1. Membrane Transporter/Ion Channel Neuronal Signaling
  2. nAChR
  3. CCMI

CCMI  (Synonyms: AVL-3288; UCI-4083)

製品番号: HY-12150 純度: 99.97%
COA 取扱説明書 Technical Support

CCMI (AVL-3288) is a potent and selective α7 nAChR-positive allosteric modulator, does not bind to or activate α7 nAChRs via the orthosteric site, and causes significant positive modulation of agonist-induced currents at α7 nAChRs. CCMI has potential in CNS diseases with cognitive dysfunction.

商品は「研究用試薬」です。人や動物の医療用・臨床診断用・食品用の製品ではありません。
研究用途以外に使用した場合、当社は一切の責任を負いかねます。

CCMI

CCMI 構造式

CAS 番号 : 917837-54-8

容量 価格(税別) 在庫状況 数量
>無料サンプル (0.1 - 0.2 mg)   今すぐ申し込む  
Solid + Solvent (Highly Recommended)
10 mM * 1 mL in DMSO
ready for reconstitution
USD 68 在庫あり
Solution
10 mM * 1 mL in DMSO USD 68 在庫あり
Solid
5 mg $62 在庫あり
10 mg $100 在庫あり
25 mg $190 在庫あり
50 mg $300 在庫あり
100 mg $485 在庫あり
250 mg $920 在庫あり
500 mg   お問い合わせ  
1 g   お問い合わせ  

* アイテムを追加する前、数量をご選択ください

This product is a controlled substance and not for sale in your territory.

カスタマーレビュー

Based on 1 publication(s) in Google Scholar

Top Publications Citing Use of Products
  • 生物活性

  • 純度とドキュメンテーション

  • 参考文献

  • カスタマーレビュー

製品説明

CCMI (AVL-3288) is a potent and selective α7 nAChR-positive allosteric modulator, does not bind to or activate α7 nAChRs via the orthosteric site, and causes significant positive modulation of agonist-induced currents at α7 nAChRs. CCMI has potential in CNS diseases with cognitive dysfunction[1].

IC50 & Target

α7 nAChR[1]

Cellular Effect
Cell Line Type Value Description References
Oocyte EC50
0.5 μM
Compound: 6
Activation of human alpha-7 nAChR expressed in Xenopus oocytes assessed as modulation of nicotine-induced current by two-electrode voltage-clamp method
Activation of human alpha-7 nAChR expressed in Xenopus oocytes assessed as modulation of nicotine-induced current by two-electrode voltage-clamp method
[PMID: 17470817]
Oocyte EC50
0.6 μM
Compound: 6
Activation of human alpha-7 nAChR expressed in Xenopus oocytes assessed as modulation of choline-induced current by two-electrode voltage-clamp method
Activation of human alpha-7 nAChR expressed in Xenopus oocytes assessed as modulation of choline-induced current by two-electrode voltage-clamp method
[PMID: 17470817]
Oocyte EC50
0.7 μM
Compound: 6
Activation of human alpha-7 nAChR expressed in Xenopus oocytes assessed as modulation of acetyl choline -induced current by two-electrode voltage-clamp method
Activation of human alpha-7 nAChR expressed in Xenopus oocytes assessed as modulation of acetyl choline -induced current by two-electrode voltage-clamp method
[PMID: 17470817]
Oocyte EC50
6.3 μM
Compound: 6
Activation of human GABAA alpha-2-beta-3-gamma-2L receptor expressed in Xenopus oocytes assessed as modulation of GABA-induced current by two-electrode voltage-clamp method
Activation of human GABAA alpha-2-beta-3-gamma-2L receptor expressed in Xenopus oocytes assessed as modulation of GABA-induced current by two-electrode voltage-clamp method
[PMID: 17470817]
体外実験

CCMI (Compound 6) is a potent and selective α7 nAChR-positive allosteric modulator, does not bind to or activate α7 nAChRs via the orthosteric site, and causes significant positive modulation of agonist-induced currents at α7 nAChRs[1].

MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.

臨床実験
分子量

388.25

分子式

C19H15Cl2N3O2

CAS 番号
Appearance

Solid

Color

Light yellow to yellow

SMILES

O=C(NC1=CC=C(Cl)C=C1)/C(C2=CC(C)=NO2)=C/NC3=CC=C(Cl)C=C3

輸送条件

Room temperature in continental US; may vary elsewhere.

保管条件

-20°C, sealed storage, away from moisture

*In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)

溶剤 & 溶解度
体外: 

DMSO : 100 mg/mL (257.57 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)

Preparing
Stock Solutions
Concentration Solvent Mass 1 mg 5 mg 10 mg
1 mM 2.5757 mL 12.8783 mL 25.7566 mL
5 mM 0.5151 mL 2.5757 mL 5.1513 mL
10 mM 0.2576 mL 1.2878 mL 2.5757 mL
View the Complete Stock Solution Preparation Table

* Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.

