Stearyldiethanolamine
Based on 1 Customer Validation
Stearyldiethanolamine is a typical amine-based surfactant used in development for antibacterial freshness-keeping film or antibacterial nonwoven fabric. Stearyldiethanolamine can be used as a collector towards the surfaces of quartz and malachite, to recover efficiently malachite from quartz. Stearyldiethanolamine can disrupt bacterial cell membrane with the alkyl chain, leading to irreversible damage and cell death.
Nur für Forschungszwecke. Wir verkaufen nicht an Patienten.
- CAS. Nr.: 10213-78-2
- Formel: C22H47NO2
- Molecular Weight:357.61
-
Speicherung:
4°C, sealed storage, away from moisture and light
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light)
Biologische Aktivität
Stearyldiethanolamine (Compound SDA) (0-10 mg/L) increases the recovery of malachite and quartz dose-dependently[2].
Stearyldiethanolamine (Compound C18DEA) demonstrates inhibitory effects to both Gram positive and Gram negative bacteria[3].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Chemical Information
-
CAS. Nr. 10213-78-2
-
Appearance Solid
-
Molecular Weight 357.61
-
Formel C22H47NO2
-
Color White to off-white
-
SMILES
CCCCCCCCCCCCCCCCCCN(CCO)CCO
-
Versand
Room temperature in continental US; may vary elsewhere.
-
Speicherung
4°C, sealed storage, away from moisture and light
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light)
Lösungsmittel & Löslichkeit
Ethanol : 100 mg/mL (279.63 mM; Need ultrasonic)
DMSO : 41.67 mg/mL (116.52 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Konzentration (Stammlösung) × Volumen (Stammlösung) = Konzentration (Ziellösung) × Volumen (Ziellösung)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.33 mg/mL (6.52 mM); Clear solution
This protocol yields a clear solution of ≥ 2.33 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (23.3 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL. * In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light)
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Reinheit & Dokumentation
-
Data Sheet (266 KB)
-
SDS (394 KB)
- English - EN (394 KB)
- Français - FR (394 KB)
- Deutsch - DE (394 KB)
- Norwegian - NO (394 KB)
- Español - ES (394 KB)
- Swedish - SV (394 KB)
- Italian - IT (394 KB)
- Korean - KR (394 KB)
- Portuguese - PT (394 KB)
-
Handling Instructions (2659 KB)
Verweise
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO / Ethanol | 1 mM | 2.7963 mL | 13.9817 mL | 27.9634 mL | 69.9086 mL |
| 5 mM | 0.5593 mL | 2.7963 mL | 5.5927 mL | 13.9817 mL | |
| 10 mM | 0.2796 mL | 1.3982 mL | 2.7963 mL | 6.9909 mL | |
| 15 mM | 0.1864 mL | 0.9321 mL | 1.8642 mL | 4.6606 mL | |
| 20 mM | 0.1398 mL | 0.6991 mL | 1.3982 mL | 3.4954 mL | |
| 25 mM | 0.1119 mL | 0.5593 mL | 1.1185 mL | 2.7963 mL | |
| 30 mM | 0.0932 mL | 0.4661 mL | 0.9321 mL | 2.3303 mL | |
| 40 mM | 0.0699 mL | 0.3495 mL | 0.6991 mL | 1.7477 mL | |
| 50 mM | 0.0559 mL | 0.2796 mL | 0.5593 mL | 1.3982 mL | |
| 60 mM | 0.0466 mL | 0.2330 mL | 0.4661 mL | 1.1651 mL | |
| 80 mM | 0.0350 mL | 0.1748 mL | 0.3495 mL | 0.8739 mL | |
| 100 mM | 0.0280 mL | 0.1398 mL | 0.2796 mL | 0.6991 mL |