TUG-2304
Based on 1 Customer Validation
TUG-2304 is a highly selective free fatty acid receptor 2 (FFA2, GPR43) antagonist that completely suppresses propionate-induced neutrophil migration and respiratory burst. TUG-2304 is applicable to research related to metabolic and inflammatory diseases.
Nos produits utilisent uniquement pour la recherche. Nous ne vendons pas aux patients.
- Pureté: 98.86%
- CAS No.: 3034674-48-8
- Formule: C20H20F3N5O2
- Masse moléculaire:419.40
-
Stockage:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 6 months , -20°C, 1 month
Activité biologique
Description
IC50 & Target
[1]|
GPR43 |
In Vitro
TUG-2304 (compound 16l) (1 nM-10 μM) completely inhibits propionate-induced migration of human neutrophils over the concentration range of 1 nM to 10 μM[1].
TUG-2304 (100 pM-10 μM) completely inhibits propionate-induced respiratory burst in human neutrophils, with a pIC50 of 8.24 nM, and its activity is specific to FFA2-mediated activation[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Parmacokinetics
In Vivo
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Chemical Information
-
CAS No. 3034674-48-8
-
Appearance Solid
-
Masse moléculaire 419.40
-
Formule C20H20F3N5O2
-
Color White to off-white
-
SMILES
FC(F)(F)C(C=C1)=CC=C1C[C@H](NC(CC2=CC(OC)=CC=C2)=O)CC3=NN=NN3
-
Livraison
Room temperature in continental US; may vary elsewhere.
-
Stockage
Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
Solvant et solubilité
In Vitro:
DMSO : 100 mg/mL (238.44 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
In Vivo:
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
In Vivo Dissolution Calculator
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Pureté et documentation
-
Fiche technique (272 KB)
-
SDS (252 KB)
- English - EN (252 KB)
- Français - FR (252 KB)
- Deutsch - DE (252 KB)
- Norwegian - NO (252 KB)
- Español - ES (252 KB)
- Swedish - SV (252 KB)
- Italian - IT (252 KB)
- Korean - KR (252 KB)
- Portuguese - PT (252 KB)
-
Instruction de manipulation (2659 KB)
Références
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.3844 mL | 11.9218 mL | 23.8436 mL | 59.6090 mL |
| 5 mM | 0.4769 mL | 2.3844 mL | 4.7687 mL | 11.9218 mL | |
| 10 mM | 0.2384 mL | 1.1922 mL | 2.3844 mL | 5.9609 mL | |
| 15 mM | 0.1590 mL | 0.7948 mL | 1.5896 mL | 3.9739 mL | |
| 20 mM | 0.1192 mL | 0.5961 mL | 1.1922 mL | 2.9804 mL | |
| 25 mM | 0.0954 mL | 0.4769 mL | 0.9537 mL | 2.3844 mL | |
| 30 mM | 0.0795 mL | 0.3974 mL | 0.7948 mL | 1.9870 mL | |
| 40 mM | 0.0596 mL | 0.2980 mL | 0.5961 mL | 1.4902 mL | |
| 50 mM | 0.0477 mL | 0.2384 mL | 0.4769 mL | 1.1922 mL | |
| 60 mM | 0.0397 mL | 0.1987 mL | 0.3974 mL | 0.9935 mL | |
| 80 mM | 0.0298 mL | 0.1490 mL | 0.2980 mL | 0.7451 mL | |
| 100 mM | 0.0238 mL | 0.1192 mL | 0.2384 mL | 0.5961 mL |