ML-18
Based on 1 Customer Validation
ML-18 is a non-peptide bombesin receptor subtype-3 (BRS-3) antagonist with an IC50 of 4.8 μM.
Nur für Forschungszwecke. Wir verkaufen nicht an Patienten.
- Reinheit: 98.87%
- CAS. Nr.: 1422269-30-4
- Formel: C32H35N5O5
- Molecular Weight:569.65
-
Speicherung:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 2 years , -20°C, 1 year
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Biologische Aktivität
-
Chemical Information
-
Lösungsmittel & Löslichkeit
- Protokoll
- Reinheit & Dokumentation
- Verweise
-
Help & FAQs
-
GPCR/G Protein Compound Library
HY-L006
-
Anti-Cancer Compound Library
HY-L025
-
Anti-Lung Cancer Compound Library
HY-L075
-
Targeted Diversity Library
HY-L099
-
Membrane Protein-targeted Compound Library
HY-L149
-
Membrane Receptor-targeted Compound Library
HY-L150
-
Bioactive Compound Library Max
HY-L181
-
MCE Bioactive Compound Library
HY-L001V
-
Bioactive Compound Library
HY-L001
-
High-Throughput Bioactive Compound Library
HY-L205
-
Lactylation Compound Library
HY-L249
Biologische Aktivität
IC50: 4.8 μM (BRS-3)[1]
ML-18 inhibits specific 125I-BA1 (DTyr-Gln-Trp-Ala-Val-βAla-His-Phe-Nle-NH2)BB6-14 binding to NCI-H1299 lung cancer cells stably transfected with BRS-3 with IC50 values of 4.8 μM. ML-18 binds with lower affinity to the GRPR and NMBR with IC50 values of 16 and more than 100 μM, respectively. ML-18 at 16 μM inhibits the ability of 10 nM BA1 to elevate cytosolic Ca2+ in a reversible manner using lung cancer cells loaded with FURA2-AM. ML-18 at 16 μM inhibits the ability of 100 nM BA1 to cause tyrosine phosphorylation of the EGFR and ERK in lung cancer cells. It inhibits the proliferation of lung cancer cells[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Chemical Information
-
CAS. Nr. 1422269-30-4
-
Appearance Solid
-
Molecular Weight 569.65
-
Formel C32H35N5O5
-
Color White to yellow
-
SMILES
O=C([C@@H](NC(NC1=CC=C([N+]([O-])=O)C=C1)=O)CC2=CNC3=CC=CC=C23)NCC4(C5=CC=C(OC)C=C5)CCCCC4
-
Versand
Room temperature in continental US; may vary elsewhere.
-
Speicherung
Powder -20°C 3 years 4°C 2 years In solvent -80°C 2 years -20°C 1 year
Lösungsmittel & Löslichkeit
DMSO : ≥ 100 mg/mL (175.55 mM; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
* "≥" means soluble, but saturation unknown.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
Konzentration (Stammlösung) × Volumen (Stammlösung) = Konzentration (Ziellösung) × Volumen (Ziellösung)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: 2.5 mg/mL (4.39 mM); Suspended solution; Need ultrasonic
This protocol yields a suspended solution of 2.5 mg/mL. Suspended solution can be used for oral and intraperitoneal injection.
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Protokoll
The cells are incubated in SIT buffer containing 0.25% bovine serum albumin and 250 μg/mL bacitracin and 125I-BA1 (100,000 cpm) is added, as well as various concentrations of unlabelled competitor (ML-18). After incubation at 37°C for 30 min, free 125I-BA1 is removed by washing 3 times in buffer and the cells which contain bound 125I-BA1 is dissolved in 0.2 N NaOH and counted in a gamma counter. The IC50 is calculated for each unlabeled competitor[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Cell viability is measured using the MTT assay. NCI-H727 or NCI-H1299 cells transfected with BRS-3 are treated with ML-18 (0, 4.8, 16, 48 μM) or gefitinib added. After 2 days, 15 μL of 0.1 % MTT solution added. After 4 h, 150 μL of DMSO is added. After 16 h, the optical density at 570 nm is determined[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Reinheit & Dokumentation
-
Data Sheet (278 KB)
-
SDS (393 KB)
- English - EN (393 KB)
- Français - FR (393 KB)
- Deutsch - DE (393 KB)
- Norwegian - NO (393 KB)
- Español - ES (393 KB)
- Swedish - SV (393 KB)
- Italian - IT (393 KB)
- Korean - KR (393 KB)
- Portuguese - PT (393 KB)
-
Handling Instructions (2659 KB)
Verweise
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 1.7555 mL | 8.7773 mL | 17.5546 mL | 43.8866 mL |
| 5 mM | 0.3511 mL | 1.7555 mL | 3.5109 mL | 8.7773 mL | |
| 10 mM | 0.1755 mL | 0.8777 mL | 1.7555 mL | 4.3887 mL | |
| 15 mM | 0.1170 mL | 0.5852 mL | 1.1703 mL | 2.9258 mL | |
| 20 mM | 0.0878 mL | 0.4389 mL | 0.8777 mL | 2.1943 mL | |
| 25 mM | 0.0702 mL | 0.3511 mL | 0.7022 mL | 1.7555 mL | |
| 30 mM | 0.0585 mL | 0.2926 mL | 0.5852 mL | 1.4629 mL | |
| 40 mM | 0.0439 mL | 0.2194 mL | 0.4389 mL | 1.0972 mL | |
| 50 mM | 0.0351 mL | 0.1755 mL | 0.3511 mL | 0.8777 mL | |
| 60 mM | 0.0293 mL | 0.1463 mL | 0.2926 mL | 0.7314 mL | |
| 80 mM | 0.0219 mL | 0.1097 mL | 0.2194 mL | 0.5486 mL | |
| 100 mM | 0.0176 mL | 0.0878 mL | 0.1755 mL | 0.4389 mL |
ML-18 Related Classifications
HY-101844 Related Classifications
Powered by Bioz