(+)-Bornyl acetate
Based on 1 Customer Validation
(+)-Bornyl acetate is a volatile organic compound and a characteristic component of coniferous tree essential oils, including pine needle essential oil. (+)-Bornyl acetate exerts a strong inhibitory effect on root growth of Arabidopsis thaliana seedlings. (+)-Bornyl acetate can induce adult male Periplaneta americana to exhibit sexual behavior and possesses sex pheromone-like activity.
Nur für Forschungszwecke. Wir verkaufen nicht an Patienten.
- Reinheit : 98.0%
- CAS. Nr.: 20347-65-3
- Formel: C12H20O2
- Molecular Weight:196.29
-
Speicherung:
-20°C, protect from light
* In solvent : -80°C, 6 months; -20°C, 1 month (protect from light)
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Biologische Aktivität
-
Chemical Information
-
Lösungsmittel & Löslichkeit
- Reinheit & Dokumentation
- Verweise
-
Help & FAQs
Biologische Aktivität
Beschreibung
In Vitro
(+)-Bornyl acetate (5-30 μmol; 4 days) dose-dependently inhibits root growth and induces wavy root morphology in Arabidopsis thaliana (ecotype Columbia) seedlings[1].
(+)-Bornyl acetate (0.2 g per flask; 7-10 days) undergoes microbiological hydroxylation by Helminthosporium sativum cultures almost exclusively at the C(5) position, producing (+)-5-exo-hydroxyborneol (primary product with yields up to 56%) and (+)-5-endo-hydroxyborneol, with minimal formation of (+)-3-exo-hydroxyborneol[2].
(+)-Bornyl acetate (1.0 g per flask; 18 days) undergoes microbiological hydroxylation by Fusarium culmorum cultures regiospecifically at the C(5) position to form 5-exo-hydroxybornyl acetate (yield ~12%) without hydrolysis of the acetoxy group[2].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only. .
In Vivo
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Animal Model:adult males (isolated from females for ≥1 month)[3]
-
Dosage:0.01 mg; 0.02 mg; 0.05 mg; 0.10 mg
-
Administration:olfactory exposure; single administration per test
-
Result:Induced sexual display in an average of 8 out of 25 male cockroaches at 0.05 mg.
Recorded male EAG amplitude of 0.14 mV at 0.01 mg, 0.24 mV at 0.02 mg, 0.61 mV at 0.05 mg, and 0.84 mV at 0.10 mg.
Recorded female EAG amplitude of 0.08 mV at 0.01 mg, 0.10 mV at 0.02 mg, 0.18 mV at 0.05 mg, and 0.21 mV at 0.10 mg.
Achieved an M/F ratio of 3.2 at 0.05 mg, and an M/F ratio index (normalized to camphor) of 1.5.
Chemical Information
-
CAS. Nr. 20347-65-3
-
Appearance Oil
-
Molecular Weight 196.29
-
Formel C12H20O2
-
Color Colorless to light yellow
-
SMILES
CC1(C)[C@]2(C)[C@@H](OC(C)=O)C[C@@]1([H])CC2
-
Structure Classification
-
Initial Source
-
Versand
Room temperature in continental US; may vary elsewhere.
-
Speicherung
-20°C, protect from light
* In solvent : -80°C, 6 months; -20°C, 1 month (protect from light)
Lösungsmittel & Löslichkeit
In Vitro:
DMSO : 100 mg/mL (509.45 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Konzentration (Stammlösung) × Volumen (Stammlösung) = Konzentration (Ziellösung) × Volumen (Ziellösung)
In Vivo:
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.5 mg/mL (12.74 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
In Vivo Dissolution Calculator
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL. * In solvent : -80°C, 6 months; -20°C, 1 month (protect from light)
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Reinheit & Dokumentation
-
Data Sheet (288 KB)
-
SDS (252 KB)
- English - EN (252 KB)
- Français - FR (252 KB)
- Deutsch - DE (252 KB)
- Norwegian - NO (252 KB)
- Español - ES (252 KB)
- Swedish - SV (252 KB)
- Italian - IT (252 KB)
- Korean - KR (252 KB)
- Portuguese - PT (252 KB)
-
Handling Instructions (2659 KB)
Verweise
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 5.0945 mL | 25.4725 mL | 50.9450 mL | 127.3626 mL |
| 5 mM | 1.0189 mL | 5.0945 mL | 10.1890 mL | 25.4725 mL | |
| 10 mM | 0.5095 mL | 2.5473 mL | 5.0945 mL | 12.7363 mL | |
| 15 mM | 0.3396 mL | 1.6982 mL | 3.3963 mL | 8.4908 mL | |
| 20 mM | 0.2547 mL | 1.2736 mL | 2.5473 mL | 6.3681 mL | |
| 25 mM | 0.2038 mL | 1.0189 mL | 2.0378 mL | 5.0945 mL | |
| 30 mM | 0.1698 mL | 0.8491 mL | 1.6982 mL | 4.2454 mL | |
| 40 mM | 0.1274 mL | 0.6368 mL | 1.2736 mL | 3.1841 mL | |
| 50 mM | 0.1019 mL | 0.5095 mL | 1.0189 mL | 2.5473 mL | |
| 60 mM | 0.0849 mL | 0.4245 mL | 0.8491 mL | 2.1227 mL | |
| 80 mM | 0.0637 mL | 0.3184 mL | 0.6368 mL | 1.5920 mL | |
| 100 mM | 0.0509 mL | 0.2547 mL | 0.5095 mL | 1.2736 mL |
(+)-Bornyl acetate Related Classifications
HY-B1918 Related Classifications
Powered by Bioz