CIL56
Based on 4 publication(s) in Google Scholar
CIL56 is a potent and selective ferroptosis inducer. Ferroptosis is an iron-dependent form of regulated cell death (RCD).
Nur für Forschungszwecke. Wir verkaufen nicht an Patienten.
- Reinheit: 99.53%
- CAS. Nr.: 300802-28-2
- Formel: C23H27N3O5S2
- Molecular Weight:489.61
-
Speicherung:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 2 years , -20°C, 1 year
Publications Citing Use of MedChemExpress (MCE) CIL56
More
Biologische Aktivität
|
Cell Line
|
Type | Value | Description | References |
|---|---|---|---|---|
| HT-29 | IC50 |
0.99 μM
Compound: 2
|
Inhibition of Wnt/beta-catenin transcriptional activity in human HT-29 cells assessed as depletion of beta-catenin level by TCF luciferase promoter reporter assay
Inhibition of Wnt/beta-catenin transcriptional activity in human HT-29 cells assessed as depletion of beta-catenin level by TCF luciferase promoter reporter assay
|
[PMID: 26182238] |
Ferroptosis is a non-apoptotic form of regulated cell death observed in cancer cells, kidney cells and neurons.CIL56 induces iron-dependent reactive oxygen species (ROS). Antioxidants and iron chelators only suppress the lethality of low concentrations of CIL56[1]. CIL56 triggers cell death dependent upon the rate-limiting de novo lipid synthetic enzyme ACC1.Using mass spectrometry, the metabolome of HT-1080 cells treated with CIL56 (6.5 μM)±TOFA (4 μM) is analyzed, compared to vehicle-treated controls. Among the 298 polar and nonpolar metabolites identified in this analysis, the levels of 141 metabolites are significantly altered by CIL56 treatment, with 82 metabolites significantly increased and 59 significantly decreased (FDR q<0.01). CIL56 triggers the striking TOFA-sensitive accumulation of all detectable long chain saturated and monounsaturated fatty acids and all detectable polyunsaturated fatty acids. A plausible model to account for the accumulation of both nonessential and essential fatty acids species is that CIL56 inhibits the normal breakdown of fatty acids by mitochondrial β-oxidation. CIL56 accelerates the ACC1-dependent production of malonyl-CoA, a metabolite that acts as a negative regulator of this process[2].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Chemical Information
-
CAS. Nr. 300802-28-2
-
Appearance Solid
-
Molecular Weight 489.61
-
Formel C23H27N3O5S2
-
Color White to off-white
-
SMILES
O=S(C1=CC2=C(C=C1)C3=C(C=C(S(=O)(N4CCCCC4)=O)C=C3)/C2=N\O)(N5CCCCC5)=O
-
Versand
Room temperature in continental US; may vary elsewhere.
-
Speicherung
Powder -20°C 3 years 4°C 2 years In solvent -80°C 2 years -20°C 1 year
Publications (4)
-
Journal Impact Factor
-
Most Recent
-
Cell Death Discov
Exploiting dysregulated iron homeostasis to eradicate persistent high-grade serous ovarian cancer. [Abstract]2025 Sep 25;11(1):423. PMID: 40998801 -
J Neuroimmune Pharmacol
HucMSCs-Derived Extracellular Vesicles Deliver RPS27A Protein to Manipulate the MDM2-P53 Axis and Ameliorate Neurological Dysfunction in Parkinson's Disease. [Abstract]2025 May 8;20(1):52. PMID: 40338442 -
Cell Oncol (Dordr)
Disrupting YAP1-mediated glutamine metabolism induces synthetic lethality alongside ODC1 inhibition in osteosarcoma. [Abstract]2024 Oct;47(5):1845-1861. PMID: 39115605 -
Lösungsmittel & Löslichkeit
DMSO : 41.67 mg/mL (85.11 mM; ultrasonic and warming and heat to 60°C; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
Konzentration (Stammlösung) × Volumen (Stammlösung) = Konzentration (Ziellösung) × Volumen (Ziellösung)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: 2.5 mg/mL (5.11 mM); Suspended solution; Need ultrasonic and warming
This protocol yields a suspended solution of 2.5 mg/mL. Suspended solution can be used for oral and intraperitoneal injection.
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.08 mg/mL (4.25 mM); Clear solution
This protocol yields a clear solution of ≥ 2.08 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (20.8 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Reinheit & Dokumentation
-
Data Sheet (275 KB)
-
SDS (393 KB)
- English - EN (393 KB)
- Français - FR (393 KB)
- Deutsch - DE (393 KB)
- Norwegian - NO (393 KB)
- Español - ES (393 KB)
- Swedish - SV (393 KB)
- Italian - IT (393 KB)
- Korean - KR (393 KB)
- Portuguese - PT (393 KB)
-
Handling Instructions (2659 KB)
Verweise
[1]. Shimada K, et al. Global survey of cell death mechanisms reveals metabolic regulation of ferroptosis. Nat Chem Biol. 2016 Jul;12(7):497-503. [Content Brief]
[2]. Dixon SJ, et al. Human Haploid Cell Genetics Reveals Roles for Lipid Metabolism Genes in Nonapoptotic Cell Death. ACS Chem Biol. 2015 Jul 17;10(7):1604-9. [Content Brief]
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.0424 mL | 10.2122 mL | 20.4244 mL | 51.0611 mL |
| 5 mM | 0.4085 mL | 2.0424 mL | 4.0849 mL | 10.2122 mL | |
| 10 mM | 0.2042 mL | 1.0212 mL | 2.0424 mL | 5.1061 mL | |
| 15 mM | 0.1362 mL | 0.6808 mL | 1.3616 mL | 3.4041 mL | |
| 20 mM | 0.1021 mL | 0.5106 mL | 1.0212 mL | 2.5531 mL | |
| 25 mM | 0.0817 mL | 0.4085 mL | 0.8170 mL | 2.0424 mL | |
| 30 mM | 0.0681 mL | 0.3404 mL | 0.6808 mL | 1.7020 mL | |
| 40 mM | 0.0511 mL | 0.2553 mL | 0.5106 mL | 1.2765 mL | |
| 50 mM | 0.0408 mL | 0.2042 mL | 0.4085 mL | 1.0212 mL | |
| 60 mM | 0.0340 mL | 0.1702 mL | 0.3404 mL | 0.8510 mL | |
| 80 mM | 0.0255 mL | 0.1277 mL | 0.2553 mL | 0.6383 mL |