Sergliflozin etabonate
Based on 1 Customer Validation
Sergliflozin etabonate (GW-869682X) is a potent and orally active sodium glucose cotransporter (SGLT2) inhibitor. Sergliflozin etabonate shows antidiabetic and antihyperglycemic effects. Sergliflozin etabonate significantly reduces non-fasting blood glucose levels in diabetic mice. Sergliflozin etabonate has the potential for the research of diabetes.
For research use only. We do not sell to patients.
- Purity: 99.64%
- CAS No.: 408504-26-7
- Formula: C23H28O9
- Molecular Weight:448.46
-
Storage:
4°C, protect from light
* In solvent : -80°C, 6 months; -20°C, 1 month (protect from light)
Biological Activity
|
SGLT2 |
|
Cell Line
|
Type | Value | Description | References |
|---|---|---|---|---|
| CHO | IC50 |
260 nM
Compound: 3
|
Inhibition of human SGLT2 expressed in CHO cells assessed as [14C]AMG uptake after 45 mins
Inhibition of human SGLT2 expressed in CHO cells assessed as [14C]AMG uptake after 45 mins
|
[PMID: 21873071] |
| CHO | IC50 |
22 μM
Compound: 3
|
Inhibition of human SGLT1 expressed in CHO cells assessed as [14C]AMG uptake after 45 mins
Inhibition of human SGLT1 expressed in CHO cells assessed as [14C]AMG uptake after 45 mins
|
[PMID: 21873071] |
| CHO-K1 | IC50 |
260 nM
Compound: 2
|
Inhibition of human SGLT2 expressed in CHO-K1 cells by [14C]AMG uptake assay
Inhibition of human SGLT2 expressed in CHO-K1 cells by [14C]AMG uptake assay
|
[PMID: 22652255] |
| CHO-K1 | IC50 |
22 μM
Compound: 2
|
Inhibition of human SGLT1 expressed in CHO-K1 cells by [14C]AMG uptake assay
Inhibition of human SGLT1 expressed in CHO-K1 cells by [14C]AMG uptake assay
|
[PMID: 22652255] |
Sergliflozin etabonate (1.7, 8.4, 45.7 mg/kg in the 0.001, 0.005, and 0.025% sergliflozin etabonate; fed; daily for 9 weeks) reduces non-fasting blood glucose level and decreases triglyceride content in the liver in a dose-dependent manner in KK-Ay mice[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Animal Model:14 weeks, Female KK-Ay mice[1]
-
Dosage:1, 3, 10, 30 mg/kg
-
Administration:Oral; once
-
Result:Significantly reduced non-fasting blood glucose level with the reduction in blood glucose level at 2 h post dosing in the 1 mg/kg group, 3 mg/kg group, 10 mg/kg group, and 30 mg/kg group was 12, 15, 28, and 39%, respectively.
-
Animal Model:4 weeks, Female KK-Ay mice[1]
-
Dosage:1.7, 8.4, 45.7 mg/kg in the 0.001, 0.005, and 0.025% sergliflozin etabonate
-
Administration:Fed, daily for 9 weeks
-
Result:Reduced non-fasting blood glucose level and decreased triglyceride content in the liver in a dose-dependent manner in diabetic control KK-Ay mice.
Chemical Information
-
CAS No. 408504-26-7
-
Appearance Solid
-
Molecular Weight 448.46
-
Formula C23H28O9
-
Color White to off-white
-
SMILES
COC(C=C1)=CC=C1CC(C=CC=C2)=C2O[C@@H]3O[C@@H]([C@H]([C@@H]([C@H]3O)O)O)COC(OCC)=O
-
Synonyms
GW-869682X
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
4°C, protect from light
* In solvent : -80°C, 6 months; -20°C, 1 month (protect from light)
Solvent & Solubility
DMSO : ≥ 100 mg/mL (222.99 mM; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
* "≥" means soluble, but saturation unknown.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 5 mg/mL (11.15 mM); Clear solution
This protocol yields a clear solution of ≥ 5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (50.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 5 mg/mL (11.15 mM); Clear solution
This protocol yields a clear solution of ≥ 5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (50.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL. * In solvent : -80°C, 6 months; -20°C, 1 month (protect from light)
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Purity & Documentation
-
Data Sheet (276 KB)
-
SDS (252 KB)
- English - EN (252 KB)
- Français - FR (252 KB)
- Deutsch - DE (252 KB)
- Norwegian - NO (252 KB)
- Español - ES (252 KB)
- Swedish - SV (252 KB)
- Italian - IT (252 KB)
- Korean - KR (252 KB)
- Portuguese - PT (252 KB)
-
Handling Instructions (2659 KB)
References
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.2299 mL | 11.1493 mL | 22.2985 mL | 55.7463 mL |
| 5 mM | 0.4460 mL | 2.2299 mL | 4.4597 mL | 11.1493 mL | |
| 10 mM | 0.2230 mL | 1.1149 mL | 2.2299 mL | 5.5746 mL | |
| 15 mM | 0.1487 mL | 0.7433 mL | 1.4866 mL | 3.7164 mL | |
| 20 mM | 0.1115 mL | 0.5575 mL | 1.1149 mL | 2.7873 mL | |
| 25 mM | 0.0892 mL | 0.4460 mL | 0.8919 mL | 2.2299 mL | |
| 30 mM | 0.0743 mL | 0.3716 mL | 0.7433 mL | 1.8582 mL | |
| 40 mM | 0.0557 mL | 0.2787 mL | 0.5575 mL | 1.3937 mL | |
| 50 mM | 0.0446 mL | 0.2230 mL | 0.4460 mL | 1.1149 mL | |
| 60 mM | 0.0372 mL | 0.1858 mL | 0.3716 mL | 0.9291 mL | |
| 80 mM | 0.0279 mL | 0.1394 mL | 0.2787 mL | 0.6968 mL | |
| 100 mM | 0.0223 mL | 0.1115 mL | 0.2230 mL | 0.5575 mL |