Ioxilan
Based on 1 publication(s) in Google Scholar
Ioxilan is a low-osmolar, nonionic and tri-iodinated diagnostic contrast agent. Ioxilan is also an X-ray contrast agent for excretory urography and contrast enhanced computed tomographic (CECT) imaging of the head and body. Intravascular injection results in opacification of vessels in the path of flow of the contrast medium, permitting radiographic visualization of the internal structures of the human body until significant hemodilution occurs.
Nur für Forschungszwecke. Wir verkaufen nicht an Patienten.
- Reinheit: 98.04%
- CAS. Nr.: 107793-72-6
- Formel: C18H24I3N3O8
- Molecular Weight:791.11
-
Speicherung:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 2 years , -20°C, 1 year
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Biologische Aktivität
-
Chemical Information
-
Lösungsmittel & Löslichkeit
- Reinheit & Dokumentation
- Verweise
-
Help & FAQs
Publications Citing Use of MedChemExpress (MCE) Ioxilan
More
Biologische Aktivität
As a low-osmolar nonionic monomer, Ioxilan increases the safety and tolerance of X-ray contrast agents. The development of Ioxilan is based on the introduction of a double methylene as a hydrophobic region and masking it with a hydrophilic hydroxyl group could lower the osmolality without adversely affecting the biological tolerance[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Chemical Information
-
CAS. Nr. 107793-72-6
-
Appearance Solid
-
Molecular Weight 791.11
-
Formel C18H24I3N3O8
-
Color White to off-white
-
SMILES
O=C(C1=C(I)C(N(C(C)=O)CC(O)CO)=C(I)C(C(NCCO)=O)=C1I)NCC(O)CO
-
Versand
Room temperature in continental US; may vary elsewhere.
-
Speicherung
Powder -20°C 3 years 4°C 2 years In solvent -80°C 2 years -20°C 1 year
Publications (1)
-
Journal Impact Factor
-
Most Recent
-
Cell Rep
ZDHHC3-mediated SCAP S-acylation promotes cholesterol biosynthesis and tumor immune escape in hepatocellular carcinoma. [Abstract]2024 Nov 9;43(11):114962. PMID: 39522165
Lösungsmittel & Löslichkeit
DMSO : 100 mg/mL (126.40 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
Konzentration (Stammlösung) × Volumen (Stammlösung) = Konzentration (Ziellösung) × Volumen (Ziellösung)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.08 mg/mL (2.63 mM); Clear solution
This protocol yields a clear solution of ≥ 2.08 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (20.8 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.08 mg/mL (2.63 mM); Clear solution
This protocol yields a clear solution of ≥ 2.08 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (20.8 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Reinheit & Dokumentation
-
Data Sheet (275 KB)
-
SDS (393 KB)
- English - EN (393 KB)
- Français - FR (393 KB)
- Deutsch - DE (393 KB)
- Norwegian - NO (393 KB)
- Español - ES (393 KB)
- Swedish - SV (393 KB)
- Italian - IT (393 KB)
- Korean - KR (393 KB)
- Portuguese - PT (393 KB)
-
Handling Instructions (2659 KB)
Verweise
[1]. Cheng KT. Ioxilan carbonate particles. National Center for Biotechnology Information (US); 2004-2013. 2007 Sep 1. [Content Brief]
[2]. Chow SL, et al. Effect of iodixanol and ioxilan on QT interval and renal function in patients with systolic heart failure. Int J Cardiol. 2012 Jan 12;154(1):17-21. [Content Brief]
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 1.2640 mL | 6.3202 mL | 12.6405 mL | 31.6012 mL |
| 5 mM | 0.2528 mL | 1.2640 mL | 2.5281 mL | 6.3202 mL | |
| 10 mM | 0.1264 mL | 0.6320 mL | 1.2640 mL | 3.1601 mL | |
| 15 mM | 0.0843 mL | 0.4213 mL | 0.8427 mL | 2.1067 mL | |
| 20 mM | 0.0632 mL | 0.3160 mL | 0.6320 mL | 1.5801 mL | |
| 25 mM | 0.0506 mL | 0.2528 mL | 0.5056 mL | 1.2640 mL | |
| 30 mM | 0.0421 mL | 0.2107 mL | 0.4213 mL | 1.0534 mL | |
| 40 mM | 0.0316 mL | 0.1580 mL | 0.3160 mL | 0.7900 mL | |
| 50 mM | 0.0253 mL | 0.1264 mL | 0.2528 mL | 0.6320 mL | |
| 60 mM | 0.0211 mL | 0.1053 mL | 0.2107 mL | 0.5267 mL | |
| 80 mM | 0.0158 mL | 0.0790 mL | 0.1580 mL | 0.3950 mL | |
| 100 mM | 0.0126 mL | 0.0632 mL | 0.1264 mL | 0.3160 mL |
Ioxilan Related Classifications
HY-109513 Related Classifications
Powered by Bioz