SA91-0178
Based on 1 Customer Validation
SA91-0178 is a METTL1 inhibitor. SA91-0178 inhibits m7G methylation of RNA, reduces SARM1 stability, mitigates NAD+ depletion and metabolic reprogramming in macrophages. SA91-0178 demonstrates excellent protective efficacy against multiple organ injury in cecal ligation and puncture (CLP)-induced and ischemia/reperfusion (I/R)-induced mice. SA91-0178 can be used for the study of systemic inflammatory diseases.
Nos produits utilisent uniquement pour la recherche. Nous ne vendons pas aux patients.
- Pureté: 98.14%
- CAS No.: 2244341-81-7
- Formule: C28H27N3O4
- Masse moléculaire:469.53
-
Stockage:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 6 months , -20°C, 1 month
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Activité biologique
-
Chemical Information
-
Solvant et solubilité
- Pureté et documentation
- Références
-
Help & FAQs
-
Epigenetics Compound Library
HY-L005
-
Immunology/Inflammation Compound Library
HY-L007
-
Pyroptosis Compound Library
HY-L059
-
Macrophage Related Compound Library
HY-L174
-
Bioactive Compound Library Max
HY-L181
-
MCE Bioactive Compound Library
HY-L001V
-
Bioactive Compound Library
HY-L001
-
High-Throughput Bioactive Compound Library
HY-L205
Activité biologique
SA91-0178 inhibits LPS (HY-D1056)-induced TNF-α and IL-1β secretion in mouse bone marrow-derived macrophages (BMDMs) without cytotoxicity[1].
SA91-0178 attenuates LPS-induced m7G modification in RAW264.7 cells and human peripheral blood mononuclear cell (PBMC)-derived macrophages[1].
SA91-0178 reduces luciferase activity of wild-type SARM1 3'UTR reporter in shMETTL1-treated THP-1-derived macrophages[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Animal Model:8-week-old male C57BL/6 mice, Lyz2creMettl1fl/fl mice were ligated and punctured, and a small amount of cecal content was extruded by gentle squeezing [1]
-
Dosage:5, 10, 15 mg/kg
-
Administration:ip, once
-
Result:Achieved reduction rates of serum Cre, BUN, AST, and ALT.
Reduced the renal tubular injury score.
Appeared decreased F4/80+ macrophage infiltration in kidney, liver, lung, and heart.
Showed greater reduction in SARM1 mRNA/protein levels in F4/80+ macrophages.
Chemical Information
-
CAS No. 2244341-81-7
-
Appearance Solid
-
Masse moléculaire 469.53
-
Formule C28H27N3O4
-
Color White to off-white
-
SMILES
O=C(O)C1=CC=CC(CNC(C2=CC=C(N(C)C(C34CCN(C5=CC=CC=C5)CC4)=O)C3=C2)=O)=C1
-
Livraison
Room temperature in continental US; may vary elsewhere.
-
Stockage
Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
Solvant et solubilité
DMSO : 100 mg/mL (212.98 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (5.32 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.5 mg/mL (5.32 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Pureté et documentation
-
Fiche technique (277 KB)
-
SDS (251 KB)
- English - EN (251 KB)
- Français - FR (251 KB)
- Deutsch - DE (251 KB)
- Norwegian - NO (251 KB)
- Español - ES (251 KB)
- Swedish - SV (251 KB)
- Italian - IT (251 KB)
- Korean - KR (251 KB)
- Portuguese - PT (251 KB)
-
Instruction de manipulation (2659 KB)
Références
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.1298 mL | 10.6489 mL | 21.2979 mL | 53.2447 mL |
| 5 mM | 0.4260 mL | 2.1298 mL | 4.2596 mL | 10.6489 mL | |
| 10 mM | 0.2130 mL | 1.0649 mL | 2.1298 mL | 5.3245 mL | |
| 15 mM | 0.1420 mL | 0.7099 mL | 1.4199 mL | 3.5496 mL | |
| 20 mM | 0.1065 mL | 0.5324 mL | 1.0649 mL | 2.6622 mL | |
| 25 mM | 0.0852 mL | 0.4260 mL | 0.8519 mL | 2.1298 mL | |
| 30 mM | 0.0710 mL | 0.3550 mL | 0.7099 mL | 1.7748 mL | |
| 40 mM | 0.0532 mL | 0.2662 mL | 0.5324 mL | 1.3311 mL | |
| 50 mM | 0.0426 mL | 0.2130 mL | 0.4260 mL | 1.0649 mL | |
| 60 mM | 0.0355 mL | 0.1775 mL | 0.3550 mL | 0.8874 mL | |
| 80 mM | 0.0266 mL | 0.1331 mL | 0.2662 mL | 0.6656 mL | |
| 100 mM | 0.0213 mL | 0.1065 mL | 0.2130 mL | 0.5324 mL |
SA91-0178 Related Classifications
HY-178159 Related Classifications
Powered by Bioz