ReACp53
Based on 2 publication(s) in Google Scholar
ReACp53 could inhibit p53 amyloid formation and rescue p53 function in cancer cell lines.
Nur für Forschungszwecke. Wir verkaufen nicht an Patienten.
- Reinheit: 99.32%
- Formel: C108H206N52O24
- Molecular Weight:2617.13
-
Speicherung:
Sealed storage, away from moisture.
Powder -80°C, 2 years , -20°C, 1 year* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Biologische Aktivität
-
Chemical Information
-
Lösungsmittel & Löslichkeit
- Protokoll
- Reinheit & Dokumentation
- Verweise
-
Help & FAQs
Publications Citing Use of MedChemExpress (MCE) ReACp53
More
Biologische Aktivität
p53 amyloid formation[1].
ReACp53 penetrates into HGSOC primary cancer cells and converts mutant p53 from a punctate state into soluble WT-like p53. ReACp53 also induces cancer cell death, cell cycle arrest and results in p53 degradation. ReACp53 specifically affects cell viability and proliferation of cancer cells bearing mutant p53 but not wild type when grown as organoids[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Chemical Information
-
Appearance Solid
-
Molecular Weight 2617.13
-
Formel C108H206N52O24
-
Color White to off-white
-
Sequence
Arg-Arg-Arg-Arg-Arg-Arg-Arg-Arg-Arg-Arg-Pro-Ile-Leu-Thr-Arg-Ile-Thr-Leu-Glu
-
Sequence Shortening
RRRRRRRRRRPILTRITLE
-
Versand
Room temperature in continental US; may vary elsewhere.
-
Speicherung
Sealed storage, away from moisture
Powder -80°C 2 years -20°C 1 year * In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
Publications (2)
-
Journal Impact Factor
-
Most Recent
-
iScience
Acetylation halts missense mutant p53 aggregation and rescues tumor suppression in non-small cell lung cancers. [Abstract]2023 May 30;26(7):107003. PMID: 37534137 -
Gene
Silence of linc00023 inhibits pyroptosis and promotes cell proliferation via regulating p53. [Abstract]2023 Oct 5:882:147628. PMID: 37429368
Lösungsmittel & Löslichkeit
DMSO : 100 mg/mL (38.21 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
H2O : 25 mg/mL (9.55 mM; Need ultrasonic)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.
Konzentration (Stammlösung) × Volumen (Stammlösung) = Konzentration (Ziellösung) × Volumen (Ziellösung)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (0.96 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.5 mg/mL (0.96 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
For the following dissolution methods, please prepare the working solution directly:
It is recommended to prepare fresh solutions and use them promptly within a short period of time.
The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: PBS
Solubility: 50 mg/mL (19.10 mM); Clear solution; Need ultrasonic
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Working solution concentration: 0.22 mg/mL
This product has good water solubility, please refer to the measured solubility data in water/PBS/Saline for details.
Protokoll
Mice[1]
In the minimal residual disease model, three cohorts of mice (n=3) are injected with a matrigel/OVCAR3 (p53 mutant) suspension on one flank and with a matrigel/MCF7 (WT p53) suspension on the other flank. Treatment is started the same day. In both models, the treatment phase consist of three weeks of daily IP injections with 15 mg/kg of ReACp53, sequence-scrambled control peptide or vehicle alone[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Reinheit & Dokumentation
-
Data Sheet (276 KB)
-
SDS (252 KB)
- English - EN (252 KB)
- Français - FR (252 KB)
- Deutsch - DE (252 KB)
- Norwegian - NO (252 KB)
- Español - ES (252 KB)
- Swedish - SV (252 KB)
- Italian - IT (252 KB)
- Korean - KR (252 KB)
- Portuguese - PT (252 KB)
-
Handling Instructions (2659 KB)
Verweise
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| H2O / DMSO | 1 mM | 0.3821 mL | 1.9105 mL | 3.8210 mL | 9.5524 mL |
| 5 mM | 0.0764 mL | 0.3821 mL | 0.7642 mL | 1.9105 mL | |
| DMSO | 10 mM | 0.0382 mL | 0.1910 mL | 0.3821 mL | 0.9552 mL |
| 15 mM | 0.0255 mL | 0.1274 mL | 0.2547 mL | 0.6368 mL | |
| 20 mM | 0.0191 mL | 0.0955 mL | 0.1910 mL | 0.4776 mL | |
| 25 mM | 0.0153 mL | 0.0764 mL | 0.1528 mL | 0.3821 mL | |
| 30 mM | 0.0127 mL | 0.0637 mL | 0.1274 mL | 0.3184 mL |
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.
ReACp53 Related Classifications
HY-P0121 Related Classifications
Powered by Bioz