1.3100 mL | 2.6199 mL | 6.5498 mL | |
| 40 mM | 0.1965 mL | 0.9825 mL | 1.9649 mL | 4.9124 mL | |
| 50 mM | 0.1572 mL | 0.7860 mL | 1.5720 mL | 3.9299 mL | |
| 60 mM | 0.1310 mL | 0.6550 mL | 1.3100 mL | 3.2749 mL | |
| 80 mM | 0.0982 mL | 0.4912 mL | 0.9825 mL | 2.4562 mL | |
| 100 mM | 0.0786 mL | 0.3930 mL | 0.7860 mL | 1.9649 mL |