Clopyralid
Based on 1 publication(s) in Google Scholar
Clopyralid is a selective pyridine carboxylic acid auxin-type herbicide that mimics plant auxins to trigger abnormal growth and subsequent death of target plants. Clopyralid is a nitrite reductase inhibitor that impairs nitrite reduction and reduces NADH. Clopyralid entering aquatic environments interferes with microbial denitrification, induces oxidative damage and nitrite accumulation, and alters microbial community diversity and composition. Clopyralid can be used for related research on farmland control.
Nur für Forschungszwecke. Wir verkaufen nicht an Patienten.
- Reinheit : 98.52%
- CAS. Nr.: 1702-17-6
- Formel: C6H3Cl2NO2
- Molecular Weight:192.00
-
Speicherung:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 6 months , -20°C, 1 month
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Biologische Aktivität
-
Chemical Information
-
Lösungsmittel & Löslichkeit
- Protokoll
- Reinheit & Dokumentation
- Verweise
-
Help & FAQs
-
HY-W018749R
Clopyralid (Standard)Reference Standard -
HY-B2011
FlutolanilFungicide -
HY-121265
Bendiocarb -
HY-21200
Perfluoroheptanesulfonic acidPerfluoroalkyl Compounds -
HY-130189
S-Phenylmercapturic acidBenzene Metabolite -
HY-130189R
S-Phenylmercapturic acid (Standard)Benzene Metabolite -
HY-B2049
TriflumuronChitin Synthesis Inhibitor -
HY-B2061
VinclozolinFungicide -
HY-B2011R
Flutolanil (Standard)Standard -
HY-121265R
Bendiocarb (Standard) -
HY-B2049R
Triflumuron (Standard)Chitin Synthesis Inhibitor -
HY-170513
3'-Ethoxy-5,6-dihydrospinosyn J 17-pseudoaglyconeInsecticide
Publications Citing Use of MedChemExpress (MCE) Clopyralid
More
Biologische Aktivität
Beschreibung
In Vitro
Clopyralid (0.25-60 mg/L; stages II-VII) inhibits NIR but not NAR in denitrifying activated sludge, inhibiting carbon metabolism and electron transfer[1].
Clopyralid causes the denitrifying sludge community diversity to exhibit a U-shaped change pattern and enriches specific taxa such as Thauera, Acinetobacter, and Shinella at higher exposure levels[1].
Clopyralid is a selective pyridine carboxylic acid auxin-type herbicide that mimics plant auxins to trigger abnormal growth and subsequent death of target plants; it also undergoes rapid dissipation in subtropical loam following first-order kinetics, with a half-life of 13.39 days[2].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Chemical Information
-
CAS. Nr. 1702-17-6
-
Appearance Solid
-
Molecular Weight 192.00
-
Formel C6H3Cl2NO2
-
Color White to off-white
-
SMILES
ClC1=C(C(O)=O)N=C(Cl)C=C1
-
Versand
Room temperature in continental US; may vary elsewhere.
-
Speicherung
Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
Publications (1)
-
Journal Impact Factor
-
Most Recent
-
Anal Chem
Exposome-Scale Investigation of Cl-/Br-Containing Chemicals Using High-Resolution Mass Spectrometry, Multistage Machine Learning, and Cloud Computing. [Abstract]2025 Jun 3;97(21):11099-11109. PMID: 40401576
Lösungsmittel & Löslichkeit
In Vitro:
DMSO : 100 mg/mL (520.83 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Konzentration (Stammlösung) × Volumen (Stammlösung) = Konzentration (Ziellösung) × Volumen (Ziellösung)
In Vivo:
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (13.02 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.5 mg/mL (13.02 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
In Vivo Dissolution Calculator
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Reinheit & Dokumentation
-
Data Sheet (286 KB)
-
SDS (416 KB)
- English - EN (416 KB)
- Français - FR (416 KB)
- Deutsch - DE (416 KB)
- Norwegian - NO (416 KB)
- Español - ES (416 KB)
- Swedish - SV (416 KB)
- Italian - IT (416 KB)
- Korean - KR (416 KB)
- Portuguese - PT (416 KB)
-
Handling Instructions (2659 KB)
Verweise
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 5.2083 mL | 26.0417 mL | 52.0833 mL | 130.2083 mL |
| 5 mM | 1.0417 mL | 5.2083 mL | 10.4167 mL | 26.0417 mL | |
| 10 mM | 0.5208 mL | 2.6042 mL | 5.2083 mL | 13.0208 mL | |
| 15 mM | 0.3472 mL | 1.7361 mL | 3.4722 mL | 8.6806 mL | |
| 20 mM | 0.2604 mL | 1.3021 mL | 2.6042 mL | 6.5104 mL | |
| 25 mM | 0.2083 mL | 1.0417 mL | 2.0833 mL | 5.2083 mL | |
| 30 mM | 0.1736 mL | 0.8681 mL | 1.7361 mL | 4.3403 mL | |
| 40 mM | 0.1302 mL | 0.6510 mL | 1.3021 mL | 3.2552 mL | |
| 50 mM | 0.1042 mL | 0.5208 mL | 1.0417 mL | 2.6042 mL | |
| 60 mM | 0.0868 mL | 0.4340 mL | 0.8681 mL | 2.1701 mL | |
| 80 mM | 0.0651 mL | 0.3255 mL | 0.6510 mL | 1.6276 mL | |
| 100 mM | 0.0521 mL | 0.2604 mL | 0.5208 mL | 1.3021 mL |
Clopyralid Related Classifications
HY-W018749 Related Classifications
Powered by Bioz