KH-3
Based on 1 publication(s) in Google Scholar
KH-3 is a potent RNA-binding protein Hu antigen R (HuR) inhibitor with an IC50 value of 0.35 μM. KH-3 has anti-proliferative activity. KH-3 suppresses breast cancer cell invasion as well as delays the initiation of lung colonies by disrupting HuR-FOXQ1 mRNA interaction.
Nur für Forschungszwecke. Wir verkaufen nicht an Patienten.
- Reinheit: 98.20%
- CAS. Nr.: 1215115-03-9
- Formel: C21H22N2O4S2
- Molecular Weight:430.54
-
Speicherung:
4°C, sealed storage, away from moisture and light
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light)
Publications Citing Use of MedChemExpress (MCE) KH-3
More
Biologische Aktivität
KH-3 (0-100 μM; 48 h; human breast cancer cell lines) blocks HuR function through decrease Bcl-2, Mis2 and XIAP mRNA levels and inhibits breast cancer cells growth in a dose dependent manner[1].
KH-3 (0-10 μM; 0-24 h; MDA-MB-231 and SUM159 cells) inhibits breast cancer cell migration and invasion in a dose dependent manner[1].
KH-3 (0-10 μM; MDA-MB-231 and SUM159 cells) inhibits the interaction between HuR and FOXQ1 mRNA and decreases the amount of HuR protein pulled down by biotinylated AREFOXQ1 RNA oligomer[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Cell Line:MDA-MB-231 cells
-
Concentration:5 and 10 μM
-
Incubation Time:48 hours
-
Result:Reduced the protein expression levels of Bcl-2, Msi2 and XIAP.
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Animal Model:Female athymic NCr-nu/nu mice of MDA-MB-231 orthotopic xenograft and BALB/c mice of MDA-MB-231 orthotopic xenograft[1]
-
Dosage:100 mg/kg
-
Administration:Intraperitoneal injection; three times a week for three weeks
-
Result:Inhibited tumor growth, resulting in 60% tumor regression after three-week treatment and delayed the initiation of pulmonary metastases.
Reduced the protein expression levels of HuR targets in tumor tissues as well as the induction of E-cadherin expression.
Chemical Information
-
CAS. Nr. 1215115-03-9
-
Appearance Solid
-
Molecular Weight 430.54
-
Formel C21H22N2O4S2
-
Color Off-white to light yellow
-
SMILES
O=C(NO)/C=C/C1=CC2=CC(NS(=O)(C3=CC=C(C(C)(C)C)C=C3)=O)=CC=C2S1
-
Versand
Room temperature in continental US; may vary elsewhere.
-
Speicherung
4°C, sealed storage, away from moisture and light
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light)
Publications (1)
-
Journal Impact Factor
-
Most Recent
-
bioRxiv
HuR Regulates GATA3-Driven Type 2 Inflammation in CD4+ T cells and ILC2 in Airway Inflammation. [Abstract]2026 May 14:2026.04.23.720195. PMID: 42094570
Lösungsmittel & Löslichkeit
DMSO : 100 mg/mL (232.27 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Konzentration (Stammlösung) × Volumen (Stammlösung) = Konzentration (Ziellösung) × Volumen (Ziellösung)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (5.81 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: 2.5 mg/mL (5.81 mM); Suspended solution; Need ultrasonic
This protocol yields a suspended solution of 2.5 mg/mL. Suspended solution can be used for oral and intraperitoneal injection.
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL. * In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light)
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Reinheit & Dokumentation
-
Data Sheet (272 KB)
-
SDS (393 KB)
- English - EN (393 KB)
- Français - FR (393 KB)
- Deutsch - DE (393 KB)
- Norwegian - NO (393 KB)
- Español - ES (393 KB)
- Swedish - SV (393 KB)
- Italian - IT (393 KB)
- Korean - KR (393 KB)
- Portuguese - PT (393 KB)
-
Handling Instructions (2659 KB)
Verweise
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.3227 mL | 11.6133 mL | 23.2266 mL | 58.0666 mL |
| 5 mM | 0.4645 mL | 2.3227 mL | 4.6453 mL | 11.6133 mL | |
| 10 mM | 0.2323 mL | 1.1613 mL | 2.3227 mL | 5.8067 mL | |
| 15 mM | 0.1548 mL | 0.7742 mL | 1.5484 mL | 3.8711 mL | |
| 20 mM | 0.1161 mL | 0.5807 mL | 1.1613 mL | 2.9033 mL | |
| 25 mM | 0.0929 mL | 0.4645 mL | 0.9291 mL | 2.3227 mL | |
| 30 mM | 0.0774 mL | 0.3871 mL | 0.7742 mL | 1.9356 mL | |
| 40 mM | 0.0581 mL | 0.2903 mL | 0.5807 mL | 1.4517 mL | |
| 50 mM | 0.0465 mL | 0.2323 mL | 0.4645 mL | 1.1613 mL | |
| 60 mM | 0.0387 mL | 0.1936 mL | 0.3871 mL | 0.9678 mL | |
| 80 mM | 0.0290 mL | 0.1452 mL | 0.2903 mL | 0.7258 mL | |
| 100 mM | 0.0232 mL | 0.1161 mL | 0.2323 mL | 0.5807 mL |