Pyclen
Based on 1 Customer Validation
Pyclen forms kinetically and thermodynamically stable nine-coordinate Ln (III) complexes, as well as Mn (II)-based MRI contrast agents. Pyclen-Based Mn(II) Complexes can be used for liver-specific MRI.
Nos produits utilisent uniquement pour la recherche. Nous ne vendons pas aux patients.
- Pureté: 99.81%
- CAS No.: 78668-34-5
- Formule: C11H18N4
- Masse moléculaire:206.29
-
Stockage:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 6 months , -20°C, 1 month
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Activité biologique
-
Chemical Information
-
Solvant et solubilité
- Pureté et documentation
- Références
-
Help & FAQs
Activité biologique
Pyclen can form stable, highly luminescent lanthanide (III) complexes, which serve as one- and two-photon biological probes. These complexes stain living human breast cancer cells, exhibit no significant toxicity in the living Danio rerio (zebrafish) model, and enable high-quality in vivo two-photon microscopy imaging[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Chemical Information
-
CAS No. 78668-34-5
-
Appearance Solid
-
Masse moléculaire 206.29
-
Formule C11H18N4
-
Color Off-white to light yellow
-
SMILES
C12=CC=CC(CNCCNCCNC2)=N1
-
Livraison
Room temperature in continental US; may vary elsewhere.
-
Stockage
Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
Solvant et solubilité
DMSO : 50 mg/mL (242.38 mM; ultrasonic and warming and heat to 60°C; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (12.12 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.5 mg/mL (12.12 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Pureté et documentation
-
Fiche technique (276 KB)
-
SDS (416 KB)
- English - EN (416 KB)
- Français - FR (416 KB)
- Deutsch - DE (416 KB)
- Norwegian - NO (416 KB)
- Español - ES (416 KB)
- Swedish - SV (416 KB)
- Italian - IT (416 KB)
- Korean - KR (416 KB)
- Portuguese - PT (416 KB)
-
Instruction de manipulation (2659 KB)
Références
[1]. Hamon N, et al. Pyclen-Based Ln(III) Complexes as Highly Luminescent Bioprobes for In Vitro and In Vivo One- and Two-Photon Bioimaging Applications. J Am Chem Soc. 2020 Jun 3;142(22):10184-10197. [Content Brief]
[2]. Hall RC, et al. Manganese(II) EOB-Pyclen Diacetate for Liver-Specific MRI. ACS Appl Bio Mater. 2022;5(2):451-458. [Content Brief]
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 4.8475 mL | 24.2377 mL | 48.4754 mL | 121.1886 mL |
| 5 mM | 0.9695 mL | 4.8475 mL | 9.6951 mL | 24.2377 mL | |
| 10 mM | 0.4848 mL | 2.4238 mL | 4.8475 mL | 12.1189 mL | |
| 15 mM | 0.3232 mL | 1.6158 mL | 3.2317 mL | 8.0792 mL | |
| 20 mM | 0.2424 mL | 1.2119 mL | 2.4238 mL | 6.0594 mL | |
| 25 mM | 0.1939 mL | 0.9695 mL | 1.9390 mL | 4.8475 mL | |
| 30 mM | 0.1616 mL | 0.8079 mL | 1.6158 mL | 4.0396 mL | |
| 40 mM | 0.1212 mL | 0.6059 mL | 1.2119 mL | 3.0297 mL | |
| 50 mM | 0.0970 mL | 0.4848 mL | 0.9695 mL | 2.4238 mL | |
| 60 mM | 0.0808 mL | 0.4040 mL | 0.8079 mL | 2.0198 mL | |
| 80 mM | 0.0606 mL | 0.3030 mL | 0.6059 mL | 1.5149 mL | |
| 100 mM | 0.0485 mL | 0.2424 mL | 0.4848 mL | 1.2119 mL |
Pyclen Related Classifications
HY-115853 Related Classifications
Powered by Bioz
- Pyclen
- 78668-34-5
- Biochemical Assay Reagents
- polyazamacrocyclic chelating ligand precursor
- in vivo two-photon microscopy imaging
- two-photon bioprobes
- human breast cancer cells
- 1,4,7,10-tetraaza-2,6-pyridinophane
- Ln(III) complexes
- lanthanide(III) complexes
- zebrafish models
- manganese(II)-based MRI contrast agents
- one-photon bioprobes
- Inhibitor
- inhibitor
- inhibit