TPh A
Based on 2 publication(s) in Google Scholar
TPh A (Triphenyl Compound A) is a potent inhibitor of the nuclear protein pirin and binds specifically to pirin with a Ki of 0.6 uM. TPh A disrupts the formation of the bcl3–pirin complex. TPh A can be used as a novel small molecule tool to regulate pirin in cells.
Nur für Forschungszwecke. Wir verkaufen nicht an Patienten.
- Reinheit: 99.75%
- CAS. Nr.: 21306-65-0
- Formel: C21H21NO3S2
- Molecular Weight:399.53
-
Speicherung:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 6 months , -20°C, 1 month
-
Biologische Aktivität
-
Chemical Information
-
Lösungsmittel & Löslichkeit
- Reinheit & Dokumentation
- Verweise
-
Help & FAQs
Publications Citing Use of MedChemExpress (MCE) TPh A
More
Biologische Aktivität
The Pirin is a nuclear protein with the nuclear factor I/CCAAT box transcription factor (NFI/CTF). Pirin proteins are highly conserved between mammals, plants, fungi, and prokaryotic organisms and are considered to belong to the cupin superfamily.TPh A (20 μM; 5 hours) reduces the amount of pirin-bound Bcl3 and inhibits the interaction between pirin and Bcl3 in HEK293T cells in a glutathione S-transferase (GST) pulldown assay (HEK293T cells are transfected with vectors that encoded bcl3-Myc and pirin-His6 for 43 h of transfection)[1].TPh A (0-100 μM; 48 hours) does not exert any potent cytotoxic activity against many human cancer cell lines, it against MCF7, MDA-MB231, HeLa, DU145, HepG2, A549, HT1080, WM266-4, and SK-MEL-28 cells with IC50 values >50 μM, and exhibits IC50 values of 27 μM, 20 μM and 26 μM for PC3 HL60 and HT29 cells, respectively[1].TPhA (0-50 μM; 48 hours) inhibits cell migration in WM266-4 cells, SK-MEL-28 cell in a concentration-dependent manner[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Cell Line:MCF7, MDA-MB231, HeLa, DU145, HepG2, A549, HT1080, WM266-4, and SK-MEL-28 cells
-
Concentration:0-100 μM
-
Incubation Time:48 hours
-
Result:Did not exert any potent cytotoxic activity against many human cancer cell lines.
Chemical Information
-
CAS. Nr. 21306-65-0
-
Appearance Solid
-
Molecular Weight 399.53
-
Formel C21H21NO3S2
-
Color White to off-white
-
SMILES
O=[S](/N=[S](C(C=C1)=CC=C1OCC2=CC=CC=C2)\C)(C(C=C3)=CC=C3C)=O
-
Synonyms
Triphenyl Compound A
-
Versand
Room temperature in continental US; may vary elsewhere.
-
Speicherung
Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
Publications (2)
-
Journal Impact Factor
-
Most Recent
-
Nat Commun
Streamlined analysis of drug targets by proteome integral solubility alteration indicates organ-specific engagement. [Abstract]2024 Oct 16;15(1):8923. PMID: 39414818 -
Lösungsmittel & Löslichkeit
DMSO : 250 mg/mL (625.74 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Konzentration (Stammlösung) × Volumen (Stammlösung) = Konzentration (Ziellösung) × Volumen (Ziellösung)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.08 mg/mL (5.21 mM); Clear solution
This protocol yields a clear solution of ≥ 2.08 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (20.8 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.08 mg/mL (5.21 mM); Clear solution
This protocol yields a clear solution of ≥ 2.08 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (20.8 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Reinheit & Dokumentation
-
Data Sheet (273 KB)
-
SDS (251 KB)
- English - EN (251 KB)
- Français - FR (251 KB)
- Deutsch - DE (251 KB)
- Norwegian - NO (251 KB)
- Español - ES (251 KB)
- Swedish - SV (251 KB)
- Italian - IT (251 KB)
- Portuguese - PT (251 KB)
-
Handling Instructions (2659 KB)
Verweise
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.5029 mL | 12.5147 mL | 25.0294 mL | 62.5735 mL |
| 5 mM | 0.5006 mL | 2.5029 mL | 5.0059 mL | 12.5147 mL | |
| 10 mM | 0.2503 mL | 1.2515 mL | 2.5029 mL | 6.2574 mL | |
| 15 mM | 0.1669 mL | 0.8343 mL | 1.6686 mL | 4.1716 mL | |
| 20 mM | 0.1251 mL | 0.6257 mL | 1.2515 mL | 3.1287 mL | |
| 25 mM | 0.1001 mL | 0.5006 mL | 1.0012 mL | 2.5029 mL | |
| 30 mM | 0.0834 mL | 0.4172 mL | 0.8343 mL | 2.0858 mL | |
| 40 mM | 0.0626 mL | 0.3129 mL | 0.6257 mL | 1.5643 mL | |
| 50 mM | 0.0501 mL | 0.2503 mL | 0.5006 mL | 1.2515 mL | |
| 60 mM | 0.0417 mL | 0.2086 mL | 0.4172 mL | 1.0429 mL | |
| 80 mM | 0.0313 mL | 0.1564 mL | 0.3129 mL | 0.7822 mL | |
| 100 mM | 0.0250 mL | 0.1251 mL | 0.2503 mL | 0.6257 mL |
Powered by Bioz