  • Molarity Calculator

  • Dilution Calculator

Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)

Mass
=
Concentration
×
Volume
×
Molecular Weight *

Concentration (start) × Volume (start) = Concentration (final) × Volume (final)

一般には略語で表示されます:C1V1 = C2V2

濃度 (開始)

C1

×
体積 (開始)

V1

=
濃度 (終了)

C2

×
体積 (終了)

V2

体内:

Select the appropriate dissolution method based on your experimental animal and administration route.

For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for in vivo experiments, it is recommended to prepare freshly and use it on the same day.
The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.

  • Protocol 1

    Add each solvent one by one:  10% DMSO    40% PEG300    5% Tween-80    45% Saline

    Solubility: ≥ 2.08 mg/mL (5.36 mM); Clear solution

    This protocol yields a clear solution of ≥ 2.08 mg/mL (saturation unknown).

    Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (20.8 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.

    Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
  • Protocol 2

    Add each solvent one by one:  10% DMSO    90% Corn Oil

    Solubility: ≥ 2.08 mg/mL (5.36 mM); Clear solution

    This protocol yields a clear solution of ≥ 2.08 mg/mL (saturation unknown). If the continuous dosing period exceeds half a month, please choose this protocol carefully.

    Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (20.8 mg/mL) to 900 μL Corn oil, and mix evenly.

In Vivo Dissolution Calculator
Please enter the basic information of animal experiments:

Dosage

mg/kg

Animal weight
(per animal)

g

Dosing volume
(per animal)

μL

Number of animals

Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
%
DMSO +
+
%
Tween-80 +
%
Saline
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Calculation results:
Working solution concentration: mg/mL
Method for preparing stock solution: mg drug dissolved in μL  DMSO (Stock solution concentration: mg/mL).

*In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)

The concentration of the stock solution you require exceeds the measured solubility. The following solution is for reference only. If necessary, please contact MedChemExpress (MCE).
Method for preparing in vivo working solution for animal experiments: Take μL DMSO stock solution, add μL . μL , mix evenly, next add μL Tween 80, mix evenly, then add μL Saline.
 If the continuous dosing period exceeds half a month, please choose this protocol carefully.
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
純度とドキュメンテーション

純度: 99.97%

参考文献

Complete Stock Solution Preparation Table

* Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.

Optional Solvent Concentration Solvent Mass 1 mg 5 mg 10 mg 25 mg
DMSO 1 mM 2.5757 mL 12.8783 mL 25.7566 mL 64.3915 mL
5 mM 0.5151 mL 2.5757 mL 5.1513 mL 12.8783 mL
10 mM 0.2576 mL 1.2878 mL 2.5757 mL 6.4392 mL
15 mM 0.1717 mL 0.8586 mL 1.7171 mL 4.2928 mL
20 mM 0.1288 mL 0.6439 mL 1.2878 mL 3.2196 mL
25 mM 0.1030 mL 0.5151 mL 1.0303 mL 2.5757 mL
30 mM 0.0859 mL 0.4293 mL 0.8586 mL 2.1464 mL
40 mM 0.0644 mL 0.3220 mL 0.6439 mL 1.6098 mL
50 mM 0.0515 mL 0.2576 mL 0.5151 mL 1.2878 mL
60 mM 0.0429 mL 0.2146 mL 0.4293 mL 1.0732 mL
80 mM 0.0322 mL 0.1610 mL 0.3220 mL 0.8049 mL
100 mM 0.0258 mL 0.1288 mL 0.2576 mL 0.6439 mL
  • No file chosen (Maximum size is: 1024 Kb)
  • If you have published this work, please enter the PubMed ID.
  • Your name will appear on the site.
  • Molarity Calculator

  • Dilution Calculator

The molarity calculator equation

Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)

質量   濃度   体積   分子量 *
= × ×

The dilution calculator equation

Concentration (start) × Volume (start) = Concentration (final) × Volume (final)

一般には略語で表示されます:C1V1 = C2V2

濃度 (開始) × 体積 (開始) = 濃度 (終了) × 体積 (終了)
× = ×
C1   V1   C2   V2
Help & FAQs
  • Do most proteins show cross-species activity?

    Species cross-reactivity must be investigated individually for each product. Many human cytokines will produce a nice response in mouse cell lines, and many mouse proteins will show activity on human cells. Other proteins may have a lower specific activity when used in the opposite species.

最近チェックした製品:

オンラインお問い合わせ

Your information is safe with us. * Required Fields.

製品名

 

カスタマ需要量 *

お名前 *

 

タイトル

メールアドレス *

 

電話番号 *

デパートメント

 

組纖名 *

市区町村

都道府県

国或いは地域 *

     

必ず会社名を記載ください。個人への返信は行いません。

備考

バルクお問い合わせ

Inquiry Information

製品名:
CCMI
製品番号:
HY-12150
数量:
MCE 日本正規代理店: