Xylotetraose
Based on 1 Customer Validation
Xylotetraose is a xylo-oligosaccharide and a substrate of Taxy11. Xylotetraose serves as a substrate for the endo-xylanase Taxy11, and is hydrolyzed by it into xylobiose and xylotriose.
연구목적의 판매만을 진행합니다. 환자를 대상으로 한 판매는 하지 않습니다.
- Purity: 99.40%
- CAS No.: 22416-58-6
- 화학식: C20H34O17
- 분자량:546.47
-
보관:
4°C, protect from light
* In solvent : -80°C, 6 months; -20°C, 1 month (protect from light)
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Biological Activity
-
Chemical Information
-
용액&용해도
- 순도&문서
- References
-
Help & FAQs
-
HY-N2469
Xylotriose
-
HY-N6839
1,4-b-D-Xylopentaose
-
HY-N6831
Xylohexaose
-
HY-N2468
Xylobiose
-
HY-N1938
D(+)-Raffinose pentahydrate
-
HY-N2325
D-(+)-Cellobiose
-
HY-113011
Maltotriose
-
HY-127018
Maltoheptaose
-
HY-N2577
1F-Fructofuranosylnystose
-
HY-N2464
Maltotetraose
-
HY-N6838
1,1,1,1-Kestohexaose
-
HY-N1495
Maltopentaose
Biological Activity
Xylotetraose (5 mg/mL; 5-30 min) is hydrolyzed by purified recombinant Taxy11 primarily into xylobiose and xylotriose[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Chemical Information
-
CAS No. 22416-58-6
-
Appearance Solid
-
분자량 546.47
-
화학식 C20H34O17
-
Color White to off-white
-
SMILES
O[C@H]([C@H]([C@H](O[C@H](CO)[C@H](O)[C@@H](O)C=O)OC1)O)[C@]1([H])O[C@H]2[C@@H]([C@H]([C@H](O[C@@]3([H])[C@@H]([C@H]([C@H](O)CO3)O)O)CO2)O)O
-
Structure Classification
-
Initial Source
-
선적
Room temperature in continental US; may vary elsewhere.
-
보관
4°C, protect from light
* In solvent : -80°C, 6 months; -20°C, 1 month (protect from light)
용액&용해도
DMSO : 100 mg/mL (182.99 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
H2O : 100 mg/mL (182.99 mM; Need ultrasonic)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (4.57 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.5 mg/mL (4.57 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Working solution concentration: 0.22 mg/mL
This product has good water solubility, please refer to the measured solubility data in water/PBS/Saline for details.
순도&문서
-
Data Sheet (272 KB)
-
SDS (252 KB)
- English - EN (252 KB)
- Français - FR (252 KB)
- Deutsch - DE (252 KB)
- Norwegian - NO (252 KB)
- Español - ES (252 KB)
- Swedish - SV (252 KB)
- Italian - IT (252 KB)
- Korean - KR (252 KB)
- Portuguese - PT (252 KB)
-
Handling Instructions (2659 KB)
References
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO / H2O | 1 mM | 1.8299 mL | 9.1496 mL | 18.2993 mL | 45.7482 mL |
| 5 mM | 0.3660 mL | 1.8299 mL | 3.6599 mL | 9.1496 mL | |
| 10 mM | 0.1830 mL | 0.9150 mL | 1.8299 mL | 4.5748 mL | |
| 15 mM | 0.1220 mL | 0.6100 mL | 1.2200 mL | 3.0499 mL | |
| 20 mM | 0.0915 mL | 0.4575 mL | 0.9150 mL | 2.2874 mL | |
| 25 mM | 0.0732 mL | 0.3660 mL | 0.7320 mL | 1.8299 mL | |
| 30 mM | 0.0610 mL | 0.3050 mL | 0.6100 mL | 1.5249 mL | |
| 40 mM | 0.0457 mL | 0.2287 mL | 0.4575 mL | 1.1437 mL | |
| 50 mM | 0.0366 mL | 0.1830 mL | 0.3660 mL | 0.9150 mL | |
| 60 mM | 0.0305 mL | 0.1525 mL | 0.3050 mL | 0.7625 mL | |
| 80 mM | 0.0229 mL | 0.1144 mL | 0.2287 mL | 0.5719 mL | |
| 100 mM | 0.0183 mL | 0.0915 mL | 0.1830 mL | 0.4575 mL |
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.
Xylotetraose Related Classifications
HY-N6840 Related Classifications
Powered by Bioz